TOYOTA LAND CRUISER 2008 J200 Owners Manual

265
3−2. Using the audio system
3
Interior features
Using the CD player
Insert a CD or press with a CD inserted.
LOAD
TYPEDISCSEEKTRACK
AMSATFMDISCAUXTRAF
12 3 4 56
TUNEFILE
PUSHAUDIO CONTROL
PWRVOL
TEXTSCAN
RAND RPT
1234 56DISCASLSCAN ADS FLD FILETR TRAFST MSGART
FORDER
PWRVOLSCANPWRVOLSCAN
ITY32C005
Search playback
CD eject
Random playbackRepeat play CD slot
CD insert
Display text message
CD selection Playback
Selecting a track,
fast forwarding
or reversing
Power Volume

266 3−2. Using the audio system
Loading a CDs
nLoading a single CD
Press .
“WAIT” appears on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
nLoading multiple CDs
Press and hold until you hear a beep.
“WAIT” appears on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
The indicator on the slot turns to amber when the CD is inserted.
Insert the next CD when the indicator on the slot turns from
amber to green again.
Repeat the procedure for the remaining CDs.
To cancel the operation, press or . If you do not
insert a CD within 15 seconds, loading will be canceled automati−
cally.
STEP1
STEP 2
STEP 1
STEP 2
STEP 3

267
3−2. Using the audio system
3
Interior features
Ejecting CDs
nEjecting a CD
To select the CD to be ejected, press “ ” or “ ” on
.
The number of the CD selected is shown on the display.
Press and remove the CD.
nEjecting all CDs
Press and hold until you hear a beep, then remove the
CDs.
Selecting a CD
nTo select a CD to play
Press “
” or “” on until the desired CD number
appears on the display.
nTo scan loaded CDs
Press and hold until you hear a beep.
The first 10 seconds of the first track on each CD will be played.
Press once again when the desired CD is
reached.
Selecting a track
Press “ ” to move up or “ ” to move down using
until the desired track number appears on the display.
STEP1
STEP 2
STEP 1
STEP 2

268 3−2. Using the audio system
Fast forwarding and rewinding tracks
Press and hold “ ” or “
” on .
Scanning a CD
Press .
“SCAN” appears on the display.
The first 10 seconds of each track will be played.
Press once again when the desired track is
reached.
Random playback
nCurrent CD
Touch (RAND).
Tracks are played in random order until the button is pressed once
again.
nAll CDs
Press and hold (RAND) until you hear a beep.
Tracks on all loaded CDs are played in random order until the button is
pressed once again.
Repeating a track or a disc
nRepeating a track
Press (RPT).
n
Repeating a disc
Press and hold (RPT) until you hear a beep.
STEP1
STEP 2

269
3−2. Using the audio system
3
Interior features
Switching the display
Press .
Each time the button is pressed, the display changes in the order of Track
no./Elapsed time
CD title
Track name.

270 3−2. Using the audio system
nDisplay
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding for 1
second or more will display the remaining characters.
A maximum of 24 characters can be displayed.
If is pressed for 1 second or more again or has not been pressed
for 6 seconds or more, the display will return to the first 12 characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
nCanceling random, repeat and scan playback
Press
(RAND),
(RPT) or again.
nError messages
“ERROR”: This indicates a trouble either in the CD or inside the player.
The CD may be dirty, damaged or inserted up−side down.
nDiscs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea−
tures, or due to scratches, dirt or deterioration.
CDs with copy−protect features may not play correctly.
nCD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected.
n
If CDs are left inside the CD pla yer or in the ejected position for
extended periods
CDs may be damaged and may not play properly.
n
Lens cleaners
Do not use lens cleaners. Doing so may damage the CD player.

271
3−2. Using the audio system
3
Interior features
NOTICE
nCDs and adapters that cannot be used
Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual
Disc.
Doing so may damage the player and/or the CD insert/eject function.
lCDs that have a diameter that is not 4.7
in. (12 cm).
lLow−quality and deformed CDs.
lCDs with a transparent or translucent
recording area.
l
CDs that have tape, stickers or CD−R
labels attached to them, or that have
the label peeled off.

272 3−2. Using the audio system
NOTICE
nPlayer precautions
Failure to follow the precautions below may result in damage to the CDs or
the player itself.
lDo not insert anything other than CDs into the CD slot.
lDo not apply oil to the player.
lStore CDs away from direct sunlight.
l
Never try to disassemble any part of the player.
lDo not insert more than one CD at a
time.

273
3−2. Using the audio system
3
Interior features
Playing back MP3 and WMA discs
Loading and ejecting MP3 and WMA discs
Refer to the section entitled “Using the CD player” for details.
(
P. 265)
Selecting a CD
Refer to the section entitled “Using the CD player” for details.
(
P. 265)
Insert an MP3 or WMA disc or press with a disc inserted.
LOAD
TYPEDISCSEEKTRACK
AMSATFMDISCAUXTRAF
12 3 4 56
TUNEFILE
PUSHAUDIO CONTROL
PWRVOL
TEXTSCAN
RAND RPT
1234 56DISCASLSCAN ADS FLD FILETR TRAFST MSGART
FORDER
PWRVOLSCANPWRVOLSCAN
ITY32C005Power Volume
CD eject Search playback
Random playbackRepeat playFolder selection
CD insert
File selection
Display text message
CD selection Playback
Selecting a file,
fast forwarding
or reversingCD slot

274 3−2. Using the audio system
Selecting and scanning a folder
nSelecting folders one at a time
Press (
) or ( ) to select the desired folder.
To return to the first folder, press and hold ( ) until you hear a
beep.
nSelecting the desired folder by cueing the first file of each
folder
Press and hold until you hear a beep.
When the desired folder is reached, press the switch once again.
Selecting and scanning a file
nSelecting one file at a time
Turn the dial or press “ ” or “ ” on to
select the desired file.
nSelecting the desired file by cueing the files in the folder
Press .
When the desired file is reached, press once again.
Fast forwarding and reversing files
Press and hold “
” or “” on .