SSANGYONG KORANDO 2012 Service Manual

04-91740-01
4. INPUT/OUTPUT DEVICES

04-10
5. CIRCUIT DIAGRAM

03-32221-01
1. SPECIFICATION
Unit Specification
Fuel systemFuel Unleaded gasoline
Fuel injection MPI (Muilt Point Injecter) type
Fuel supply Returnless Fuel System
Fuel tankCapacity 57 L
Material Plastic
Fuel sender Dual sender type
Fuel filter Service interval Change every 100,000 km
Fuel pump Pressure 3.8 bar
InjectorColor Black
Capacity 187.2 g/min

03-4
2. SYSTEM LAYOUT
Fuel tank assy
Fuel tank strap assy
Heat shield assy
Sub sender assy
Main fuel pump assy
Fuel filler assy
Fuel filler cap assy
Feed tube assy
Return tube assy 1.
3.
4.
5.
6.
7.
8.
9.
10.Suction tube assy
Harness wiring assy
Fuel pump plate cover
O-ring
clamp
Nut
Nut
Screw 11.
12.
13.
14.
20.
21.
22.
23.

03-52221-01
Fuel Filter Assy
Bolt
Fuel Return Pipe
Fuel Supply pipe
Fuel Vapor Pipe Assy
Canister Compl
Fuel line Holder
Fuel line Holder 1.
2.
3.
4.
6.
9.
14.
15.

03-6
Returnless Type
1. OVERVIEW
The fuel system is a returnless type that the fuel pressure regulator is mounted inside the fuel tank.
The engine ECU controls the fuel injection in each injector electronically.
According to the engine loads, the engine ECU draws or cuts off the evaporated gas in canister into the
combustion chamber. The fuel system consists of fuel tank, fuel lines, fuel pump and fuel pressure
regulator.
Fuel supply line to
sub tank
Fuel return lineFuel supply line
Maintain 3.8 bar

03-8
Fuel pump and fuel sender assembly
2. COMPONENTS
CanisterFuel filter
Fuel tank assembly
Primary fuel
sender
Fuel tank assembly
Fuel neck hose
CanisterFuel filter

03-92221-01
Engine ECU
Engine compartment
InjectorPurge control solenoid
valveFuel rail
Secondary fuel sender

03-10
3. SCHEMATIC DIAGRAM OF FUEL FLOWS