TOYOTA YARIS 2019 Owners Manual (in English)

YARIS SEDAN_OM_OM99S50z_(U)
3514-3. Bluetooth®
4
Interior Features
●Pairing a Bluetooth® audio device which does not have a four-
digit PIN code
Using the audio control dial, select the pairing mode “PAIR
DEVICE” in the “BT SETUP” mode. (Refer to “Bluetooth
®
audio set up” for details.)
Press the audio control dial to determine the mode. After
“ENTER PIN” is displayed on the audio display for three sec-
onds, “PIN 0000” is displayed and the PIN code can be input.
Press the audio control dial while “PIN 0000” is displayed.
“PAIRING” flashes on the audio display.
Operate the Bluetooth
® audio device and set it to the pairing
mode while “PAIRING” is flashing.
As the Bluetooth
® audio device requires a PIN code, input
“0000”.
When the pairing is completed, and “PAIR SUCCESS”
are displayed after about 10-30 seconds, after which “PAIR
SUCCESS” continues to be displayed for three seconds, and
then the unit returns to the normal display.
If pairing cannot be completed, try “1234” instead. Refer to the
owner’s manual of your mobile device for the right PIN code.
Some Bluetooth
® audio devices need a certain amount of time before
the symbol is displayed.
1
2
3
4
5
6

352
YARIS SEDAN_OM_OM99S50z_(U)
4-3. Bluetooth®
●Device selection
If several devices have been paired, the Bluetooth
® unit links the
device last paired. If you would like to link a different paire d
device, it is necessary to change the link. The order of device pri-
ority after the link has been changed is maintained even when
the ignition is switched off.
Using the audio control dial , select the link change mode
“LINK CHANGE” in the “BT SETUP” mode. (Refer to “Blue-
tooth
® audio device set-up” for details.)
Press the audio control dia l to determine the mode.
The name of the currently linked Bluetooth
® audio device is
displayed. If no Bluetooth® audio device is currently linked, the
name of the first device among the paired devices is dis-
played.
Turn the audio control dial
to select the name of the
device you would like to
link.
Press the audio control dial to select the device you would lik e
to link. The symbol disappears, and “PAIRING” flashes
in the audio display.
When “GO BACK” is selected and the audio control dial is presse d,
the display returns to “LINK CHANGE”.
1
2
3
4
5

YARIS SEDAN_OM_OM99S50z_(U)
3534-3. Bluetooth®
4
Interior Features
If the link to the desired device is successful, the sym-
bol is displayed again, together with “LINK CHANGED”. “LINK
CHANGED” is displayed for three seconds, then it returns to
the normal display.
Some Bluetooth® audio devices need a certain amount of time before
the symbol is displayed.
● How to confirm the device currently linked
Switch to the link-change mode. ( Refer to “Changing the link to a
Bluetooth
® audio device”)
The device name displayed first is the device which is currentl y
linked.
● Deleting a device
Using the audio control dial, select the pairing delete mode
“PAIR DELETE” in the “BT SETUP” mode. (Refer to “Blue-
tooth
® audio device set-up” for details.)
Press the audio control dia l to determine the mode.
The name of the first device among the paired devices is dis-
played.
Rotate the audio control
dial and select the name of
the paired device you
would like to delete.
Only the names of paired
devices can be displayed. If
only one device is paired,
only the name for this device
is displayed.
If a selection other than “GO BACK” is made and the audio
control dial is pr essed, “SURE ? N O” is displayed.
6
1
2
3
4
5

354
YARIS SEDAN_OM_OM99S50z_(U)
4-3. Bluetooth®
Rotate the audio control dial clockwise and switch the display
to “SURE ? YES”.
The display changes as follows depending on whether the audio con-
trol dial is rotated clockwise or counterclockwise. • Clockwise: “SURE ? YES” displayed
• Counterclockwise: “SURE ? NO” displayed
Press the audio control dial to delete the selected device.
Select “GO BACK” and press the audio control dial to return to the
“PAIR DELETE” display.
“PAIR DELETED” is displayed fo r 3 seconds after the deletion
is completed, and then it retu rns to the normal display.
If an error occurs while trying to delete the paired device, “E rr”
flashes in the display for 3 seconds and the display returns to “LINK
DELETE”.
6
7
8

YARIS SEDAN_OM_OM99S50z_(U)
3554-3. Bluetooth®
4
Interior Features
●Bluetooth® audio device information display
Using the audio control dial, sel ect the pair device information
display mode “DEVICE INFO” in the “BT SETUP” mode.
(Refer to “Bluetooth
® audio device set-up” for details.)
Press the audio control dia l to determine the mode.
The name of the Bluetooth
® is displayed.
Rotate the audio control
dial to select the informa-
tion for the Bluetooth
® unit
which you would like to
view.
When “GO BACK” is selected
and the audio control dial is
pressed, the display returns
to “DEVICE INFO”.
■ Pairing a Bluetooth® audio device
● If the pairing failed, “Err” flashes for three seconds.
● Pairing cannot be performed while the vehicle is moving. If you attempt to
perform pairing while the vehicle is moving, “PAIR DISABLE” is displayed.
● If seven Bluetooth
® audio devices have already been paired to the vehicle,
pairing cannot be performed and “MEMORY FULL” is displayed. Delete one
paired device to pair another one.
■ Bluetooth
® audio device selection
● If a hands-free type mobile phone has been the most recently paired device,
the Bluetooth
® unit links this device. If you would like to use a Bluetooth®
audio type device which has been previously paired to the Bluetooth® unit,
the link must be changed to this device.
● If an error occurs while trying to link a device, “Err” flashes in the audio dis-
play for three seconds, and the display returns to “LINK CHANGE”. If this
occurs, check the pairing status of the Bluetooth
® audio device and the
location of the device in the vehicle (not in the trunk or a me tal-type box),
and then try the link operation again.
● Device selection can also be done using voice recognition.
1
2
3
4

356
YARIS SEDAN_OM_OM99S50z_(U)
4-3. Bluetooth®
The available languages are English, Spanish, and Canadian French.
If the language setting is changed, all of the voice guidance and voice
input commands are done in the selected language.
Method 1
Press the pick-up button or talk button with a short press.
Say: [Beep] “Setup”
Prompt: “Select one of the follo wing: Pairing options, confirmation
prompts, language, passcode, select phone or select music playe r. ”
Say: [Beep] “Language”
Prompt: “Select a language: English, French, or Spanish.”
Say: [Beep] “French” (Speak the desired language: “English”,
“French” or “Spanish”)
Other language settings can also be made while in the current setting by
saying the name of the language in the native pronunciation.
Prompt: “French (Desired langu age) selected. Is this correct?”
Say: [Beep] “Yes”
Prompt: “French (Desired language) selected” (Spoken in the new ly
selected language).
Method 2
Press the pick-up button or talk button with a short press.
Say: [Beep] “French” (Say the desired language: “English”,
“French” or “Spanish”). (Change the desired language by saying the
language name.)
Other language settings can also be made while in the current setting by
saying the name of the language in the native pronunciation.
Prompt: “Would you like to change the language to French (Desir ed
language)?”
Say: [Beep] “Yes”
Prompt: “Please wait. Switching to French phonebook. French
selected” (Spoken in the newly selected language).
Available Language (Type A)
1
2
3
4
5
6
7
8
9
1
2
3
4
5

YARIS SEDAN_OM_OM99S50z_(U)
3574-3. Bluetooth®
4
Interior Features
●If the language setting is changed, device registration is main tained.
● Phonebook records are not cleared, but each language has a sepa rate
phonebook. Therefore, entries created in one language will need to be re-
entered in the phonebook of the new language.
● Do these steps before you start driving. These less used functions are too
distracting to undertake while driving until you are fully fami liar with the sys-
tem.
In this section, the basic opera tion of the voice recognition is
explained.
■Activating Voic e Recognition
To Activate the Main Menu: Press the pick-up button or talk but ton
with a short press.
■Ending Voice Recognition
Use one of the following methods: • Press and hold the talk-button.
• Press the hang-up button.
■Skipping Voice Guidance (for faster operation)
Press and release the talk-button.
■Tu t o r i a l
The tutorial explains how to use Bluetooth
® Hands-Free.
To activate the tutori al, do the following:
Press the pick-up button or talk button with a short press.
Say: [Beep] “Tutorial”
Follow the prompts to receive the appropriate voice guidance
instructions.
Voice Recognition (Type A)
1
2
3

358
YARIS SEDAN_OM_OM99S50z_(U)
4-3. Bluetooth®
■Commands useable anytime during voice recognition
“Help” or “Go Back” are comma nds which can be used at anytime
during voice recognition.
● Help function use
The help function informs the user of all the available voice com-
mands under the current conditions.
Say: [Beep] “Help”
Follow the prompts to receive the appropriate voice guidance
instructions.
● Returning to previous operation
This command is for returning to the previous operation while in
the voice recognition mode.
Say: [Beep] “Go Back”
■To prevent a deterioration in the voice recognition rate and
voice quality, the following points should be observed:
• The voice recognition cannot be performed while voice guidance
or the beep sound is operating. Wait until the voice guidance o r
the beep sound is finished bef ore saying your commands.
• Dialects or different wording other than hands-free prompts ca n-
not be recognized by voice recognition. Speak in the wording
specified by the voice commands.
• It is not necessary to face the microphone or approach it. Spe ak
the voice commands while maint aining a safe driving position.
• Do not speak too slow or too loud.
• Speak clearly, without pausi ng between words or numbers.
• Close the windows to reduce loud noises from outside the vehi- cle, or turn down the airflow of the air-conditioning system wh ile
Bluetooth
® Hands-Free is being used.
• Make sure the vents are not directing air up towards the micro -
phone.
If the voice recognition perf ormance is not satisfactory.
Refer to Voice Recognition Learning Function (Speaker Enrollmen t)
(Type A) on P. 361.
Refer to Troubleshooting on P. 415.
1
2

YARIS SEDAN_OM_OM99S50z_(U)
3594-3. Bluetooth®
4
Interior Features
■Skipping Voice Guidance (for faster operation)
● The Bluetooth® Hands-Free system is operable several seconds after the
ignition is switched to ACC or ON (requires less than 15 second s).
● When operating the audio unit or the A/C while using Bluetooth
® Hands-
Free, the beep sounds or voice guidance (audio unit)/cannot be heard.
If a passcode is set, the system cannot be activated unless the pass-
code is input.
Do this function only when parked. It is too distracting to att empt while driv-
ing and you may make too many errors to be effective.
■
Passcode setting
Press the pick-up button or talk button with a short press.
Say: [Beep] “Setup”
Prompt: “Select one of the follow ing: Pairing options, confirma-
tion prompts, language, passcode, select phone or select music
player.”
Say: [Beep] “Passcode”
Prompt: “Passcode is disabled. Would you like to enable it?”
Say: [Beep] “Yes”
Prompt: “Please say a 4-digit passcode. Remember this pass-
code. It will be required to use this system.”
Say: [Beep] “XXXX” (Say a desir ed 4-digit passcode, “PCode”.)
Prompt: “Passcode X XXX (Passcode, PCode). Is this correct?”
Say: [Beep] “Yes”
Prompt: “Passcode is enabled.”
■Using Bluetooth® Hands-Free with a passcode
Press the pick-up button or talk button with a short press.
Prompt: “Hands-Free system is locked. State the passcode to
continue.”
Say: [Beep] “XXXX” (Say the set passcode “PCode”.)
If the correct passcode is input, voice guidance “XXXXXX... (Ex .
“Mary’s device”) (Device ta g) is connected” is announced.
If the passcode is incorrect, voice guidance “XXXX (4-digit pas s-
code, Pcode) incorrect passc ode, please try again” is
announced.
Security Setting (Type A)
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4

360
YARIS SEDAN_OM_OM99S50z_(U)
4-3. Bluetooth®
■Canceling the passcode
Do this function only when parked. It is too distracting to attempt
while driving and you may make too many errors to be effective.
Press the pick-up button or talk button with a short press.
Say: [Beep] “Setup”
Prompt: “Select one of the follow ing: Pairing options, confirma-
tion prompts, language, passcode, select phone or select music
player.”
Say: [Beep] “Passcode”
Prompt: “Passcode is enabled. W ould you like to disable it?”
Say: [Beep] “Yes”
Prompt: “Passcode is disabled.”
■Confirmation Prompts
The confirmation prompt confirms the command content to the user
before advancing to the operation requested by the user. When t his
function is turned on, the syst em reads out the voice input com -
mand previously received and confirms whether the command is
correct before advancing to the command execution.
When the confirmation prompt function is turned on:
(Ex. “Calling John’s dev ice. Is this correct?”)
When the confirmation prompt function is turned off:
(Ex. “Calling Jo hn’s device.”)
Press the pick-up button or talk button with a short press.
Say: [Beep] “Setup”
Prompt: “Select one of the follow ing: Pairing options, confirma-
tion prompts, language, passcode, select phone or select music
player.”
Say: [Beep] “Confirmation prompts”
Prompt: “Confirmation prompts are on/off. Would you like to turn
confirmation prompts off/on?”
Say: [Beep] “Yes”
Prompt: “Confirmation prompts are off/on.”
■Confirmation Prompts
If the confirmation prompt function is turned off when making a n emergency
call, the system reads out and confirms the command before exec uting it.
1
2
3
4
5
6
7
1
2
3
4
5
6
7