AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owner's Manual

AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owner's Manual A3 1995 8L / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/950/w960_950-0.png AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owner's Manual

Page 21 of 38

AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owners Manual 13-19
      
Installing  
      Installation is the reverse of removal, noting the 
following:  
     
-  Install V-belt and loosely bolt both halves of belt 
pulley to coolant pump. 
     
-  Slowly

Page 22 of 38

AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owners Manual 13-20
      
Bearing for viscous fan in mounting 
bracket, removing and installing
 
     
Lock carrier in service position   Page 13
-1 
     
Special tools and equipment  
     
Hex nut from 3301 as

Page 23 of 38

AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owners Manual 13-21
 
    
Installing  
Installation is the reverse of removal, noting the following:  -  Pull bearing from bracket using hex nut from 3301 assembly tool, bolt 
from 3367 press out tool for viscous

Page 24 of 38

AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owners Manual 13-22
      
Mounting bracket for generator, power 
steering pump and viscous fan, 
removing and installing
 
     
Lock carrier in service position   Page 13
-1 
     
Removing  
     
CAUTION!

Page 25 of 38

AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owners Manual 13-23
      
-  Follow procedures for "Coolant pump, removing 
and installing"   Page 19
-13
 . 
     
Note:  
     Coolant pump is bolted to mounting bracket for 
generator, power steering pump and v

Page 26 of 38

AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owners Manual 13-24
 
  
Toothed belt, overview
 
CAUTION! 
Before removing toothed belt, note direction of 
rotation with chalk or felt-tip marker. Reversing 
the direction of rotation of a used belt can 
destroy

Page 27 of 38

AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owners Manual 13-25
 
  
6 - 
Toothed belt 
Before removing, note direction of rotation 
using chalk or felt-tip marker Check for wearRemoving  Page 13
-29
Installing (adjusting valve timing)   Page 13
-32
 
7 - 
B

Page 28 of 38

AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owners Manual 13 - 
Tensioner 
Pa
ge 28 of 38 En
gine, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.1

Page 29 of 38

AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owners Manual 13-26
 
  
14 - 
Connecting bolt 
25 Nm (18 ft lb)For tensioner
15 - 
Rear toothed belt cover 
16 - 
Bolt 20 Nm (15 ft lb)
17 - 
Intermediate shaft gear 
18 - 
Washer 
19 - 
Toothed belt gear for cran

Page 30 of 38

AUDI A3 1995 8L / 1.G AEB ATW Engines Engine Assembly Owners Manual 13-27
 
  
21 - 
Bolt 
65 Nm (48 ft lb)Use 3036 retainer when loosening or 
tightening 
22 - 
Toothed belt tensioner 
23 - 
Bolt 10 Nm (7 ft lb)
24 - 
Idler pulley 
25 - 
Bolt 25 Nm (18 ft lb)
26 - 
L
Page:   < prev 1-10 11-20 21-30 31-40 next >