instrument cluster AUDI RS5 CABRIOLET 2015 Owner's Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2015, Model line: RS5 CABRIOLET, Model: AUDI RS5 CABRIOLET 2015Pages: 284, PDF Size: 69.56 MB
Page 105 of 284

"' N
a: LL co
rl I.O
"' rl
"' rl
Selecting the driving mode
Applies to vehicles: with Audi drive select
You can choose between Comfort , Auto , Dy
namic
and Indi vidua l* modes .
Fig. 1 19 Ce nter co nsole: Con tro l for Aud i d ri ve se lect
F ig . 120 MM I* : A udi drive se lect
,.. To set the mode, press the ~:i.l'c1 button
9 fig. 119 multiple t imes until the desired
mode is displayed in the instrument cluster.
Or
Adjusting the Individual mode
Appl ies to vehicles: wit h MMI and Audi drive select
Audi dri ve sele ct 103
,.. In the MMI*, select : ICARI function button >
Comfort , Au to , D ynamic or Indi vidual *.
In vehicles without the MMI*, the r:i.rc'i button
is found underneat h the selector lever .
You can change the driving mode whe n the ve
hicle is stationary or wh ile driving. If traffic
permits, after changing modes, briefly take
you r foot off the acce le rator pedal so that the
recently selected mode is a lso activated for
the engine and transmission .
Comf ort -prov ides a comfort-orie nted ve hicle
setup and is suited for long drives on high
ways .
Auto -provides an overall comfor table ye t dy
nam ic dr iving feel and is suited for every day
u se.
D ynamic -gives the driver a sporty d riving
feel and is suited to a spo rty dr iv ing style.
Ind ividual * -¢ page 103 .
A WARNING
Pay attention to traffic when operating
drive sele ct to prevent potential risk of an
accident.
-
You can personally specify the vehicle setup in the MMI".
,.. Select the ICAR I function button > Set indi
v idu al
control button . Once you select the
menu, you will automatically drive in the
i n
di vidual
mode .
System s Comfort
Engin e/Transmi ssion
ba lanced
S te ering comfortable
Dynamic st e ering * comfortable/ind ire ct
Spo rt d ifferent ial* balanced
Adaptiv e cruise c ontrol * comfortable
Engin e sound * subtle The equipment in your vehicle will determine
which sett
ings you can adjust. The following
table prov ides an overview of the characteris
t ics of each driving mode.
Auto Dynamic
balanced sporty
balanced sporty
balanced/direct sporty/direct agile sporty
balanced sporty
subtle sporty
Page 135 of 284

M N
er
u..
co ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
Even though your vehicle is equipped with an
Advanced Airbag System, make certain that
all ch ildren, especially those 12 years and
younger, a lways ride in the back seat properly
restrained for their age and size. The airbag
on the passenger side makes the front seat a potentially dangerous place for a child to r ide.
The front seat is not the safest place for a
child in a fo rward-facing child safety seat.
It
can be a very dangerous place for an infant or
a child in a rearward-facing seat.
The Advanced Airbag System in your veh icle
h as been certified to comp ly w ith the Requ ire
ments of United States Federa l Moto r Veh icle
Safety Standard 208 as applicable at the time
your vehicle was manufactured.
The Standard requires the front a irbag on the
passenger side to be t urned off ("sup
p ressed") if a ch ild up to about one year of
age restrained in one of the rear -facing or for
ward -facing infant restraints listed in Federal
Motor Vehicle Safety Standard 208 with wh ich
the Advanced Airbag System in your vehicle
was certified has been installed on the front passenger seat . For a listing of the child re
straints that were used to certify compliance
with the US Safety Standard
Q page 154.
The PASSENGER AIR BAG OFF light in the in
strument panel tells you when the front Ad
vanced A irbag on the passenger side has bee n
turned off by the e lectronic control unit.
Each t ime you turn on the ignition, the
PAS
SENGER AIR BA G OFF
light w ill come on for a
few seco nds and :
- will stay on if the front passenger seat is not
occupied,
- will stay on if there is a small child or child restraint on the front passenger seat,
- will go off if the front passenger seat is oc
cupied by an adult as registered by the
weight-sensing mat
Q page 141, Monitor
ing the Advanced Airbag System .
The PASSENGER AIR BAG OFF light comes on
when the control un it detects a total weight
on the front passenger seat that requires the
fro nt airbag to be turned off.
A irbag system 133
If the total weight on the front passenger
seat is more than that of a typical 1 year-o ld
c hi ld but less than the weight of a small
adult, the front airbag on the passenger side
can deploy (the
PASSENGER AIR BAG OFF
light does not come on). If the PASSENG ER
AIR BAG OFF
light does not come on, the
front a irbag on the passenger side has not
been tu rned off by the elect ronic con trol unit
and can deploy if the co ntrol unit senses an
impact that meets the cond itions stored in its
memory .
For exampl e, the air ba g may deplo y if:
-a small ch ild that is heav ie r than a typical 1
year-old ch ild is o n the front passenger seat
( r egard less of whether the child is in one of
the child safety seats listed
Q page 154), or
- a child who has outgrown child restraints is
on the front passenger seat.
If the front passenger airbag is turned off, the
PASSENGER AIR BAG OFF light comes on in
the instrument cluster and stays on.
The front airbag on the passenger side may
not deploy (the P A SSENGER AIR B AG OFF
light does not illum inate and stay lit) even if a
small adult o r teenager, or a passenger who is
not sitting uprig ht with their back against a
non- re cli ned back rest w it h thei r feet on the
vehicle floor in front of the sea t is on t he front
passenger seat
~ page 113, Proper seating
position for the driver.
If the fron t passenger a irbag dep loy s, the
Federa l Standard req uires the airbag to meet
the "low risk" dep loyment criteria to reduce
the risk of injury thro ugh interact ion w it h the
airbag . "Low risk" dep loyment occ urs in those
crashes that take place at lower dece lerat ions
as defined in the electronic control unit
Q page 142, PASSENGER AIR BAG OFF light .
Always remember, a child safety seat or infant
carr ier installed on the front seat may be
struck and knocked out of posit ion by the rap
idly inflat ing passenger's airbag in a frontal
collision . T he ai rbag could greatly reduce the
effectiveness of the ch ild restraint and even
seriously inj ure the child dur ing inflation. •
•
Page 140 of 284

138 Airbag sys te m
the forward-facing child restraint. The
backrest must be adjusted to an upr ight
position.
- Make sure that the
PASSENG ER AIR BA G
OFF
light comes on and stays on all the
t ime whenever the ignition is switched
on.
Advanced Airbag System components
The front passenger seat in your vehicle has a
l ot of very important parts of the Advanced
A irbag System in it. These parts include the
weight-sens ing mat , sensors, w iring, brack
ets, and more. The function of the sys tem in
the front passenger seat is checked by the
e lectronic control unit when the ignition is on .
T he control unit mon itors the Advanced Air
bag System and turns the airbag indicator
light on when a malfunction in the system
components is detected . The function of the
a irbag ind icator light is described in greater
deta il be low . Because the front passenge r
seat conta ins important parts of the Ad
v a nce d Airbag System, you m ust ta ke care to
prevent it from be ing dam aged. Damage to
the seat may prevent the Advanced Airbag for
the front passenger seat from doing its job in
a crash .
The front Advanced Airbag System
consis ts o f the following :
-Crash sensors in the front of the veh icle that
measure veh icle acceleration/dece leration
to provide information to the Advanced Air
bag System about the severity of the crash .
- An electronic control unit, with integrated crash sensors for front and side impacts.
The contro l unit "decides" whether to fire
the front airbags based on the information
received from the crash senso rs. The co ntro l
u nit a lso "dec ides " whet he r the safety be lt
pre tensione rs should be a ctivated.
- An Advanced Airbag with gas generator and
control valve for the d river inside the s teer
i ng w hee l hub . -
An Advanced A irbag w ith gas generator and
cont ro l valve inside the instrument pane l for
the front passenger .
- A we ight -sensing mat under t he up ho lstery
padding of the front passenger seat cushion
that measures the total weight on the seat.
The informat io n registered is sent continu
ously to the electronic control unit to regu
late deployment of the front Advanced Air
bag on the passenger side .
- An airbag monitoring system and indicator
light in the instr ument cluster
q page 141.
- A sensor in each front seat registers the dis
tance betwee n the respective seat a nd the
s teer ing whee l o r i nstrument panel. The in
formation registered is sent cont inuous ly to
t he ele ct ro nic c ontro l uni t to regula te de
p loyment o f the front Adv anced A irbags .
- The
PASSENGER AIR BAG OFF light comes
on and stays on in the cen ter o f the instr u
ment panel
q page 142, fig. 152 and tells
you when the fron t Advanced Airbag on the
passenger side has been tu rned off .
- A senso r below the safety be lt latch for the
front seat passenger to meas ure t he tension
on t he safety be lt . T he tension on the safety
be lt and the weight registered by the
weight-sens ing mat he lp the control unit
"decide" whether the front airbag for the
front passenger seat should be turned off or no t
q page 132, Child restraints on the
front s eat -some important things to
k now.
- A senso r in the safety be lt latch fo r th e d riv
er and fo r the front seat passenger tha t
s enses w het he r th at safety bel t is latche d or
no t and transmi ts this information to t he
elect ronic con trol un it.
A_ WARNING
D amage to the front passenger seat can
prevent the front airbag from work ing
properly.
- Imp roper repai r or d isassembly of the
front passenge r and dr iver seat will pre
vent the Advanced Airbag System from
functioning properly .
-
Page 145 of 284

M N
er
u..
co ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
make certain that the PASSENGER AIR BAG
OFF
light stays on continuous ly whenever the
i gnit ion is on. If the
PASSENGER AIR BAG
OF F
light does not appear and not stay on all
the t ime, stop as soon as it is safe to do so
and
- react ivate the system by turning the ignition
off and then turning it on again;
- remove and reinstall the child restraint .
Make sure that the child restraint is properly
installed and that the safety belt for the
front passenger seat has been correct ly
routed around the child restraint as descr i
bed in the child restraint manufacturer's in
structions;
- make sure that the convertible locking re
tractor on the safety belt for the front pas
senger seat has been act ivated and that the
safety belt has been pulled tight. The belt
must not be loose o r have loops of slack so
that the sensor below the safety belt latch on the seat can do its job
¢ page 162 .
-make sure that things that may increase the
weight of the chi ld and child safety seat are
not being transported on the front passen
ger seat;
- make sure that the safety belt tension sen
sor is not b locked. Shake the safety belt
latch on the front passenger seat back and
forth;
- If a strap or tether is being used to tie the child safety seat to the front passenger
seat, make sure that it is not so tight that it
causes the we ight-sensing mat to measure
more we ight than is actually on the seat.
If the PA SSEN GER AIR B AG OFF light st ill
do es not come o n
and does not stay on con
tinuously (when the ignition is switched on),
- take the chi ld restraint off the front passen-
ger seat and install it properly at one of the
rear seat pos itions. Have the a irbag system
inspected by your author ized Audi dealer
i mmediately .
- move the ch ild to a rear seat posit io n and
make sure that the child is properly restrain
ed in a child restraint that is appropriate for
its size and age.
A irbag system 143
The PAS SENGER AIR BAG OFF light should
NOT come on when the ignitio n is on and an
adult is s itting in a proper seating position on
the front passenger seat. If the
PAS SENGER
AIR BAG OFF
light comes on and stays on or
flashes for about 5 seconds wh ile driving, un
der these c ircumstances, make sure that:
- the adult on the front passenger seat is properly seated on the center of the seat
cushion with his or her back up aga inst the
backrest and the backrest is not recl ined
¢ page 113, Proper occupant seating posi
tions,
- the adult is not tak ing weight off the seat by
holding on to the passenger assist handle
above the front passenger door o r support
ing thei r weight on the armrest,
- the safety belt is being properly wo rn and
tha t the re is not a lot of s lack in the safety
be lt webbing,
- accesso ry sea t covers or cushions o r other
things that may cause an incorrect reading
or imp ression on the weight-sensing mat
under the upho lstery of the seat have been
removed from the front passenger seat,
- a safety belt extender has not been left in the safety be lt latch for the front passenger
seat.
In add ition to the
PA SSENGER AIR BAG O FF
light in the center of the instrument panel,
the message
PASSENGER A IR BAG OFF or
PASSENGER AIR BAG ON will briefly appear
in the instrument cluster disp lay. This is to in
form the dr iver of the current front passenger
airbag status.
Important safety instructions on
monitoring the Advanced Airbag System
A WARNING
An airbag system that is not functioning
properly cannot provide supplemental pro
tection in a frontal crash.
- If the airbag ind icator light
¢ page 19
comes when the veh icle is being used,
have the system inspected immediately
by your authorized Audi dealer.
It i s
-
•
•
Page 151 of 284

M N
er
u..
co ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
-the two side airbags located in the sides of
the front backrests
- the airbag warning light in the instrument
cluster.
The airbag system is monitored elect ron ica lly
to make certain that it is functioning prope rly
at all times . Each time you turn on the igni
tion, the airbag system indicator light will
come on for a few seconds (self diagnostics) .
The s ide a irb ag system supplements the safe
ty belts and can help to reduce the risk of in
jury to the drive r's and front passenger's up
per torso on the side of the vehicle that is
struck in a side co llision. The airbag deploys
only in s ide impacts and only when the vehicle
accelera tion regis tered by the con trol unit is
h igh enough . If this rate is below the refer
ence va lue programmed into the control un it,
the side airbags will not be triggered , even
though the ca r may be badly damaged as a re
sult of the collision.
It is not possible to de
fine an a irbag trigger ing range that will cover
every possible angle of impact, since the cir
cumstances wi ll vary considerably between
one co llision and another. Important factors
include, for examp le, the nature (hard or soft)
of the impacting object, the angle of impact,
veh icle speed, etc .
c=;, page 1 SO, Important
safety instructions on the side airbag system .
Aside from their normal safety function, sa fe
ty belts work to he lp keep the driver or front
passenger in posit ion in the event of a side
coll is ion so that the side a irbags can provide
p rotection.
T he airbag system is
not a substitute for your
safety belt . Rather, it is pa rt of the overall oc
cupa nt restraint system in your veh icle. Al
ways remember that the side airbag system
can only help to p rotect you if yo u are wear ing
your safety bel t and wear ing it prope rly. This
is another reason why you sho uld a lways wear
your safety belts, not just beca use the law re
qu ires you to do so
c=;, page 123, General
notes.
It is important to remember that while the
supp lemental side airbag system is designed
A irbag system 149
to reduce the likelihood of ser ious injuries,
other injuries, for example, swelling, bruising ,
and minor abrasions can also be associated
with deployed side airbags. Remember too,
s ide airbags will dep loy only once and only in
certain kinds of accidents -your safety belts
are always there to offer p rotection .
Vehicle damage, repair costs or even the lack
of veh icle damage are not necessarily an indi
cation of over -sensitive or failed airbag activa
t ion. In some col lisions, both fro nt and side
airbags may i nflate. Remember too, that ai r
bags will deploy only once a nd only in ce rtain
ki nds of col lis ions -yo ur safe ty belts a re al
ways there to offe r protec tion in those acc i
dents i n which airbags are no t supposed to
deploy or when they have a lready deployed.
The side airbag system will not deploy:
- when t he ignit io n is tu rned off
- in side co llisions when the accele ration
meas ured by t he sensor is too low
- in front-end collisions
- in rear- end collisions
-in rollovers.
In some types of accidents t he front airbags
and side airbags may be tr iggere d together.
A WARNING
- Safety belts and the airbag system will
only provide protection when occupants
are in the proper seating position
¢page 150.
-If the airbag ind icator light¢ page 19
comes when the veh icle is being used,
have the system inspected immediately
by your au thorized Audi dealer .
It is pos
sible t hat the airbag will inflate when it
is not supposed to, or will not inflate
when it should . •
•
Page 173 of 284

M N
a! u.. co ,...., \!) ..,.,
,...., ..,., ,....,
@ Tips
Your vehicle may be equipped with Audi
connect. Your use of certain Aud i connect
features req uires wireless serv ices that are
provided by a third party wireless telecom
municat ions provider. For details regard
ing how information obtained through
Aud i connect is collected, processed,
transmitted, used, and shared, please see
your contra ct w ith the wire less telecom
municat ions provider and the "About A udi
connect" tab in your vehicle's MMI*:
!MENU ! button> Audi connect > About
Audi con nect .
Electronic Stabilization
Control (ESC)
Description
ESC helps to improve road holding and vehicle
dynamics to help reduce the probability of
skidd ing and loss of veh icle control. It works
only when the eng ine is running. ESC detects
certain difficult driv ing situations, including
when the vehicle is beginning to spin (yaw) out of cont ro l and he lps you to get the vehicle
back under control by select ively b rak ing the
wheels, and/or red ucing engine power and
p roviding steering assistance to help hold the
ve hicle on the driver's intended course . The in
dicator light
DJ in the instrument cluster
blinks when ESC is taking action to help you
control the vehicle.
ESC has limitations.
It is important to remem
ber that ESC cannot overcome the laws of
phys ics. It will not a lways be able to help out
under all conditions you may come up against.
For example, ESC may not always be able to
help you master situat ions where there is a
sudden change in the coefficient of fr iction of
the road surface. When there is a sect io n of
d ry road that is s udden ly cove red with water,
slush o r snow, ESC canno t perform the same
way it would on the dry su rface.
If the vehicle
hydroplanes (rides on a c ush ion of water in
stead of the road surface), ESC wi ll not be
ab le to he lp you steer the veh icle because con-
Int ellig ent technolog y 171
tact with the pavement has been interrupted
and the vehicle cannot be braked or steered .
D uring fast corner ing, particular ly on wind ing
roads, ESC cannot always deal as effectively
with difficult dr iv ing s ituations than at lower
speeds. When towing a trailer, ESC is not able
to help you regain control as it would if you
were not tow ing a trailer.
Always adjust your speed and driving style to road, traffic and weather conditions . ESC can
not override the vehicle's physical lim its, in
crease the availab le tract ion, or keep a veh icle
o n the road if road departu re is a result of
driver ina ttent io n. Instead , ESC imp roves the
poss ibility of keep ing the vehicle under con
trol and on the road during extreme maneu
vers by using the driver's steering i nputs to
help keep the vehicle go ing in the intended di
rect ion. If you are traveling at a speed that
causes you to run off the road before ESC can
provide any assistance, you may not experi
ence the benefits of ESC.
ESC is switched on all the time. In certain sit
uat ions when you need less traction, you can
switch off ASR by pressing the butto n
[ill
~ page 173, fig. 166 or~ page 173,
fig. 167. Be sure to sw itch ASR on aga in when
you no lo nger need less traction.
The following systems are integrated in the
ESC:
Anti-lock bra king sy stem (ABS )
ABS prevents the whee ls from locking up
when brak ing. T he vehicle can st ill be steered
even dur ing hard braking. App ly steady pres
su re to the brake peda l. Do not pump the ped
al. A pulsing in the brake pedal ind icates that
the system is helping you to brake the veh icle .
Brake assi st system
The brake ass ist system can decrease braking
distance. It increases brak ing power when the
drive r presses the brake peda l quickly in emer
gency s ituations. You must press and hold the
brake pedal unti l the s ituation is over. In
vehicles with adaptive c ruise control*, the
brake assis t system is more sensitive if the
•
•
Page 199 of 284

"' N
a: LL co
rl I.O
"' rl
"' rl
Checking and fillin g 197
Engine compartment
Engine compartment
These are the most important items that you can check.
Fig. 174 Typical layout for containers and engine oil filler cap
(D Coolant expansion tank (- L) . . . 202
@ Jump start point(+) under a cov-
er .. .. ... ....... ........ ..
207, 256
@ Engine o il filler cap (
head screw ............ .... .
207, 256
© Brake flu id reservoi r((())) . . . . . 204
® W indshie ld/headlight* washer
container
(0) . . . . . . . . . . . . . . 208
A WARNING
Before yo u check anything in the engine
compartment, always read and heed all
WARNINGS
q .& in Working in the engine
compartment on page 195.
-
Engine oil
Engine oil specifications
The engine oil used must conform to exact
specifications .
The service interval disp lay in the instrument
cluster of your vehicle will inform y ou when it
is time for an oil change. We recommend that
you have your oil changed by an authorized
Audi Se rv ice Advisor .
If you have to top off the o il between o il
changes, use the Audi o il quality standard
specified in the tab le.
Audi oil quality standard
Gasoline
VW 502 00 or
eng ine vw 504 00 ...
Page 200 of 284

198 Checking and filling
Using the proper engine oil is important for
the functionality and service life of the en
gine. Your engine was factory-filled with a
high-quality oil which can usually be used
throughout the entire year.
0 Note
Your Limited New Vehicle Warranty does
not cover damage or malfunctions due to
failure to follow recommended mainte
nance and use requirements as set forth in
the Audi Owner's Manual and Warranty
&
Maintenance booklet.
- Use only a high quality engine oil that ex
pressly complies with the Audi oil quality
standard specified for your vehicle's en
gine . Using any other oil can cause seri
ous engine damage.
- Do not mix any lubricants or other addi
tives into the engine oil. Doing so can
cause engine damage.
If you need to add oil and there is none
available that meets the Audi oil quality
standard your engine requires, you may
add a total of no more than 0.5 quart/liter
of a high-quality "synthetic"oil that meets
the following specifications.
- Vehicles with gasoline engine: ACEA A3
or API SM with a viscosity grade of
SAE 0W-30, SAE SW-30 or SAE SW-40.
- For more information about engine oil
that has been approved for your vehicle, please contact either your authorized
Audi dealer or Audi Customer Relations
at 1 (800) 822-2834 or visit our web site
at www.audiusa .com or
www .audicanada .ca .
Engine oil consumption
The engine in your vehicle depends on an ade
quate amount of oil to lubricate and cool all
of its moving parts.
In order to provide effective lubrication and
cooling of internal engine components, all in
ternal combustion engines consume a certain amount of oil. Oil consumption varies from
engine to engine and may change significantly
over the life of the engine. Typically, engines
with a specified break-in period (see
¢ page 179) consume more oil during the
break -in period than they consume after oil
consumption has stabilized.
Under normal conditions, the rate of oil con
sumption depends on the quality and viscosity
of the oil, the RPM (revolutions per minute) at
which the engine is operated, the ambient
temperature and road conditions . Further fac
tors are the amount of oil dilution from water
condensation or fuel residue and the oxida
tion level of the oil. As any engine is subject to
wear as mileage builds up, the oil consump
tion may increase over time until replacement of worn components may become necessary.
With all these variables coming into play, no
standard rate of oil consumption can be es
tablished or specified. There is no alternative
to regular and frequent checking of the oil lev el, see
Note.
If
the yellow engine oil level warning symbol
El in the instrument cluster lights up, you
should check the oil level as soon as possible
¢ page 199. Top off the oil at your earliest
convenience
¢ page 199.
A WARNING
--
Before you check anything in the engine
compartment, always read and heed all
WARNINGS¢
& in Working in the engine
compartment on page 195.
{(D Note
Driving with an insufficient oil level is like
ly to cause severe damage to the engine .
(D Tips
- The oil pressure warning display. is
not an indicator of the oil level. Do not
rely on it. Instead, check the oil level in
your engine at regular intervals, pref erably each time you refuel, and always
before going on a long trip. .,.
Page 201 of 284

"' N
a: LL co
rl I.O
"' rl
"' rl
-If you have the impression your engine
consumes excessive amounts of oi l, we
recommend that you consult an author
ized Audi dealer to have the cause of
your concern properly diagnosed. Keep in mind that the accurate measurement of
oil consumption requires great care and may take some time. An authorized Audi
dealer has ins tructions about how to
measure oil consumpt ion accura tely.
Checking the engine oil level
F ig. 175 MMI Display: Oil leve l indicator
Read oil le vel
"' Park your vehicle so that it is horizonta lly
level.
"' Shut the engine off when it is at operating
temperature.
"' Switch only the ignition back on .
"' Wa it approx. two minutes.
"' Se lect: Funct ion button
I _C_A_R_I > Oil l e v e l. Or
"' Se lect: Funct ion button
I CARI > Car sy s-
tem s* control button > Servicing & check s >
Oil level.
"' Read the oil leve l in the MMI* Display
r:::> fig. 175. Add engine oi l if the bar of the
o il level indicator is near "min"
r:::> page 199
Depending on the way the vehicle is driven
and the operating conditions, oil consumption
can be up to 1 quart per 600 mi les (0.8 liter
per 1,000 km). Consumption may be higher
within the first 3,000 miles (5,000 km) .
(D Tips
The oil level indicator in the MMI* Disp lay
is only an information display . If the oil
level is too low, a min imum oil warning ap-
Checkin g and fillin g 199
pears in the instrument cl uster . Add oil
Q page 199. If the hood has been opened,
the current oil leve l is shown in the instr u
ment cluster the next time the ignition is
switc hed on.
n eck
"' Before you check anything in the engine
compa rtment,
alwa ys read and h eed all
WARNINGS r::> .&. in Working in the engine
compartment on page 195.
"' Shu t the eng ine off.
"' Unscrew the cap
't::::r. to the engine oil filling
hole
¢ fig. 176, ¢page 197, fig. 174.
"'Carefully top off with 0 .5 quarts (0 .5 liters)
of the appropr iate oil
¢page 197.
"'Check the oil level again after two minutes
r:::> page 199, Checking the engine oil level.
"'Top off the o il aga in, if necessary .
"' Screw the cap back on the fi lling hole .
.&_ WARNING
-W hile topping off, the o il m ust n ot come
in contact with hot e ngine parts -fir e
hazard !
- Th e oi l filler cap mus t be p roperly se
cured to prevent oil from being sp rayed
on the hot engine and exhaus t system
when the engine is runn ing -fire haza rd!
- If you r skin has come in contact wi th the
e ngine o il, you must subse quently
cleanse it thorough ly.
(D Note
- Check the oil leve l using the r adio or
M MI*. I f the message
Plea se reduce oil
Page 242 of 284

24 0 T ire s and wheel s
According ly, when the low tire pressure te ll
tale illuminates, you shou ld stop and check
your tires as soon as possible, and inf late
them to the proper pressure. Driving on a s ig
n ificantly under-inflated tire causes the tire to
overheat and can lead to tire failure. Under-in
flation also reduces fuel efficiency and tire
tread life, and may affect the vehicle's han
dli ng and stopp ing ability.
Please note that the TPMS is not a subst itute
for proper tire maintenance, and it is the driv
e r's responsib ility to ma inta in correct tire
p ressu re, even if under- inflation has not
reached the leve l to trigger ill umination of the
TPMS low tire pressure telltale.
Your veh icle has also been equ ipped with a
TPMS malfunction indicato r to indica te when
the system is not opera ting properly. The
TPMS mal function indicator is combined wi th
the low tire press ure telltale . When the sys
tem detects a malfunction, the te lltale will
f lash fo r approximately one minute and then
remain cont inuous ly illuminated. This se
quence will continue upon subsequen t vehicle
start -ups as long as the ma lfunction ex ists .
When the malfunct ion indicator is ill uminat
ed, the system may not be able to detect or
signal low t ire pressure as intended . TPMS
malfunctions may occur for a variety of rea
sons , includ ing the installat ion of replace
ment or a lternate tires or whee ls on the veh i
cle that prevent the TPMS from funct ioning
p roperly. Always check the TPM S malf unct ion
tellta le after replacing one o r more t ires or
wheels on your veh icle to ensure that the re
p lacement or a lternate tires and wheels allow
the TPMS to continue to function p roperly. Tire pressure indicator appears
Applies to vehicles: wit h tire press ure mo nitor ing system
The tire pressure indicator in the instrument
cluster informs you if the tire pressure is too
low or if there is a system malfunction .
Fig . 1 87 Displa y: un derin flation w arnin g
U sing the ABS sensors, the tire pressure moni
toring system compares the tire tread circum
ference and vib ration characteristics of the in
dividua l tires.
If the pressure decreases in one
or more t ires, this is indicated in the instru
ment cluster with a
RI] war ning symbol and a
message ¢
fig. 187 . The driver message in the
display goes out afte r 5 seconds . The driver
message can b e displayed again by pressing
t h e
ISE TI button. If o nly one t ire is affec ted,
the d isp lay w ill indicate its posi tion.
The tire pressure monitoring system must be reset via rad io or M MI* each time the pres
su res a re adjusted (e.g. when swit ching be
tween partial and f ull load p ress ure) or after
changing or rep lacing a tire on your ve hicle
¢
page 241 . The TPMS indicator only mon i
tors the ti re pressure that yo u have previous ly
stored. You can find the recommended tire
pressures for your vehicle on the label on driv
er 's side 8-pillar ¢
page 217.
Tire tread circumference and vibration charac
teristics can change and cause a ti re pressure
warning if:
- the tire press ure in one or more tires is too
low,
- the t ire has struc tural damage,
- t he t ire p ress ure was c hanged, wheels rota t-
ed or rep laced but the TPMS was not reset
¢ page 241. ..,_