cooling RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Owner's Guide
Page 185 of 208
COOLING
Water pump
CLEANING
It is very important not to scratch the gasket faces
of all aluminium components.
Use the product Décapjoint to dissolve the part
of the gasket which remains attached.
Apply the product to the part to be cleaned, wait
approximately 10 minutes, then remove it using a
wooden spatula.
The wearing of gloves is recommended during
this operation.
REFITTING
Refitting is the reverse of removal.
Refit and tension the accessories belt. (see section
07 "Accessories belt tension").
Fill and bleed the cooling circuit (see section 19
"Filling and bleeding").
19F8Q Engine
- the bolts mounting the water pump and extract
this from above.
13089S
19-11