Specification SSANGYONG TURISMO 2013 Owner's Manual
Page 298 of 796
11-31461-01
1. SPECIFICATION
Description Specification
Capacity 12V 2.3kW
Engagement Meshed type
Rotating direction Clockwise
Pinion gear manufacturing Cooled forging
Solenoid operating voltage Max. 8 V
Weight 2.5 kg
Bracket manufacturing Aluminum die casting
Page 310 of 796
13-31793-00
1. SPECIFICATION
Item Specification
E-EGR valve Motor EGR response time 50 ms
Driven by DC motor
Valve EGR gas flow rate 120 Kg/h
Position sensor Sensing type Hole sensor
Supplied voltage5V ± 10%
Maximum signal
range5% ~ 95%
Maximum power
consumption＜15mA
E-EGR cooler Cooling capacity 8.3 kW or more
Cooling fin type Wavy fin
Cooler type U-shaped
E-EGR bypass valve Driven by Vacuum
(Solenoid valve)
Page 383 of 796
02-31113-01
1. SPECIFICATIONS
1) Engine Specifications
Page 386 of 796
02-6
3. FASTENER TIGHTENING SPECIFICATIONS
Page 387 of 796
02-71113-01
1) Fastener Tightening Specifications (Cont'd)
Page 388 of 796
03-32211-22
1. FUEL SYSTEM SPECIFICATION
Use Only Unleaded Fuel Rated at 89 Octane or Higher ▶
Fuel quality and additives contained in fuel have a significant effect on power output, drivability, and life
of the engine. Fuel with too low an octane number can cause engine knock.
Do Not Use Methanol ▶
Fuels containing methanol (wood alcohol) should not be used in vehicle.
This type of fuel can reduce vehicle performance and damage components of the fuel system.
Vehicle Fueling from Drums or Storage Containers ▶
For safety reasons (particularly when using noncommercial fueling systems) fuel containers, pumps
and hoses must be properly earthed. Static electricity build up can occur under certain atmospheric
and fuel flow conditions if unearthed hoses, particularly plastic, are fitted to the fuel-dispensing pump.
It is therefore recommended that earthed pumps with integrally earthed hoses be used, and that
storage containers be properly earthed during all noncommercial fueling operations.
Page 392 of 796
05-4
4. FASTENER TIGHTENING SPECIFICATIONS
Page 395 of 796
07-32110-01
1. GENERAL SPECIFICATIONS
Page 397 of 796
07-52110-01
3. FASTENER TIGHTENING SPECIFICATIONS
Page 401 of 796
08-31452-01
1. GENERAL SPECIFICATIONS