VAUXHALL MOVANO_B 2014.5 Infotainment system

Navigation61
Name preferences
To display street and house numbers on the map.Use day/night colours
In the default automatic mode, the
system will automatically switch
between day and night modes.
If manual mode is preferred,
automatic mode can be deactivated
by selecting Use day colours or Use
night colours .
Automatic switching can be
reactivated using the Brightness
preferences menu.Change map colours
New colours can also be
downloaded. To select a downloaded colour, select an additional colour
scheme, then the colour required.Brightness preferences
Adjust the screen brightness to suit
the external lighting conditions.Set clock
When the clocks change in summer
or winter, or when travelling abroad,
the time on the system will need
adjusting. Select Set clock; thesystem offers three display modes.
Select the desired mode, then Done
using the soft button. Set the clock,
then select Done.
Clock synchronisation: The
synchronisation option allows the time to be set directly using GPS
information. Select the Sync option
with the left soft button ⌞.Start-up preferences
Used to change the system start-up
settings and also the start-up page by
customising it with a chosen photo.Show fewer menu options
Allows simplification of the menu to
facilitate better use. To reactivate all
options, select this icon again.Change language
To change language, select
Language: , the required language
can then be selected from the list.Reset factory settings
To reset all system parameters and delete all personal data.
Select Reset factory settings in the
main menu, then follow the on-screen instructions using the soft buttons.Partial reset: allows the deletion of allpersonal data (favourites, recent
destinations, etc.).
After resetting, the system will restart
in English.
Destination input
Select a destination
From the main menu, select Navigate
to... , then choose from the following
options:Home
Guides you to your home.
To store the address of your home
location, see Add and save a
favourite .Favourite
A stored list of frequently visited
destinations.
■ Select Favourite and confirm.
■ Select the required destination from
the list and confirm.
To store a destination in the
favourites list, see Add and save a
favourite .

62Navigation
Notice
The Favourite icon will be greyed out
if no destinations have been saved
as a Favourite.Address
Enter either all or part of the address (i.e. city and street or city centre, area
code etc.).
Notice
Only addresses known to the system through the digital map are
accepted.
■ When using for the first time, set the
destination country.
■ Enter the name of the desired city. The system may suggest several
cities (the first line is always
highlighted in yellow).
■ Select the desired city from the list of suggestions and select Done
using the soft button.
■ Proceed in the same way for Street: and House number: .
If the desired city does not appear in
the brief list of suggestions, a
complete list can also be accessed via the drop down arrow (in the top
right corner of the screen).
The system stores previously entered
cities in its memory. They can then be directly selected from the full list via
the drop down arrow.
Recent destination
Select a destination from the list of
addresses last used, which are
automatically stored.Point of Interest(POI)
A point of interest (POI) is a service,
establishment or tourist area close to
a location. POIs are classed in
different categories (e.g. restaurants,
museums, car parks, etc.).
Select Point of Interest and confirm,
then search for a POI from the
following options:Search by POI name
Enter the name of the POI and the
system will automatically search for
the point of interest.Search by POI category
Select the desired category type
(e.g. museum), then choose the area
required from the following options:
■ POI near you ,
■ POI in city
■ POI near Home
Select Done to start the search.Point on map
A destination from the map can be defined. Position the cursor on this
destination and confirm. The system
will calculate the route.

Navigation63
Latitude Longitude
Defines a destination using its latitude
and longitude values.
Confirm the destination Once the destination information hasbeen entered, the system calculates
the route. At the end of the
calculation, the system displays the navigation summary and suggeststwo options:
■ Details : Displays details of the
journey in various forms. Refer to
Route information in the Guidance
section.
■ Done : Guidance starts.
If not confirmed, this page will close
after a few seconds and guidance
starts automatically.
The IQ routes™ function can optimise the journey time using statistical data. To activate or deactivate this function,
see Route planning in the Usage
section.
Add and save a favourite
Select Add Favourite from the main
menu.The location for your Favourite can be
selected from the following options:Home
Save your home address as a
favourite.Favourite
Not used.Address
When entering an address, choose
from the following options:
■ City centre,
■ Street and house number,
■ Area code,
■ Crossing or junction.Recent destination
Select a favourite location from the list
of those recently entered as a
destination.Point of Interest
When adding a point of interest (POI) to your Favourites, choose from the
following options:
■ POI near you : Search from a list of
POIs near your current position.
■ POI in city : Choose a POI in a
particular town or city. The town/city
must be specified.
■ POI near Home : Search from a list
of POIs near your home location.
When navigating to a destination, a
selection can also be made from a list of POIs:
■ POI along route ,
■ POI near destination .My location
When stopped somewhere
interesting, it can be saved as a
Favourite. The system will always
suggest a name, usually the address,
but a name can be chosen. To enter
the name, just start typing.Point on map
Select the location of the Favourite
using the cursor, then select Done
using the soft button.

64Navigation
Latitude Longitude
Creates a Favourite by entering
latitude and longitude values.
Delete or rename a favourite Select Change preferences , then
select Manage favourites : select the
Favourite then Delete item or
Rename item using the soft button.
Prepare route in advance Journeys can be planned in advance,
e.g. to find out how long a journey is
expected to take, or to check the
route.
Select Prepare route from the main
menu. Choose a starting point in the same way as selecting the
destination, then select a destination. Choose the type of route and confirm.
The system plans the route and
allows details to be viewed.
Guidance Route information To view the route before guidance
begins, select View route after a
destination has been entered.Select the details of the route from the
following options:Browse as text
Shows the route plan. Several details of the route will appear:
■ direction change arrows,
■ road types,
■ road names,
■ distance before a junction.Browse as images
Shows changes in direction as
images.Browse map of route
Shows the map of the route.Show route demo
Shows a demonstration of the route.
The speed of the demonstration can
be selected.Show route summary
Shows details of the journey time, the
distance and the type of route. To
access this page directly from the
navigation map, press the right soft
button.Show traffic on route
Shows an overview of traffic incidents
affecting the journey.
Edit Itinerary To modify the route, select Find
alternative from the main menu. The
following options are available:Calculate alternative
Calculates an alternative to the route already planned. The system will look
for another route from your current
location to the destination.Avoid roadblock
Select this if there is a roadblock or a
line of traffic ahead which was not
indicated by the Traffic info service. How much of the route to be avoided
can be chosen: Avoid 100m, 500m,
2000m or 5000m.
The system will recalculate the route
avoiding the section of the route for
the selected distance.Recalculate original
Returns to the original route.

Navigation65
Avoid part of route
Avoids a specific part of the route,
such as a road or a junction. Choose
the road to be avoided from the list of roads on the route.Minimise traffic delays
Select this menu to plan the route
based on the latest traffic information.Travel via...
Select this to change the route so that
it passes a particular location, e.g. to pick someone up. The location is
chosen in the same way the
destination is chosen, so all the same options can be selected: Address,
Favourite , Point of Interest and Point
on map .
The system will calculate a new route to the destination that passes the
chosen location.
Deactivating guidance
To stop guidance when in progress,
select Clear route (or Cancel route ) in
the main menu and confirm. To resume guidance, select Navigate
to... , then Recent destination .
Browse map
Select Browse map from the main
menu or use one of the direction
buttons on the control. The right soft
button zooms using the up and down
keys. To access the options, press
the OK button, then the right soft
button.Options
Access the option from the map
browser. This menu allows the
selection of information that will be
shown on the browser. To change the display preferences for points of
interest (POI), press the left soft
button. To confirm the selection, press the right soft button.Find
The map can be centred on a specific
location; press the left soft button and this menu can centre:
■ your home,
■ a favourite,
■ an address,
■ a recent destination,■ a point of interest,
■ your current location.Cursor position:
To access the Cursor position: from
the map browser, press the OK
button. Use this menu to:
■ centre the map on the vehicle location,
■ navigate to a point on the map, ■ search for a point on the map,
■ add a point on the map to the favourites,
■ add a point on the map to the POI,
■ correct the location of the vehicle.
Help me!
Use Help me! to find and contact
assistance. The following options can
be selected:
Emergency phone numbers
The Emergency phone numbers
menu gives different service centres:
■ Nearest police station ,
■ Nearest doctor ,
■ Nearest hospital ,

66Navigation
■Nearest public transport ,
■ Nearest car repair services ,
■ Nearest dentist ,
■ Nearest pharmacy ,
■ Nearest vet .
When a service centre is selected, the
location and phone number are
displayed. Select the service centre
as a destination by pressing the soft
button.Drive to help
Use the system to navigate by road
to:
■ Nearest car repair services ,
■ Nearest hospital ,
■ Nearest doctor ,
■ Nearest police station ,
■ Nearest pharmacy ,
■ Nearest dentist .Where am I?
The system shows your current
location (address) and gives the GPS coordinates (latitude/longitude).TomTom Safety Cameras
The system can provide alerts of safety or speed cameras on route.
For options select TomTom Safety
Cameras in the main menu:
Report safety camera
If the system does not indicate a
camera that is on the journey, its
details can be entered manually by
selecting Report safety camera .
The type of camera has to be entered (fixed or mobile). The system opens a
map page and using the directional
controls, place the red marker on the
location of the camera and confirm
using the soft buttons.
Confirm the type of camera, and if
Speed camera is chosen, the speed
limit must also be entered and
confirmed.
For the system to integrate cameras
entered manually by other users, you must be subscribed to the camera
updates in TomTom HOME . The
camera alert will only become active
after the location is confirmed by the
TomTom technical department.The quick menu can also be used to
report a camera. Select Report safety
camera . The system requires the type
of camera to be entered, then which
side of the road it is on. Confirm with
the right soft button.
Change warning preferences
Use to delete or modify the warning
time before the camera and the sound of the warning.
To add camera alerts (mobile
camera, toll road camera etc.), check the types of camera required. Select
the type of camera to modify, then to
delete the warning, use the soft
buttons to confirm yes or no. If No is
chosen, enter the warning time before
the camera and Done using the soft
button.
Select the desired sound to warn of
an upcoming camera. Test the sound using the left soft button and confirm
with the right soft button.

Navigation67
Disable alerts
The camera warnings can be
enabled/disabled. Select Disable
alerts in the main menu if the
warnings are enabled or Enable
alerts if the warnings are disabled.
Notice
In certain countries it is illegal to
download and activate the camera
warning option and this could lead to
prosecution.
Traffic info
Allows up-to-date traffic information
from local sources to be received. Traffic information can include:
■ accidents and incidents,
■ traffic volumes,
■ roadworks,
■ weather conditions,
■ lane closures.
The Traffic info service is not
available in all countries and regions.
Traffic incidents are notified by verbal messages and by symbols on the
map - refer to the Symbols overview
section.To show the status of the Traffic info
service, the following icons are
displayed on the traffic sidebar:A=The device is searching for an
FM station broadcasting traffic
information.$=Traffic information is up-to-date
or being updated.%=Information not updated for at
least 9 minutes.^=Information not updated for at
least 14 minutes.&=Information not updated for at
least 19 minutes.*=Information not updated for at
least 24 minutes.
To manage the Traffic info service,
select Traffic info (or HD Traffic ) from
the main menu and select from the
following options:
Minimise traffic delays
Select this menu to plan the route
based on the latest traffic information.Show traffic on route
Select this menu to see an overview
of all traffic incidents on the route. Use the soft buttons on the resulting
screen to see more detailed
information about each incident.Browse map
This menu enables the map to be
explored and to keep up-to-date with
the traffic situation in the area. The
map displays the last location shown.
For information relating to the
incidents shown on the map, select
the incident using the right and left
buttons, then confirm.
To access an area you are searching
for more quickly, add it to your
favourites.Change Traffic info preferences
The following can be changed:
■ Automatically minimise delays after
every traffic update.
■ Beep to notify when traffic situation
on route changes.Read aloud traffic info
Select this menu for traffic incidents to
be read aloud on the route.

68NavigationSymbols overviewL=AccidentM=Traffic jamG=One or more lanes closedF=Road closedN=Traffic incidentE=Road worksJ=Heavy rainC=SnowB=Strong wind, stormK=FogI=Ice

Voice recognition69Voice recognitionGeneral information.....................69
Phone control ............................... 69General information
The voice recognition function of the handsfree phone system allows you
to operate certain functions of the
mobile phone via voice input.
Voice tags can be created for the
contacts in the vehicle phonebook
enabling you to call a contact without
manually selecting the caller name or number.
To ensure that conversations held
inside the vehicle do not start
unintentional calls to a saved contact,
the voice recognition function must
first be activated via the steering
column controls.
In the event of incorrect operation, the voice recognition function requests
you to repeat the desired command,
or plays back the available options.Phone control
Creating voice tags In addition to names and numbers,
voice tags can be created when new
contacts are added to the vehicle
phonebook. Refer to Operation in the
Phone section 3 79.
Voice tags can also be added or
modified afterwards by selecting the following menus and options:
■ Directory Management ,
■ Vehicle phonebook ,
■ Modify this contact .
Select the contact to be modified from
the list of contacts, then select the following menu options by turning and pressing the rotary knob:
■ (voice tag) ,
■ Launch voice tag recording ,
When prompted to record a voice tag,
speak after the tone. A message asks
for the voice tag to be repeated. If the system does not recognise the
repeated voice tag, it will request it to

70Voice recognition
be repeated again. A message
confirms that the voice tag has been recorded successfully.
Upon completion, ensure the voice
tag is stored along with other contact
details by selecting Memorise.
Activating voice recognition To activate the voice recognition
function:
■ Press button 5 or
■ Press button w (on the steering
column controls)
After the tone, repeat the voice tag
previously recorded for the desired
contact to start the dialling process.
Say the voice tag directly, i.e. do not
say 'Call' before the voice tag.
If the system does not recognise the
voice tag, a message asks you to
repeat it. If the voice tag is still not
recognised, the list of recorded voice
tags is played back. Repeat the
desired voice tag when it is played
back, to start the dialling process.In the event the system still does not
recognise the voice tag, the voice
recognition function is automatically
deactivated.