VAUXHALL MOVANO_B 2014.5 Infotainment system
Manufacturer: VAUXHALL, Model Year: 2014.5, Model line: MOVANO_B, Model: VAUXHALL MOVANO_B 2014.5Pages: 93, PDF Size: 1.45 MB
Page 21 of 93
Introduction21
Automatic switch-off
With the ignition off, if the
Infotainment system is switched on
with the X knob, it will switch-off
automatically a short period after the
last user input. Depending on type
fitted, this may occur after approx.
5 minutes.
R16 BT / CD16 BT / CD18 BT:
20 minutes. Pressing the X knob
again will allow the Infotainment
system to remain on for a further 20 minutes.
Setting the volume
Turn the X rotary knob, or press
button < or ].
CD35 BT: Turn volume rotary knob.
Alternatively (with the steering
column controls), press button ! or
# .
Stored volume
When the Infotainment system is
switched off, the current volume is
stored.CD30 BT: If the volume was greater
than 15 when the system was
switched off, it will automatically be
reduced to 15 when switched on
again.
Speed dependent volume
When speed dependent volume
( 3 27) is activated, the volume is
adapted automatically to compensate
for road and wind noise.
Mute
To mute the current audio source,
press X knob briefly 1)
.
CD35 BT: Press volume rotary knob
briefly.
R16 BT / CD16 BT / CD18 BT : Press
volume rotary knob briefly.
Alternatively (with the steering
column controls), press the @ or 8
button or press ! and #
simultaneously.
Unmute
To unmute, briefly press (or turn) the
X knob again.CD35 BT: Press volume rotary knob
again.
Alternatively (with the steering
column controls): Press @ again or
press ! and # simultaneously again.
Display screen operation R15 BT / CD15 BT / R16 BT /
CD16 BT / CD18 BT
■ To move up/down in the display: Turn the OK rotary knob.
■ To confirm actions: Press the OK
rotary knob.
■ To cancel actions (and return to previous menu): Press the /
button.
CD30 BT ■ To move up/down in the display: Turn the rotary knob.
■ To move left/right in the display: Press button ⊲ or ⊳.
■ To confirm actions (and to move right only in the display):
Press the rotary knob.1) Not with R16 BT, CD16 BT, CD18 BT and CD30.
Page 22 of 93
22Introduction
CD35 BT■ To move up/down in the display: Turn the central rotary knob.
■ To confirm actions: Press the central rotary knob.
■ To cancel actions (and return to previous menu): Press the /
button.
System settings
R15 BT / CD15 BT / R16 BT /
CD16 BT / CD18 BT - System settings
Press the SETUP button and access
the settings menu by turning and
pressing the OK rotary knob.
When system setting adjustments
have been made, press SETUP to
exit the menu and save changes. The system also saves and exits
automatically after a delay.
Change system language
Change the display language by
accessing the Language menu.
Select a language from the list by
turning and pressing the OK knob.Restore default system settings
To restore system settings to their
default values, select Default
settings by turning and pressing the
OK knob. Confirm modification when
prompted by pressing the OK knob
again.
CD30 BT - System settings
Press the 0 button and select the
System settings menu.
When system setting adjustments
have been made, press 0 to exit the
menu and save changes. The system
also saves and exits automatically
after a delay.
Set the clock
To set the time, access the Clock
menu. Press button ⊲ or ⊳ to select
the time menu items, then turn the
rotary knob to adjust the time. Press
button ⊲ or ⊳ to select the minutes,
then turn rotary knob to adjust the
time.Change system language
Change the text and voice recognition
language by accessing the
Language menu. Select a language
from the list. The voice recognition and phone functions are not available when the language is being changed.
Restore default system settings
To restore system settings to their
default values, select Default
settings by turning and pressing the
rotary knob. Confirm modification with
the display option when prompted.
CD35 BT - System settings
Press the SETUP / TEXT button to
access the settings menu.
When system setting adjustments
have been made, press
SETUP / TEXT to exit the menu and
save changes. The system also
saves and exits automatically after a
delay.
Page 23 of 93
Introduction23
Set the clock
To set the time, access the Clock
menu. Turn the central rotary knob to adjust the Hours setting, then press
the knob to confirm. Turn the knob to
adjust the Minutes setting and press
to confirm.
Change system language
Change the display language by accessing the Language menu. Turn
the central rotary knob to select one
of the 9 languages from the list, then
press the knob to confirm.
Restore default system settings
To restore system settings to their
default values, select Default
settings by turning and pressing the
central rotary knob. Confirm
modification when prompted by
pressing the knob again.
Modes of operation Radio
To change the audio source to radio:
Press the RADIO, RADIO/CD or
AUDIO/SOURCE button.Detailed description of the radio
functions 3 28.
Audio players
To change the audio source to CD,
USB , AUX , Bluetooth or iPod (where
applicable): Press the MEDIA,
RADIO/CD or AUDIO/SOURCE
button.R15 BT / R16 BT
Detailed descriptions of:
■ AUX input functions 3 41
■ USB port functions 3 43
■ Bluetooth music operation 3 46CD15 BT / CD 16 BT / CD18 BT
Detailed descriptions of:
■ CD player functions 3 37
■ AUX input functions 3 41
■ USB port functions 3 43
■ Bluetooth music operation 3 46CD30 BT
Detailed descriptions of:
■ CD player functions 3 37
■ AUX input functions 3 41■ USB port functions 3 43
■ Bluetooth music operation 3 46CD35 BT
Detailed descriptions of:
■ CD player functions 3 37
■ AUX input functions 3 41
■ USB port functions 3 43
■ Bluetooth music operation 3 46
Navigation system
CD30 BT, CD35 BT
Detailed description of the Navigation system 3 52.
Phone
R15 BT / CD15 BT / R16 BT /
CD16 BT / CD18 BT - Phone
To access the Phone menu: Press
the 6 or TEL button.
To access the phone settings menu: Press the TEL button and select
Phone settings .CD30 BT - Phone
To access the Phone menu: Press
the 6 or TEL button.
Page 24 of 93
24Introduction
To access the phone settings menu:Press the 0 button and select Phone
settings .CD35 BT - Phone
To access the Phone menu: Press
the 6 or TEL button.
To access the phone settings menu:
Press the SETUP / TEXT button and
select Phone settings .
Use the display options in these
menus to connect mobile phones,
make telephone calls, create contacts lists and adjust various settings.
Detailed description of the handsfree phone system functions 3 71.
Tone settings
R15 BT / CD15 BT - Tone
settings In the audio settings menu, the tonecharacteristics can be set.
Press the SETUP button to access
the settings menu.
Select Audio settings and turn the
OK rotary knob until the desired
setting is selected from:
■ BASS (bass)
■ TREBLE (treble)
■ FADER (front/rear balance)
■ BALANCE (left/right balance)
The display indicates the type of
setting followed by the adjustment
value.
Set the desired value by turning the
OK rotary knob and press the knob to
confirm selections.
To exit the audio settings menu, press
the / button.
Notice
If there is no activity, the system will
exit the audio settings menu
automatically.
Setting bass and treble
Select Bass or Treble .
Set the desired value by turning the OK rotary knob and press the knob to
confirm setting.Setting the volume distribution
between right - left
Select Balance .
Set the desired value by turning the
OK rotary knob and press the knob to
confirm setting.
Setting the volume distribution
between front - rear
Select Fader.
Set the desired value by turning the
OK rotary knob and press the knob to
confirm setting.
CD30 BT - Tone settings In the audio settings menu, the tone
characteristics can be set.
To move around the menu and select
the various headings, turn the rotary
knob to move up/down and press
button ⊲ or ⊳ to move left/right.
Alternatively, press the rotary knob to move right only.
Press the 0 button to access the
settings menu.
Select Audio settings and use ⊲ or ⊳
and/or the rotary knob until the
desired setting is selected.
Page 25 of 93
Introduction25
The display indicates the type of
setting followed by the adjustment
value.
A value of 0 means the function is
deactivated.
To exit the settings menu, press 0.
Notice
If there is no activity, the system will
exit the audio settings menu
automatically.
Optimising the tone for the style of
music
Select the Musical atmosphere menu.
Turn the rotary knob to select from: ■ Voice
■ Classical
■ Jazz
■ Neutral
■ Pop
■ Rock
The displayed options offer optimised
bass, middle and treble settings for
the relevant style of music.
Set the style of music by pressing the
rotary knob.Setting bass and treble
Select the Musical atmosphere menu.
Turn the rotary knob to select Bass/
treble .
Press ⊲ or ⊳ to access Bass or Treble .
Set the desired value for the selected option by turning the rotary knob.
Optimising the sound distribution
Select the Sound optimisation menu.
To optimise the sound distribution for
the entire vehicle or just the driver,
turn the rotary knob to select from:
Vehicle or Driver .
Set by pressing the rotary knob.
Setting the volume distribution
between right - left
Select the Sound optimisation or
Balance/fader menu.
Turn the rotary knob to select
Balance .
Press rotary knob or button ⊲ or ⊳ to
display current setting and turn rotary knob to adjust.
Press rotary knob to set the desired
value and display the Fader setting.Setting the volume distribution
between front - rear
The Fader setting is displayed after
Balance has been set.
Turn the rotary knob to adjust the fader between front/rear.
Moderate volume in the front
To suppress the volume in the rear and moderate only the volume in the
front of the vehicle:
Select the Sound optimisation menu.
Turn the rotary knob to select Rear
OFF and press rotary knob to set.
Setting Loudness
Select the Other audio settings menu.
Select Loudness by pressing the
rotary knob.
CD35 BT - Tone settings
In the audio settings menu, the tone characteristics can be set.
Press the SETUP / TEXT button to
access the settings menu.
Select Audio settings and turn the
central rotary knob until the desired
setting is selected.
Page 26 of 93
26Introduction
The display indicates the type of
setting followed by the adjustment
value.
A value of 0 means the function is
deactivated.
To exit the settings menu, press
SETUP / TEXT (or /).
Notice
If there is no activity, the system will
exit the audio settings menu
automatically.
Optimising the tone for the style of
music
Select the Musical atmosphere menu.
Turn the rotary knob to select from: ■ Pop / Rock
■ Classical
■ Jazz
■ Neutral
The displayed options offer optimised
bass, middle and treble settings for
the relevant style of music.
Set the style of music by pressing the
central rotary knob.Setting bass and treble
Select the Musical atmosphere menu.
Turn the central rotary knob to select Bass/treble and press knob to
confirm.
Turn the central rotary knob to access
Bass or Treble and press knob to
confirm.
Set the desired value for the selected option by turning the central rotary
knob and press knob to confirm.
Optimising the sound distribution
Select the Sound optimisation menu.
To optimise the sound distribution for
the entire vehicle or just the driver,
turn the central rotary knob to select
from: Vehicle or Driver .
Set by pressing the knob.
Setting the volume distribution
between right - left
Select the Sound optimisation menu.
Turn the central rotary knob to select
Balance/fader . Press knob to display
current setting for Balance and turn
knob to adjust.Press knob to set the desired value
and display the Fader setting.
Setting the volume distribution
between front - rear
The Fader setting is displayed after
Balance has been set.
Turn the central rotary knob to adjust the fader between front/rear.
Moderate volume in the front
To suppress the volume in the rear
and moderate only the volume in the
front of the vehicle:
Select the Sound optimisation menu.
Turn the central rotary knob to select
Rear OFF and press knob to set.
Automatic Gain Control (AGC)
To switch on Iow volume sound
enhancement:
Select the AGC Activated menu and
press the central rotary knob to
activate.
Restore default audio settings
Select Default settings and press the
central rotary knob to confirm.
Page 27 of 93
Introduction27
All the audio settings return to their
default values.
Display software version
To display the software version,
access the Software version menu
and press the central rotary knob.
Volume settingsSpeed dependent volume
When this feature is activated, the
volume is adapted automatically to
compensate for road and wind noise
during driving.
CD30 BT - Volume settings
When this feature is activated, the
volume is adapted automatically to
compensate for road and wind noise
during driving.
Press the 0 button to access the
Audio settings menu.
Select Other audio settings then
Adaptation volume km/h .
Turn the rotary knob to set the degree of volume adaptation.A value of 0 means the function is
deactivated.
CD35 BT - Volume settings
When this feature is activated, the
volume is adapted automatically to
compensate for road and wind noise
during driving.
Press the SETUP / TEXT button to
access the settings menu. Select
Audio settings followed by Adaptation
volume km/h by turning the central
rotary knob and pressing to confirm
the selection.
Turn the knob to set the degree of
volume adaptation.
A value of 0 means the function is
deactivated.
Page 28 of 93
28RadioRadioUsage.......................................... 28
Station search .............................. 29
Autostore lists .............................. 32
Radio data system (RDS) ............33Usage
Radio reception
Radio reception may be disrupted by static, noise, distortion or loss of
reception due to:
■ changes in distance from the transmitter,
■ multi-path reception due to reflection,
■ shadowing.
Control buttons - R15 BT / CD15 BT / R16 BT / CD16 BT /
CD18 BT
The most important buttons for
control of the radio are:
■ RADIO : Activate radio, change
waveband
■ 2 3 : Station search
■ OK rotary knob: Change frequency
■ Station buttons 1...6: Preset station
buttons■ SETUP : System settings,
automatic station storing
■ TEXT : Display radio text
information
Activating the radio
Press the RADIO button to switch the
audio source to radio.
The station previously selected will be
received.
Selecting the waveband
Press the RADIO button repeatedly to
switch between the available
wavebands (e.g. FM1, FM2, AM).
The station previously selected in that waveband will be received.
Control buttons - CD30 BT
The most important buttons for
control of the radio are:
■ RADIO/CD : Activate radio
■ Central rotary knob: Change waveband and frequency
■ ⊲ ⊳: Change search mode (frequency, station name, stored
station number)
Page 29 of 93
Radio29
■2 3 : Station search
■ MEM : Access stored radio station
list
■ Station buttons 1...6: Preset station
buttons
■ 0 : System settings
Activating the radio
Press the RADIO/CD button to switch
the audio source to radio.
The station previously selected will be
received.
Selecting the waveband
Press button ⊲ or ⊳ to highlight the
waveband in the display menu then
turn the rotary knob to select the
desired waveband.
The station previously selected in that waveband will be received.Control buttons - CD35 BT
The most important buttons for
control of the radio are:
■ RADIO : Activate radio, change
waveband
■ 2 3 : Change frequency, station
search
■ Central rotary knob: Access stored radio station list
■ Station buttons 1...6: Preset station
buttons
■ SETUP / TEXT : System settings
Activating the radio
Press the RADIO button to switch the
audio source to radio.
The station previously selected will be
received.
Selecting the waveband
Press the RADIO button repeatedly to
switch between the available
wavebands (e.g. FM1, FM2, MW,
LW).
The station previously selected in that waveband will be received.Station search
Automatic station search
R15 BT / CD15 BT / R16 BT /
CD16 BT / CD18 BT - Automatic
station search
Briefly press button 2 or 3 to
search for the next receivable station
in the current waveband.
If no station is found, automatic
searching continues until 2 or 3 is
pressed again.
CD30 BT - Automatic station search
Highlight the frequency in the display
using button ⊲ or ⊳.
Press button 2 or 3 to search for
the next receivable station in the
current waveband.
CD35 BT - Automatic station search
Press button 2 or 3 for approx.
2 seconds to search for the next
receivable station in the current
waveband.
Page 30 of 93
30Radio
If no station is found, automatic
searching continues until 2 or 3 is
pressed again.
Manual station search Stored station search
This allows you to recall radio stations that you have previously stored.
To store a station, select the desired
waveband and station then press
station button 1...6 until an audible
signal sounds, confirming that the
station has been stored to the
appropriate station button. 6 stations
per waveband can be stored.
Recalling a stored station
To recall a station, select the desired
waveband then briefly press station
button 1...6.
R15 BT / CD15 BT / R16 BT /
CD16 BT / CD18 BT - Manual station
search
Select the desired waveband then press and hold button 2 or 3 to
scan the selected waveband.Release the button when close to the
required frequency. An automatic
search is then made for the next
receivable station and it is played
automatically.
Turn the OK rotary knob to change
the frequency in increments.
Stored station search
This allows you to recall radio stations that you have previously stored.
To store a station, select the desired
waveband and station then press
station button 1...6 until an audible
signal sounds, confirming that the
station has been stored to the
appropriate station button. 6 stations
per waveband can be stored.
Recalling a stored station
To recall a station, select the desired
waveband then briefly press station
button 1...6.
Stored station search
This allows you to recall radio stations that you have previously stored.
You can store up to 12 FM, 6 LW or
6 MW stations in this way.Alternatively, press and hold station
button 1...6 until an audible signal
sounds, confirming that the station
has been stored to the appropriate
station button. 6 stations per
waveband can be stored in this way.
Search radio station name (FM only)
Select the FM waveband then
highlight the station name in the
display using button _ or 6.
Press button 1 or 4 repeatedly to
manually search for the required
station name. The frequency may be displayed instead if the station name
is unavailable.
The alphabetical list contains up to
60 FM radio stations with the best
reception. This list can be updated at
any time 3 32.
CD30 BT - Manual station search
Select the desired waveband then
highlight the frequency in the display
using button ⊲ or ⊳.
Turn rotary knob or press and hold
button 2 or 3 to scan the
frequencies in the current waveband.