TOYOTA AURIS HYBRID 2012 Owners Manual

311 3-4. Using the hands-free phone system (for cellular phone)
3
Interior features
UK_AURIS_HV_EE
Conditions affecting operation
The hands-free phone system may not operate normally in the following situ-
ations:
The cellular phone is turned off, or located outside the service area.
The cellular phone has a low battery.
The cellular phone is not connected to the system.
The cellular phone is behind the seat or in the glove box, or metal mate-
rial covers or touches the phone.
When transferring ownership of the vehicle
Be sure to initialize the system to prevent personal data from being improp-
erly accessed.
Required profiles for the cellular phone
HFP (Hands Free Profile) Ver. 1.0 or higher (Conformed: Ver. 1.5)
OPP (Object Push Profile) Ver. 1.1
About Bluetooth
®
Bluetooth is a registered trademark of
Bluetooth SIG. Inc.

312 3-4. Using the hands-free phone system (for cellular phone)
UK_AURIS_HV_EE
Certification for the hands-free phone system

313 3-4. Using the hands-free phone system (for cellular phone)
3
Interior features
UK_AURIS_HV_EE
CAUTION
Caution while driving
Do not use a cellular phone, or connect the Bluetooth
® phone.
NOTICE
To prevent damage to a cellular phone
Do not leave a cellular phone in the vehicle. The temperature inside may
become high resulting in damage to the phone.

314
3-4. Using the hands-free phone system (for cellular phone)
UK_AURIS_HV_EE
Using the hands-free phone system (for cellular phone)
: If equipped
Audio unit
Display
A message, name, phone
number, etc. is displayed.
Lower-case characters and
special characters cannot be
displayed.
Displays information that is
too long to be displayed at
one time on the display
(press and hold)
Selects speed dials
Selects items such as menu
or number
Turn: Selects an item
Press: Inputs the selected
item
Bluetooth
® connection con-
dition and reception level
If “BT” is not displayed, the
hands-free phone system
cannot be used.

315 3-4. Using the hands-free phone system (for cellular phone)
3
Interior features
UK_AURIS_HV_EE
Steering wheel
Vo l u m e
The voice guidance volume
cannot be adjusted using
this button.
On-hook switch
Turns the hands-free sys-
tem off/ends a call/refuses a
call
Off-hook switch
Turns the hands-free sys-
tem on/starts a call
Talk switch
Turns the voice command
system on (press)/turns the
voice command system off
(press and hold)
Microphone

316 3-4. Using the hands-free phone system (for cellular phone)
UK_AURIS_HV_EE
Using the hands-free phone system for the first time
Before using the hands-free phone system, it is necessary to register
a cellular phone in the system. The phone registration mode will be
entered automatically when starting the system with no cellular
phone registered. Follow the procedure below to register a cellular
phone:
Press the off-hook switch or the talk switch.
Select “Pair Phone” using .
Select “Record Name” using , and say the name to be
registered after the beep.
The name to be registered will be repeated aloud.
Select “Confirm” using .
Registration to the hands-free phone system only
Select “Phone Only” using .
Registration to the hands-free phone system and Bluetooth
® audio
system at the same time
Select “Int. Audio” using .
A passkey will be displayed.
Input the passkey into the cellular phone.
Refer to the manual that comes with the cellular phone for the oper-
ation of the phone.
STEP1
STEP2
STEP3
STEP4
STEP5
STEP5
STEP6

317 3-4. Using the hands-free phone system (for cellular phone)
3
Interior features
UK_AURIS_HV_EE
Menu list of the hands-free phone system
Normal operation
First menuSecond
menuThird menuOperation detail
“Callback” - -Dialing a number stored in
the incoming call history
memory
“Redial” - -Dialing a number stored in
the outgoing call history
memory
“Phonebook”
“Add
Entry”- Adding a new number
“Change
Name”-Changing a name in the
phone book
“Delete
Entry”-Deleting the phone book
data
“Del Spd
Dial”-Deleting a registered speed
dial
“List
Names”- Listing the phone book data
“Speed
Dial”- Registering a speed dial

318 3-4. Using the hands-free phone system (for cellular phone)
UK_AURIS_HV_EE
“Setup”“Security”“Set PIN” Setting a PIN code
“Phbk Lock” Locking the phone book
“Phbk Unlock” Unlocking the phone book
“Phone
Setup”“Pair Phone”Registering the cellular
phone to be used
“Change Name”Changing a registered name
of a cellular phone
“Delete Phone”Deleting a registered cellular
phone
“List Phones”Listing the registered cellular
phones
“Select Phone”Selecting a cellular phone to
be used
“Set Passkey” Changing the passkey
“Hands-free
power”Setting a Hands-free power
on/off
“System
Setup”“Playback Vol” Setting playback volume
“Device Name”Displaying a device informa-
tion
“Initialize” Initialization
First menuSecond
menuThird menuOperation detail

319 3-4. Using the hands-free phone system (for cellular phone)
3
Interior features
UK_AURIS_HV_EE
Automatic volume adjustment
When vehicle speed is 80 km/h (50 mph) or more, the volume automatically
increases. The volume returns to the previous volume setting when vehicle
speed drops to 70 km/h (43 mph) or less.
When using a voice command
For numbers, say a combination of single digits from zero to nine, # (pound),
 (star), and + (plus).
Say a command correctly and clearly.
Situations that the system may not recognize your voice
When driving on a rough road
When driving at high speeds
When air is blowing out of the vents onto the microphone
When the air conditioning fan emits a loud noise
Operations that cannot be performed while driving
Operating the system with
Registering a cellular phone to the system
Changing the passkey
P. 325

320
3-4. Using the hands-free phone system (for cellular phone)
UK_AURIS_HV_EE
Making a phone call
Dialing by inputting a name
Press the talk switch and say a registered name after the
beep.
The desired name or number is displayed.
Dial by one of the following methods:
a. Press the off-hook switch.
b. Select “Dial” using .
: If equipped
Making a phone call
Dialing by inputting a name
Speed dialing
Dialing a number stored in the outgoing history memory
“Redial”
Dialing a number stored in the incoming history memory
“Call back”
Receiving a phone call
Answering the phone
Refusing the call
Transferring a call
Using the call history memory
Dialing
Storing data in the phone book
Deleting
STEP1
STEP2