warning AUDI Q5 2013 Owners Manual

Caring for vehicles with matte finish
paint
Appl ies to vehicles: with matte finish pa in t
Vehicles with matte finish paint require spe­
cial care due to the characteristics of the
paint.
Washing b y hand
To avo id damag ing the pa int when wash ing,
first remove dust and large particles from
your veh icle. Insects, g rease spots and finge r­
p rints a re best removed with a
s pecial cleaner
for matt e fini sh paint .
Apply the product using a microfiber cloth . To
avoid damaging the paint su rface, do not use
too muc h press ure.
R inse the vehicle thoroughly w ith water . Clean
the vehicle starting at the top and working to­
ward the bottom using a
neu tral shampoo
and a soft mi cro fiber cloth . Stop freque ntly to
rinse the clot h thorough ly.
Clean the wheels and sill panels last . Use a
clea n
sp o nge on these areas.
Rinse the vehicle thoroughly aga in and let it
air dry. If there are any water spots, they can
be removed us ing a
l e ath er cloth .
Clean again with the special cleaner for matte
finish paint
i f necessary.
Rem oving stubb orn dirt
B ird d ropping s or tree sap
are best removed
with p lenty of water and a m icrof iber cloth.
You sho uld r inse off
ga soline r esidue immedi­
ately with plenty of water.
A WARNING
- Wash your vehicle only when the ignition
is switched off to reduce the risk of a
crash.
- Always read and heed all WARNINGS and
other information
¢ page 216.
(D Note
-Do no t treat vehicle parts painted w ith
matte finish paint using polish ing mate -
Cleaning and protec tion 219
ria ls or hard wax. These p rod ucts could
cause damage to the appearance or sur­
face that cannot be repaired .
- Never use protective wax. It can destroy
the matte finish effect.
- Do not place any s tickers or magnetic
signs on vehicle pa rts painted with
matte finish paint. The paint could be
damaged when the stickers or magnets
are removed.
- To prevent paint damage, do not wash
the vehicle i n direct sunlight .
- To prevent damage to the paint surface,
do not use insect remova l sponges,
rough kitchen sponges or sim ilar items.
- Yo u should
remove debris (such as in­
sects) from t he headlight lenses on a
regu lar bas is, for example when refuel­
ing your veh icle. Only clea n the head­
lights us ing a wet cloth or sponge,
neve r
a dry one. Cleaning with soapy wate r is
recommended.
(D Tips
Fo r more informat ion on special clean ing
products desig ned fo r matte f inish paint,
see your Aud i dea le r.
Sensors and camera lenses
- Remove snow w ith a hand br ush an d remove
ice with a de -icing spray that does not con­
tain so lvents.
- Clean the senso rs (adap tive c ruise control *,
parking system *) with a cleaning so lution
that does not contain so lvents and a soft
cloth.
- Dampen the camera lens with a household
alcoho l-based g lass cleaner, and then wipe
the lens clean w ith a dry cloth.
Q) Note
- If you wash your vehicle with a press ure
washer,
- make sure there is eno ugh distance to
sensors in th e re ar bumper.
•
•

220 Cleaning and protec tio n
- do not clean the camera lenses and the
area around them with the pressure
washer.
- Never use warm or hot water to remove
snow or ice from the camera lens. T his
could cause the lens to crack.
- Never clean the camera lens with abra­
sive prod ucts .
Waxing and Polishing
Wa xing
A good wax coating protects the vehicle paint
to a large extent against the environmental
factors listed under
qpage 216, Washing and
even against slight scratches .
You can use a liquid car wax to protect your pa int as soon as one week after your veh icle
has been delivered.
Even if you regularly use a
w axi ng process in
automatic car washes, we recommend that
you manua lly app ly a coat of wax to give the
pa int extra protection, particularly if water no
longer beads on the clean paint .
Protect p lastic body parts with car wax in the
same way as the vehicle body.
During wa rm weather dead insects tend to
collect on the front bumper and on the for­
ward area of the hood . They are much easier
to remove from paint that is waxed
often.
P oli shing
Polish your vehicle on ly if the paint has lost its
shine and the g loss cannot be brought back
with wax .
I f the polish used does not contain preserva ­
tive compounds, the paint must be waxed af­
terwards .
_&. WARNING
Always read and heed a ll WARNINGS and
other information
9 page 216.
@ Note
Donotusecarwaxon -
matte o r anodized meta l trim
- rubber or rubber- like t rim.
Trim strips
Metal trim needs special care.
For environmental reasons, Audi fabricates
the bright trim strips and trim p ieces from
pure chromium-free aluminum .
Dirt and marks on the trim strips should be
removed with a
pH-b alan ced cleaning agent
(do not use a chrome cleaner) . Authorized
Audi dealers carry cleaning products which have been tested for use on you r vehicle and
are not ha rmfu l to the environment.
To avoid corrosion on the exter ior trim strips ,
only a pH-ba lanced solution shou ld be used
for the windsh ield washer.
_&. WARNING
A lways read and heed all WARNINGS and
other information
q page 216.
Plastic and vinyl
Plastic needs special care.
Use a clean, damp cloth or sponge to remove
dust and light surface dirt . For othe r soil, use
a lukewa rm all-pu rpose cleaning solution or a
mild saddle soap for v inyl tr im . Remove wate r
spots and traces of soap wi th a clean, damp
cloth or sponge. Use a clean, soft cloth to rub
dry.
G rease , tar or oil sta ins can be removed with a
cle an cloth or sponge soaked wi th a ll-purpose
cleaner or with a solvent designed especia lly
to clean vinyl.
O ccas ional ly app ly a colorless v inyl or leather
preservative to re tain the materia l's luster
and pliability.
_&. WARNING
A lways read and heed all WAR NINGS and
other information
q page 216.

Aluminum trim
Use only neutral -pH products to remove spots
and depos its from alum in um s urfaces.
Chrome care products and alkaline cleaners
will attack aluminum surfaces and can dam­
age them over time.
A WARNING
Always read and heed all WARNINGS and other information ¢
page 216.
Touch-up paint
Minor paint damages should be touched up
immediately.
"" Use either a touch-up pa int stick or spray
paint to cover minor scratches and nicks.
Your author ized A udi dealer has touch-up
pa int for minor sc ra tches and stone ch ips.
Scratches shou ld be touched up soon after
they occur to prevent corrosion .
If a spot starts to rust, howeve r, a simple
t ouch- up job w ill not be enough. The affected
sur face must be sanded smooth and coated
with an anti-r ust primer before the painted
finish can be restored.
The number for the origina l vehicle paint can
be found on the vehicle identi ficat ion labe l
¢page 290.
A WARNING
Always read and heed a ll WARNINGS and
other information
¢ page 216.
Windows
Clear vision to all sides .
Clea n all windows regularly to remove road
fi lm and ca r wash wax b uild up.
"" Remove snow from windows using a brush .
"" Use a plast ic ice scraper to remove ice from
windows and mirro rs.
"" Remove other res idue on the windows with
a sp ray -on glass cleaner.
Cleaning and protec tion
"" Wipe the windows dry with a clean piece of
cloth or kitchen paper towe l.
T he best way to remove snow from windows
and mirrors is to use a brush . Use a non-abra ­
sive
plastic ice scrape r -better sti ll, a spray
deicer - to remove
ice from windows and mir­
rors.
T he windows must not be cleaned with insect
remover or wax since these can interfere with
the function of the windshie ld w iper blades
(chatter) .
Oil, grease, o r si licone residue can be removed
with
gla ss cleane r or silicone remove r. How­
ever, wax residue requires the use of a specia l­
ly formulated so lvent. Please contact your au­
thori zed Audi dealer for advice on safe prod­
ucts for wax removal.
Windows should also be cleaned on the inside
at regu lar intervals .
Never dry windows wit h the same chamo is
that you use to dry painted surfaces . Wax resi­
due o n the chamois can impair vision through
the windows .
A WARNING
-Always read and heed all WARNINGS and
other information ¢
page 216.
-The windsh ield must not be treated with
water-repellent materials. They can in­
crease glare under poor v is ibility condi­
tions such as wetness, darkness, or when the sun is low on the hor izon. In addi­
tion, they can ca use the w indshie ld w ip­
ers to ch atter.
@ Note
- Never use warm o r hot wate r to remove
snow and ice from w indows and mirro rs.
T his could cause the glass to crack.
- T o prevent damage to the wires of the
rear defogger, do not place any adhesive
st ic kers on the ins ide of the rear w indow
over the wires.
221
•
•

222 Cleaning and protec tio n
-To h elp prevent dirt fr om scratch ing the
win dow, always scrape in a f orward di­
rection -pu shing the scraper away from
you -never back and fo rth.
- Water leaking from the inside of the rear
windows may damage sensitive electrical
components located either under the
rear parcel shelf or in the rear trunk area.
Always ensure that water
never leaks
through the body sect ion of the vehicle.
You can do this by using waterp roof pro­
tection
over the vehi cle's electr ical com­
ponen ts (e.g., when ins tall ing window
tinting) .
- Damage or malf unct ion of electrical
componen ts due to wa ter damage or any
other outside influence is not covered by
the Audi New Vehicle Limited Warranty .
See your Warranty
& Maintenance book­
l et for add itiona l details about your war­
ranty.
Cast (light ) alloy wheels
Cast (light) alloy wheels require special care.
... Wash the whee ls w ith a sponge or hose
brush
every other week .
... For deep cleaning afterwards, use only a
dedicated
acid-free cast alloy wheel cleaner.
., Rub a coat of
liquid wa x onto the r ims every
three month . Be sure to reach and treat a ll
parts of the rim .
To preserve the decorat ive appearance of the
cast a lloy whee ls, some specia l care is neces­
sary. In add it io n to road dirt and sa lt, b rake
dust is a lso cor ros ive . If left o n for too long,
b rake dust ca n cause pitting.
Use on ly special
acid-free cleaners formulated
for a lloy rims . Safe products are available at
your author ized Audi dealer. Never leave the
cleane r on the r ims longe r than spec ified o n
the label.
If no t rinsed off p romp tly, the a cid
con tained in some cleaners can attack the
threads on the whee l bolts.
Never use ab ras ive or metal polishing clean­
i ng agen ts.
If the pro te ct ive coa ting has been chipped, e.g
. by kicked up road dirt, to uch it
u p as soon as possible.
A WARNING
--
- Moisture and ice on b rakes may affect
brak ing eff ic iency
c::> page 200, Brake sys­
tem.
Test the brakes carefully each t ime
you wash the vehicle .
- Always read and heed all WARNINGS and
other information
c::> page 216.
Body cavity sealing
The body cavity sealing does not need to be
checked.
All body cavit ies which could be affected by
corros ion have been thorough ly protected at
the factory.
T his sealing does not require any inspection or
additional treatment. If any wax shou ld seep
o ut of the cavity when the ambient tempera­
ture is high, it can be
removed with a p lastic
scraper and a suitable solvent .
A WARNING
-Solvents can be dangerous.
- Benz ine is flammab le and toxic. If you
use benz ine for removing the wax, keep
sparks , flame and lighted cigarettes
away . Never dump benz ine on the
g round, into open streams or down sew­
age d rains.
- Be s ure to
observe all safety and environ­
men tal regulat ions. Follow all instruc­
tions on the container.
- Always read and heed all WAR NINGS and
other info rmation
c::> page 216.
Chassis
Have the undercoating checked for damage
from time to time .
The lower body shell of your Aud i is also thor­
oughly protected against corros io n.
Any damage to the undercoat ing ca used by
road hazards should be repaired prompt ly.

& WARNING
Too much undercoating in the wrong pla­
ces can cause a fire.
- Do not apply additional undercoating or
rustproofing on or near the exha ust
manifold, exhaust pipes, cata lytic con­
verter or heat shie lds . Wh ile driving, the
substance used for undercoating could overheat and cause a f ire.
- Always read and heed all WARNINGS and other information
c:> page 216.
Exhaust tail pipes
-
Road sa lt and other corros ive materia ls will
damage the mater ial in the exhaust tail p ipes
if they are not cleaned regula rly . Do not clean
the ta il p ipes with whee l cleaner, paint polis h,
chrome polish or othe r abrasive cleane rs.
C lean the tail p ipes wi th car care prod ucts
that are s uitab le for stain less stee l.
Your authori zed Audi dealer can provide clean­
in g p roducts t hat have been tested and ap­
p roved for you r vehi cle.
Care of interior
Radio and MMI* display
.,. Clean the d isp lay w ith a soft clea n cloth and
an LCD cleane r.
The display can be cleaned w ith a professio­
na lly available "LCD cleaner". The cloth shou ld
be slightly dampened with the clean ing flu id
to clean the display .
(D Note
To avoid scratching the display, you should
never clean it dry .
MMI control console
Applies to vehicles: with MMI
.. First clean the MMI control console with a
brus h to remove dust from the hous ing .
.,. The n w ipe the MMI con tro l c onso le w ith a
cl ean, soft, s ligh tly damp cloth .
Cleaning and protec tion 223
The M MI contro l console sho uld be cleaned
with a brush first so that no dirt is t rapped be­
tween the buttons and the housing . We rec­
ommend giving the MMI control conso le a fi ­
nal wipe with a cloth moistened with water
and dish washing detergent .
(D Note
To prevent damage, make s ure that no flu­
i d ever gets into t he MMI contro l conso le.
Aluminum trim
Use only neutral-pH products to remove spots
and deposits from aluminum surfaces .
Chrome care products a nd a lkaline cleaners
will attack a luminum surfa ces and ca n dam­
age them over t ime .
& WARNING ~
Always read and heed all WARN INGS and
other info rmation
c:> page 216.
Fabrics and fabric coverings
Fabrics and fab ric coverings (e.g . seats, door
trim pane ls, etc .) sho uld be cleaned at regular
intervals w ith a vacuum cle aner. This removes
su rface dirt particles which could become em­
bedded in the fabric through use . Steam
cleaners sho uld not be used , because the
steam te nds to p ush the dirt deeper into the
fabric and lo ck it the re.
Normal cleaning
Generally, we recommend us ing a soft sponge
o r a lint -free microfibe r clo th to t he clean fab ­
r ic. B rushes s hou ld only be used for carpets
and floo r mats, since othe r fabr ic surfa ces
cou ld be harmed by br ushes.
Normal su rface stains can be cleaned using a
comme rc ially availab le foam cleaner . Spread
the foam o n the su rface of t he fabric with a
soft sponge and wo rk it in gently . D o no t satu ­
ra te the f abric. Then pat the foam dry using
absorbent, dry cloths (e .g . m icrofi ber cloth)
and vac uum it after it has dried compl etely .
Ill>
•
•

224 Cleaning and protection
Cl ean ing s ta ins
Stains caused by beverages (e.g. coffee, fruit
juice, etc.) can be treated with a mild deter­
gent solution. App ly the detergent so lution
with a sponge. In the case of stubborn stains,
a detergent paste can be applied directly to
the stain and worked into the fabric. After­
wards, use copious amounts of clean water to remove the remaining detergent . Apply the
water with a damp cloth or sponge and pat
the fabric d ry w ith an absorbent, dry cloth.
Stains from chocolate or makeup should have
detergent paste rubbed into them. After ­
wards, remove the soap w ith water (damp
sponge) .
Alcohol can be used to treat stains from
grease, oil, lipstick or a ballpo int pen. Melted
grease or dye must be patted off using ab­
sorbent material.
It may be necessary to re­
treat the a reas with dete rgent paste and wa­
ter.
In the case of genera l so iling of the uphols­
tery and cover mater ial, we recommend h iring
a specialist that has the eq uipment to clean
the sea t covers and other fabric surfaces by
shampooing and spray extraction.
& WARNING
Always read and heed a ll WARNINGS and
the information
¢ page 216.
(D Tips
Open Ve lcro fasteners on your cloth ing can
damage the seat cover. P lease make sure
that Ve lcro fasteners are closed .
Plastic parts and instrument panel
Always use a clean cloth moistened in clear
water to clean these areas. For pers istent dirt
use an Audi approved
solv ent-fr ee plastic
cleaner/protectant.
& WARNING
Solvents can change the properties of
some p lastics and make it harder fo r the
a ir bag to deploy.
-
- Never clean the instrument panel or the
surface of airbag modu les w ith cleaning
products that conta in solvents.
- Products containing solvents will make
the surface of this pa rt porous.
- Ser ious injuries can resu lt if p lastic parts
come loose when the a irbag is deployed .
- Always read and heed all WARNINGS and
other information ¢
page 216.
(D Note
Cleaning agents conta ining so lvents wi ll
attack the material and can change the
way it behaves.
Natural leather
Applies to vehicles: with natural leather
Audi makes great efforts to maintain the
properties, natural look and feel of interior
leather.
General
We offer many different types of leather on
o u r vehicles. Most are d ifferent types of nappa
l eather, which has a smooth surface and
comes in various colors.
The intensity of the co lor determines the visu­
al characteristics and appea rance. If the sur­
face of the leather has a typica l natural look,
then the leather is a nappa leather that has
been left in a relative ly natural condit ion. This
leather offers particularly good comfort and
breathes we ll. Fine veins, closed grains, insect
bites, sk in fo lds, and subt le variations in color
rema in v is ible. These charac ter istics demon­
strate that the mate rial is natura l.
Natural nappa leather is not covered by a co l­
o r finish.
It is therefo re more sensit ive to soil­
ing and wea r, which is someth ing you need to
consider if children, animals or other fac tors
mig ht prove to be particu larly hard on the
l eather . ..,

226 Cleaning and protec tio n
• Remove specific kinds of spots (ballpoint
pen, felt marker, fingernai l polish, water­
based paint, shoe polish, etc .) with a spot
remover specifically formulated for leather .
Leath er care
• Every ha lf year use an approved leather care
product (available from your authorized
Audi dealer) to care for the leather.
• Apply the product very sparing ly.
• Wipe it off with a damp cloth.
If you have any questions about cleaning and
caring for the leather in your vehicle, it is best
to contact your author ized Audi dealer, who
will be glad to help you and tell you about our
full range of leather care products, such as:
- Leather cleaning and care
kit
- Creams to care for colored leather
- Spot removers fo r ballpo int pens, shoe po l-
ish , etc.
- Oil/grease dissolving spray
- New and upcoming products.
_& WARNING
Always read and heed a ll WARNINGS and
other information
r::!v page 216.
(D Note
- Neve r use chemical solvents (e.g . lighter
fluid, turpentine), waxes, shoe polish or
s imilar products on the leather surfaces
i n you r A ud i.
- To avoid damage, have stubborn stains
r emoved by a commer cial cleani ng spe­
cia list .
Safety belts
Only well-maintained safety belts work relia­
bly when needed.
• Keep be lts clean .
• Fo r cl eaning, use a m ild soap and wate r sol­
u tio n. Let be lts dry thoro ughly and away
from direct sunlight .
• Do not a llow inertia reel safety be lts to re ­
tract before they are completely dry . •
Check the condition of your safety be lts
reg ­
ularly .
Heavi ly so iled s afety bel ts may not ret ract
proper ly .
A WARNING
Damaged safety belts can break in a crash .
- Anyth ing that might damage your sa fety
be lts could mean that you and your pas ­
sengers would not be adequate ly pro­
tected in an accident.
- Safety belt performance depends on cor­
rect insta llation. Never remove be lts
from the veh icle to clean them.
- Do not use chemical cleaning agents,
bleach or dyes. They have corrosive prop­
erties which weaken the webb ing.
- When cleaning you r safety be lts, inspect
them for damage. If you discover dam­
age, see your authorized Audi dealer .
- Always read and heed a ll WARNINGS and
other information
r::!v page 216.
Engine compartment
Be especially careful when cleaning the en­
gine compartment.
Alway s swit ch off th e ignition before cle an­
ing the engine
r::!v .&. .
Plenum panel
Remove leaves from the plenum panel in front
of the w indshield under the eng ine hood. This
preve nts the wa ter dr ain holes from becomi ng
blocked, and it prevents debris from entering
the ve hicle interior t hrough the heating and
ventilat ion ducts .
Corrosion protection
T he eng ine compartmen t and transmission
have been co rrosion-protected a t the f actory.
Good anti-corrosion treatment is very impor­
tant, particu larly in the w inte r.
If the vehicle
is frequently d riven on salt t rea ted roads, the
en tire engine compar tment and p lenum panel
shou ld be thoroughly cleaned at the end of
winter and retreated to prevent salt damage. ...

At the same time, the underside of the vehicle
should be washed as well.
If the engine compartment is cleaned at any
time w ith grease removing solut ions
1>, or if
you have the engine washed, the anti-corro ­
sion treatment is a lmost always removed as
wel l. It is therefore essential to have a long­
lasting corrosion protection reapplied to all
surfaces, seams, joints and components in the
engine compartment .
A WARNING
Be aware: The engine compartment of any
motor vehicle is a potentially hazardous
area.
- Before working in the engine compart­
ment, be sure to read the informat io n
<=;>page 233.
- Before reaching into the front plenum
pane l, always remove the ignition key.
O therw ise, the windshield wiper system
cou ld unintentiona lly be switched on,
poss ibly causing personal injury from the
moving wiper linkage .
-Never reach into the area around or
touch the radiator fan. The auxiliary fan is temperature controlled and can switch
on suddenly- even when the ign it ion is
off.
- Do not wash, wax or dry the engine w ith
the engine running. Moving or hot parts cou ld injure you .
- Do not clean the underside of the chas­ sis, fenders, wheel covers, or other hard
to reach parts w ithout protecting your
hands and arms. You may cut yourse lf on
sharp-edged metal parts .
- Always read and heed all WARNINGS and
other information <::;>
page 216.
l) Use o nly the co rr ect clean in g s olu tio ns. Ne ve r use ga s­
o line or d ie sel fuel.
Cleaning and protec tion 227
•
•

230 Fuel supply and filling your fuel tank
-Inform your authorized Audi dealer that
you are operating or have operated the
vehicle with E85.
- Read and follow the information and tips
about gasoline¢
page 228.
@ Tips
I t may take longer to start the engine
when the outside temperature is very cold.
If possible, use winterized fuel if tempera­
tures are below freezing.
Gasoline additives
A major concern among many auto manufac­
turers is carbon deposit build-up caused by
the type of gasoline you use.
Although gasoline grades differ from one manufacturer to another, they have certain
things in common. All gasoline grades contain
substances that can cause depos its to collect
on vital engine parts, such as fuel injectors
and intake valves. Although most gasoline
b rands include additives to keep eng ine and
fuel systems clean, they are not equally effec­
tive.
Aud i recommends using TOP TIER Detergent
Gasoline. For more information on TOP TIER
Detergent Gasoline, please go to the official
website (www.toptiergas .com).
After an extended period of using inadequate
f u els, b uilt-up carbon deposits can rob your
engine of peak performance.
CJ) Note
-Damage or malfunct ion due to poor fuel
q uality is not covered by the Audi New
Vehicle Limited Warranty.
- Do not add aftermarket fuel additive
products to your fuel tank.
Fuel tank
Fuel filler neck
The fuel filler neck is located on the right rear
side panel behind the fuel filler flap . If the power
locking system should fai l, you
can still open the flap manua lly -for detailed
instructions see ¢
page 232.
You can find the fuel tank capacity of your ve­
hicle in
Technical Data ¢page 292.
The label on the inside of the fuel filler flap
te lls you the correct fuel for your veh icle. For
more information about fuel specifications,
see ¢
page 228.
Your vehicle fuel tank has an on-board refuel­
ling vapor recovery system. This feature helps
to prevent fue l vapors from escaping from the
tank and polluting the environment while you
refuel your vehicle. In order to fi ll the tank
proper ly while protecting the environment,
please fo llow this refueling procedure careful­
ly.
A WARNING "'--
Under normal operating cond itions, never
carry addit ional fuel conta iners in your car .
Gas canisters and other conta iners used to
transport fuel can be dangerous. Such con­
tainers, full or empty, may leak and could
cause a fire in a collision . If you must
transport fuel to use for your lawn mower,
snow b lower, etc., be very careful and al ­
ways observe loca l and state laws regard­
ing the use, transportation and storage of
such fuel containers. Make certain the con­
tai ner meets industry standards (ANSI/
ASTM F852 -86).
(D Note
Never drive your veh icle until the fuel tank
i s completely empty. The irregular supply
of fuel can cause misfiring. Gasoline could
enter the exhaust system and damage the
catalytic converter.

Refuelling
Fig. 191 Right rear vehicle sid e: Opening t he fuel filler
flap
Fig. 192 Fu el filler flap with attached fuel cap
When activating the central locking, the fuel
filler flap is automatically unlocked or locked.
Refuel the vehicle with the ignition turned
off.
Taking the fuel cap off
.. Press the left side of the fuel filler flap to
open it
c:> fig. 191 -arrow- .
.. Unscrew fuel cap counter-clockwise and
hang it on the fuel filler flap
c:> fig. 192.
Refuelling procedure
.. Insert the fuel nozzle from the gasoline
pump into the fuel filler neck as far as it will
go .
.. Select a medium refuelling rate so that the
nozzle switches off automatically when the
tank is full.
Putting the fuel cap back on
.. After filling your tank, twist the fuel cap
clockwise as far as it will go.
.. Close the fuel filler flap.
To avoid fuel spilling or evaporating from the
fuel tank always close fuel cap properly and completely. An improperly closed fuel filler
Fuel supply and filling your fuel tank 231
cap may also cause the MIL lamp c:> page 26
to come on.
A WARNING
Improper refueling or handling of fuel can
cause fire, explosion and severe burns.
- Fuel is highly flammable and can cause
severe burns and other injuries.
- Failure to shut the engine off while refu­
eling and/or to insert the pump nozzle
fully into the fuel filler neck could cause
fuel to spray out of filler neck or to over­
flow. Fuel spray and overflowing fuel can
cause a fire .
- Never use a cellular telephone while re­
fueling. The electromagnetic radiation
can cause sparks that can ignite fuel va­
pors and cause a fire .
- Never get back into your vehicle while re­
fueling. If in exceptional circumstances
you must get back in your vehicle while
refueling, make certain that you close
the door and touch metal to discharge static electricity before touching the fill­
er nozzle again. Static electricity can
cause sparks that can ignite fuel vapors
released during refueling .
- Never smoke or have an open flame any­
where in or near your vehicle when refu­
eling or filling a portable fuel container .
- For your safety, we strongly recommend
that you do not travel with a portable
fuel container in your vehicle . The con­
tainer, full or empty may leak and could
cause a fire, especially in a crash .
- If, under exceptional circumstances, you
must transport a portable fuel container,
please observe the following:
- Never fill a portable fuel container
while it is anywhere in or on the vehicle
(for example, in the luggage compart­
ment, or on the trunk). Static electrici­
ty can build up while filling and can ig­
nite fuel vapors causing a fire .
- Always place a portable fuel container
on the ground before filling.