ignition AUDI RS7 SPORTBACK 2015 Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2015, Model line: RS7 SPORTBACK, Model: AUDI RS7 SPORTBACK 2015Pages: 302, PDF Size: 74.76 MB
Page 172 of 302

1 70 Child Safety
an accident. The child will strike the inÂ
terior of the vehicle and can also be
struck by the passenger.
- The child and the passenger can also
injure each other in an accident .
- Never install rear-facing child safety
seats or infant carriers on the front pasÂ
senger seat. A child will be seriously inÂ
jured and can be killed when the passen ger airbag inflates - even with an Ad Â
vanced Airbag System.
- The inflating airbag will hit the child safety seat or infant carrier with great
force and will smash the child safety seat
and child against the backrest, center
armrest, door or roof.
- Always install rear-facing child safety
seats or infant carriers on the rear seat.
- Forward-facing child safety seats instalÂ
led on the front passenger's seat can inÂ
terfere with the airbag when it inflates
and cause serious injury to the child. AlÂ
ways install forward-facing child safety
seats on the rear seat.
- If exceptional circumstances require the use of a forward-facing child restraint on
the front passenger's seat, the child's safety and well-being require that the
following special precautions be taken:
- Make sure the forward-facing seat has
been designed and certified by its manÂ
ufacturer for use on a front seat with a
passenger front and side airbag.
- Always carefully follow the manufacÂ
turer's instructions provided with the
child safety seat or carrier.
- Always move the front passenger seat
into the rearmost position of the pasÂ
senger seat's fore and aft adjustment
range, and as far away from the airbag
as possible before installing the child
restraint.
- Always make sure that nothing preÂ
vents the front passenger 's seat from
being moved to the rearmost position
in its fore and aft adjustment range.
- Always make sure that the backrest is
in the upright position . -
Never place or use any electrical device
(such as a laptop, CO player, electronic
games device, power inverter or seat
heater for child seats) on the front pasÂ
senger seat if the device is connected
to the 12-volt socket or the cigarette
lighter socket.
- If a seat heater has been retrofitted or
otherwise added to the front passenÂ
ger seat , never install any child reÂ
straint system on this seat.
- Make sure that there are no wet objects
(such as a wet towel) and no water or
other liquids on the front passenger
seat cushion.
- Never place objects on the seat (such
as a laptop, CO player, electronic
games device, power inverter or seat
heater for child seats) . These may inÂ
fluence the electrical capacitance
measured by the capacitive passenger
detection system and can also fly
around in an accident and cause serious
personal injury .
- Always buckle the child safety seat firmly
in place even if a child is not sitting in it.
A loose child safety seat can fly around
during a sudden stop or in a collision.
-Always read and heed all WARNINGS
whenever using a child restrained in aveÂ
hicle is being used
~page 130, Safety
belts,
~ page 139, Airbag system and
~ page 165, Child Safety.
A WARNING
To reduce the risk of serious injury, make
sure that the
PASSENGER AIR BAG OFF
light comes on and stays on whenever a
child restraint is installed on the front pasÂ
senger seat and the ignition is switched
on.
- Take the child restraint off the front pasÂ
senger seat and install it properly at one
of the rear seat positions if the
PASSENÂ
GER AIR BAG OFF
light does not stay on .
- Have the airbag system inspected by
your authorized Audi dealer immediate ly .
Page 176 of 302

17 4 Child Safety
- Always follow the man ufacturer's inÂ
structions provided with the child safety
seat or infant carrier.
- Always move the front passenger seat inÂ
to the rearmost position of the passenÂ
ger seat's fore and aft adjustment range,
and as far away from the airbag as possiÂ
ble before install ing the child restraint .
- Always make sure that nothing prevents
the front passenger's seat from being
moved to the rearmost position in its
fore and aft adjustme nt range.
- Always make sure the backrest is in an
upright position.
- Never place or use any electrical device
(such as a laptop, CD player, electron ic
games device, power inverter or seat
heater for child seats) on the front pasÂ
senger seat if the device is connected to
the 12-volt socket or the cigarette lightÂ
er socket.
- If a seat heater has been retrofitted or
otherwise added to the front passenger
seat, never install any child restraint sysÂ
tem on this seat.
- Make sure that there are no wet objects
(such as a wet towel) and no water or
other liquids on the front passenger seat
cushion.
- Never place objects on the seat (such as
a laptop, CD player, electronic games deÂ
vice, power inverter or seat heater for
child seats). These may influence the
electrical capacitance measured by the
capacitive passenger detection system
and can also fly around in an accident
and cause serious personal injury .
- Make sure that the
PASSENGER AIR BAG
OFF
light comes on and stays on all the
time whenever the ignition is switched
on.
- If the
PASSENGER AIR BAG OFF light
does not come on and stay on, immediÂ
ately install the forward-facing child seat
at a seating position on the rear seat and
have the airbag system inspected by your
authorized Audi dealer. -
Take the chi ld restraint off the front pasÂ
senger seat and install it properly at one
of the rear seat positions if the
PASSEN Â
GER AIR BAG OFF
light does not stay on
whenever the ign it ion is switched on.
Booster seats and safety belts
Properly used booster seats can help protect
children weighing between about 40 lbs. and
80 lbs. (18 kg and 36 kg) who are less than 4
ft. 9 in . (57 inches/1 .45 meters) tall .
"' ....
"' 0 ±
o5
Fig. 173 Rear seat: c hild properly restrained in a boosÂ
te r seat
The vehicle 's safety belts alone will not fit
most children until they are at least 4 ft . 9 in.
(57 inches/1.45 meters) tall and weigh about
80 lbs. (36 kg). Booster seats raise these ch ilÂ
dren up so that the safety belt w ill pass propÂ
er ly over the stronger parts of the ir bodies
and the safety be lt can he lp protect them in a
crash.
.,. Do not use the convertible locking retractor
when using the vehi cle's safety belt to reÂ
strain a ch ild on a booster seat.
.. The shou lder belt must lie as close to the
center of the chi ld's collar bone as possib le
and must lie flat and snug on the upper
body. It must never lie across the throat or
neck . The lap belt must lie across the pelvis
and never across the stomach or abdomen .
Make s ure the belt lies flat and snug. Pull on
the belt to tighten if necessary .
.,. If you must transport an older child in a
booster seat on the front passenger seat,
you can use the safety be lt height adjustÂ
ment to help adjust the s hou lder portion
properly. ..,.
Page 178 of 302

176 Child Saf ety
in creases the risk of serious or fatal neck
injury dramat ically.
- Children on the front seat of any car,
even w ith Advanced Airbags, can be seriÂ
ous ly injured or even killed when an a irÂ
bag inf lates.
- Never let a child stand or knee l on any
seat, for example the front seat.
- Never let a child ride in the cargo area of
your vehicle.
- Always remember that a chi ld leaning
forward, sitt ing s ideways or out of posiÂ
t ion in any way during an acc ident can be
struck by a deploying airbag . This will reÂ
sult in serious personal injury or dea th .
- If you must install a booster seat on the
front passenger seat because of excep Â
t ional circumstances the
PASSENGER
AIR BAG OFF
light must come on and
stay on, whenever the igni tion is sw itchÂ
ed on.
- If the
PASSENGER AIR BAG OFF light
does not come o n and s tay on, perform
the chec ks des cribed
<=> page 151, MoniÂ
toring the Advanced Airbag System.
- T ake the child rest rain t off the front pas Â
senge r seat and install it proper ly at one
of the rea r seat positions if the
PASSENÂ
GER AIR BAG OFF
light does not stay on
whenever the ignition is switched on.
- Always read and hee d all WARNINGS
whenever using a child rest ra ined in aveÂ
hicle is being used<=>
page 130, Safety
belts,<=> page 139, Airbag system
and
<=> page 165, Important things to know.
Installing a child safety
seat
Securing a child safety seat using a
safety belt
Safety belts for the rear seats and the front
passenger can be locked with the conver tible
locking retractor to properly secure child
safety seats.
The safety belts emergency locking retractors
f or the rear seats safe ty belts and for the fron
t passenger's seat safety be lt have a con Â
vertib le locking ret ractor for child restraints .
The safety belt m ust be locked so that be lt
webbing cannot unreel. The retractor can be activated to lock the safety belt and prevent
the safety belt webbing from looseni ng up
duri ng normal dr iv ing. A child safety seat can
o nl y be prope rly insta lled when the safety be lt
i s lo cked so that t he ch ild and child safety
sea t w ill stay in place .
Always remember : Even though your vehicle is
equipped with an Advanced Airbag system, all
c hi ld ren, especially those 1 2 years and youngÂ
er, sho uld always r ide in the back seat prope rÂ
l y restra ined for the ir age and size.
& WARNING ,____._ -
I mproperly installed chi ld safety seats in Â
crease the risk of serious pe rsonal in jury
and death in a co llision.
- Always make s ure that the safety belt reÂ
tracto r is locked when insta lling a child
safety seat. An un locked safety belt reÂ
tractor cannot hold the child safety seat
in place dur ing no rma l driving o r in a
crash .
- Always buckle the child safety seat firmly
in place even if a ch ild is not sitt ing in it .
A loose child safety seat can fly arou nd
du ring a sudden stop or in a collision.
- If the rea r set backrest is not secure ly
latched, the ch ild and the child restra int
will be throw n forwa rd togethe r with the
backrest a nd wi ll str ike par ts of t he ve hiÂ
cle interior. The chil d can be ser iously inÂ
ju red or killed.
- N ever inst all re ar- fa cing child safety
seats or in fant c arriers on the front pasÂ
sen ger seat . A child will be serious ly in Â
jured and can be killed whe n the passen Â
ge r airbag in flates.
- The inflating air bag will h it the c hild
safety seat or infant carrie r with great
force and will smash the child safety seat
and child aga inst t he backrest, center
armrest, door or roof.
Page 179 of 302

M N
0:: <.J 'SI: ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
-Always install rear-facing child safety
seats or infant carriers on the rear seat.
- Forward-facing child safety seats or inÂ
fant carriers installed on the front pas senger's seat may interfere with the deÂ
ployment of the airbag and cause serious
injury to the child.
- It is safer to install a forward-facing
child safety seat on the rear seat .
- Always read and heed all WARNINGS
whenever using a child restrained in aveÂ
hicle is being used
c;,page 165. Special
precautions apply when installing a child
safety seat on the front passenger seat
c:;, page 141, Child restraints on the front
seat -some important things to know.
_& WARNING
-
Always take special precautions if you
must install a forward or rearward-facing
child restraint on the front passenger's
seat in exceptional situations:
- Whenever a forward or rearward-facing
child restraint is installed on the front
passenger seat, the
PASSENGER AIR
BAG OFF
light must come on and stay on
whenever the ignition is switched on.
- If the PASSENGER AIR BAG OFF light
does not come on and stay on, perform
the checks described
c:;, page 151, MoniÂ
toring the Advanced Airbag System .
-Take the child restraint off the front pasÂ
senger seat and install it properly at one
of the rear seat positions if the
PASSENÂ
GER AIR BAG OFF
light does not stay on
whenever the ignition is switched on.
- Improper installation of child restraints
can reduce their effectiveness or even
prevent them from providing any protecÂ
tion.
- An improperly installed child restraint
can interfere with the airbag as it deÂ
ploys and seriously injure or even kill the
child.
- Always carefully follow the manufacturÂ
er's instructions provided with the child
safety seat or carrier.
Child Safety 177
- After checking to make sure that the
child restraint is properly installed, make
certain that the child restraint is correct ly recognized by the capacitive passenger
detection system in the front passenger
seat and that the
PASSENGER AIR BAG
OFF
light signals the correct front pasÂ
senger frontal airbag status .
_& WARNING
Forward-facing child restraints:
- Always make sure the forward-facing
seat has been designed and certified by
its manufacturer for use on a front seat
with a passenger front and side airbag.
- Never put the forward-facing child reÂ
straint up, against or very near the inÂ
strument panel.
- Always move the passenger seat into its
rearmost position in the seat's fore and
aft adjustment range, as far away from
the airbag as possible before installing
the forward-facing child restraint. The
backrest must be adjusted to an upright
position .
- Make sure that the
PASSENGER AIR BAG
OFF
light comes on and stays on all the
time whenever the ignition is switched
on.
_& WARNING
Rearward-facing child restraints:
- A child in a rearward-facing child safety
seat installed on the front passenger
seat will be seriously injured and can be killed if the front airbag inflates - even
with an Advanced Airbag System .
- The inflating airbag will hit the child
safety seat or infant carrier with great
force and will smash the child safety seat
and child against the backrest, center
armrest, door or roof.
-Always be especially careful if you must
install a rearward facing child safety seat
on the front passenger seat in exception-
al circumstances. ..,..
•
•
Page 180 of 302

178 Child Saf ety
- Make sure that the PASSENGER AIR BAG
OFF
light comes on and stays on all the
time whenever the ignition is switched on.
- If the
PASS ENGER AIR BAG OFF light
does not come on and stay on, immediÂ
ately install the rear-facing child safety
seat in a rear seating position and have
the a irbag system inspected by your Audi
dealer.
Activating the convertible locking retractor
Use the convertible locking retractor to seÂ
cure a child restraint .
Always heed the child safety seat manufacturÂ
e r's instructions when install ing a ch ild reÂ
straint in your vehicle. To activate the converÂ
tib le locking retractor:
• Place the child restraint on a seat, preferaÂ
bly on the rear seat.
• Slow ly pull the be lt
a ll th e wa y out.
• Route it around or through the chi ld reÂ
straint be lt path
q ,& .
• Push the child safety seat down with your
full weight to get the safety belt rea lly t ight.
• Insert the belt tongue into the buckle for
that seating position.
• Gu ide the safety belt back into the retractor
unt il the belt lies flat a nd snug on the ch ild
safety seat.
> You should hear a "click ing" noise as t he
belt w inds back into the ine rtia reel. Test the
convertible locking retractor by pulling on
the belt . You should no longer be able to
pull the belt out of the retractor . The conÂ
vertib le lock ing retractor is now act ivated.
• Make sure that the red release button is facÂ
ing away from the c hild restra int so that it
can be unbuckled quickly .
• Pullon the belt to make sure the safety belt
is p roperly t ight a nd fastened so that the
seat cannot move fo rward or sideways mo re
than one inch (2.5 cm).
A WARNING
Using the wrong child restraint or an imÂ
p roperly installed chi ld restraint can cause
serious pe rsonal injury or death in a c rash .
- Always make sure that the safety belt re-
tractor is loc ked when installing a child
safety seat. An un locked safety belt reÂ
tracto r cannot hold the child safety seat
in place dur ing no rma l driving o r in a
crash.
- Always buckle the child safety seat firmly
in place even if a ch ild is not si tt ing in it.
A loose child safety seat can fly around
during a s udden stop or in a crash .
- Always make sure the seat backrest to
which the child restraint is installed is in
an upright pos ition and securely latched
into place and cannot fold fo rward. OthÂ
erwise, the seatback with the child sa fety
seat attached to it could fly forward in
the event of an accident or other emerÂ
gency situation.
- Always read and heed all WARNINGS
whenever us ing a child restrained in aveÂ
h icle is being used
q page 165. Special
p recautions apply when insta lling a child
safety seat on the front passenger seat
q page 141, Child restraints on the front
seat -some important things to know.
-
Deactivating the convertible locking
retractor
The convertible locking retractor for child re Â
straints will be deactivated automatically when the belt is wound oil the way bock into
the retractor.
• Press the red b utton on the safety belt buckÂ
le. The belt tong ue will pop o ut of t he b uckÂ
le .
• Guide the safety belt all the way back into
its stowed position .
Always let the safety be lt retract completely
into its stowed position. The safety be lt can
now be used as an ordinary safety belt w ithÂ
out the convertible locking retracto r for child
rest raints .
...
Page 196 of 302

194 Intelligent technology
Basically, energy management consists o f
battery di agno sis, idling current manageÂ
ment
and dyn ami c ene rg y m anagement.
B attery diagno sis
Battery d iagnosis continuously dete rm ines
the state of the battery. Sensors determ ine
battery vo ltage, battery current and battery
temperature. This determines the current
state of charge and the power of the battery.
Idling curr ent mana gem ent
Idling c urrent management reduces energy
consumption while the vehicle is standing.
With the ignition switched off, it contro ls the
energy s upply to the various e lectrica l compoÂ
nents . Data from battery diagnosis is considÂ
ered.
D epending on the battery's state of charge,
individual consumers are gradually turned off
to prevent excess ive d ischarge of the battery
and thus mainta in start ing capability.
Dynamic en erg y managem ent
While the vehicle is being dr iven, dynamic en Â
ergy management distributes the energy genÂ
erated according to the needs of the individuÂ
a l components. It reg ulates cons umption, so
that more electrical energy is not being used
than is being generated and ensures an optiÂ
mal state of charge for the battery.
(D) Tips
- But even energy management cannot
negate the limits of physics. Consider
that the power and life of a battery are
li mited.
- If starting ab ility is threatened, t he indiÂ
cator
light (•i appears ~page 16.
What you should know
The highest priority is given to maintaining
starting capability.
The battery is severely taxed in short-distance
driving, in city traffic and during the co ld time
of year. Abu ndant e lectr ical energy is re- quired, but on
ly a little is generated .
It is also
critica l if the engine is not r unning and electriÂ
ca l components are turned on. In this inÂ
stance energy is be ing consumed but none is
being generated .
It is in precise ly these situations that you will
notice energy management active ly regu latÂ
ing the d istribution of energy.
V ehicle stand s for an e xtended period
If you do no t drive your vehicle over a period
of several days or weeks, e lectrica l compo Â
nents a re g radually cut back or switched off .
This reduces energy consumption and mainÂ
ta ins start ing capability over a longer period .
Some of the convenience functions may not
operate, such as the interior l ights or the
power seat adjustme nt. The convenience
funct ions wi ll be available again when you
switch on the ignition and sta rt the eng ine .
With the engine turned off
If you listen to the radio, for examp le, w ith
the engine turned off or use other MMI funcÂ
t io ns, the battery is be ing discharged .
If starting capability is jeopardized d ue to enÂ
ergy consumption, the following warning apÂ
pears in the MMI d isplay:
Please sta rt the engine soon o r the system
will be turned off .
The warning indicates that the system will be
turned off automatically after 3 minutes . If
you w ish to continue using the funct ions, yo u
have to start the eng ine.
With the eng ine running
Although e lectrical energy is generated when
t h e vehicle is being driven, the battery can beÂ
come discharged . This happens mostly when
li ttle energy is being generated and a great
deal consumed and the battery's state of
c h arge is not opt imal.
To bring the energy ba lance back into equili Â
brium, consumers which requ ire espec ially
large amounts of energy are temporar ily cut
back or sw itched off . Heat ing systems in .,.
Page 202 of 302

200 Driving and en vir onm ent
You must drive your vehicle about 3,000 miles
(5,000 kilometers) before you can properly
assess o il consumption.
This a lso applies to fuel consumption and enÂ
gine output.
0 Note
- Have yo ur vehicle maintained properly
and in accordance with the service recÂ
ommendations in your Warranty
& Main Â
tenance booklet. Lack of proper mainteÂ
nance as well as improper use of the veÂ
hicle will impair the funct ion of the
emission control system and could lead
to damage .
- Do not alter or remove any component of
the Emi ssion Control System unless apÂ
proved by the manufacturer .
- Do not alter or remove any dev ice, such
as heat shields, switches, ignition wires,
valves, wh ich are designed to protect
your vehicle's Emiss ion Control System
and othe r important veh icle compoÂ
nen ts.
Fewer short trips
Fuel consumption will always be relatively
high on short trips .
.. Try to avo id driving short d istances with a
co ld eng ine .
The engine and ca talytic conver ter have to
reach their optimal
op erating temp eratur e to
reduce fuel consumption and noxious emisÂ
sions effect ively.
Jus t after s tarting, a cold engine in a mid-size
car only achieves a fuel economy of 6 -8 miles
per gallon (30-40 l/100 km) . After about a
ha lf a m ile, fue l economy climbs to 12 mpg
(20 l/100 km). Afte r abo ut
2 .5 m iles (4 km),
the eng ine is at its proper ope rat ing temperaÂ
ture and fue l economy has reached a norma l
l eve l. So you can see that you should avoid
short trips whenever possib le . T
he
ou tsid e tempe rature is also critical in this
regard . Your car consumes more fue l in the
winter than in the summer.
Page 204 of 302

202 Vehicle care and cleaning
Rinse the vehicle tho roughly again and let it
air dry . Remove any water residue using a
shammy .
S tu bborn depos its s uch as bird dropp ings or
tree sap are best removed with plenty of wa Â
ter and a microfiber cloth.
A WARNING
- Only wash the vehicle when the ignition
is off and follow the instructions from
the car wash operator to reduce the risk
of accidents .
- To reduce the r isk of cuts, protect yourÂ
self from sharp meta l compone nts whe n
was hing t he underbody or the ins ide of
t h e whee l hous ings.
- After washing the vehicle, the braking ef Â
fect may be delayed due to mo isture on
the brake roto rs o r ice in th e winter . The
brakes mus t be dried first with a few
c a refu l br ake appli cat io ns.
(D Note
- If you wash t he veh icle in a n au tomatic
ca r wash, yo u m ust retrac t the r ear spoi lÂ
er if necessary, and fo ld the exter io r mirÂ
r o rs in t o reduce the r is k of dam age. P
ower fo lding ex terior mirrors * mus t on Â
ly be folde d in an d out using the powe r
folding function.
- To prevent paint damage, do not wash
the vehicle i n direct sunlight.
- T o reduce the ris k of damage to the surÂ
face, do not use insect removi ng spongÂ
es, kitchen sponges or similar items.
- Matte finish painted vehicle compo Â
nents :
- To reduce the risk of damage to the
surface, do not use polishi ng agen ts or
ha rd wa x.
- N eve r use car wash cycles that apply
p rotectiv e wax .
It can des troy the
ma tte fi nish effect .
- D o not place any st ickers o r magnet ic
signs on v ehicle parts painted w ith
ma tte fi nish paint. The paint cou ld be
d am aged when the stickers o r m agne ts
a re removed.
~ For the sake of the environment
Only wa sh the ve hicl e in facili tie s sp eci ally
d esigne d for th at pu rpose. Thi s will re duce
the r is k of dirty wate r contam inated with
oi l from entering the sewer system.
Cleaning and care information
When clea ning and cari ng fo r individua l vehiÂ
cle components, refer to the fo llow ing tab le.
The informa tion con tained there is s imply recÂ
ommendations. Fo r q uest ions or for compo -nents that are not listed
, refer to a n authorÂ
i z ed Audi dea ler or a qu alified workshop. Also
f o llow the inform ation fo und in ~ .&. .
Cleaning exterior Component Situation Solution
Wiper blades Dirty
~ page 49, Cleaning windshield wiper blades
Headlights / Dirty Soft sponge with a m ild soap solution a>
tail lights
Sensors/ Dirty Sensors: soft cloth w ith a so lvent-free cleaning product
camera lenses Camera lenses: soft cloth with an alcohol-free cleaning
so lution
Snow/ice Hand b rush/so lvent-free de -icing spray
Wheels Road salt Water
Brake d ust Acid-free special cleaning so lution
Page 210 of 302

208 Fuel suppl y and filli ng your fuel t ank
transport fue l to use for your lawn mower,
snow blower, etc., be very careful and al Â
ways observe local and state laws regardÂ
ing the use, transportat ion and storage of
such fuel containers . Make certain the conÂ
tainer meets industry standards (ANSI/
AS TM F852 -86) .
(D Note
Never drive your vehicle until the fuel tank
is completely empty. The irregular supply
of fuel can cause misfiring . Gasoline could
e nte r the exhaust sys tem and damage t he
catalyt ic converter.
Refuelling
Fig. 18 2 Rig ht rea r veh icle s ide: Ope ning the fuel fille r
f lap
Fi g. 1 83 Fuel filler fla p with attached fuel c ap
When activating the central locking, the fuel
fi ller flap is automatically un locked or locked.
Refue l the vehicle with the ignition switched
off.
Taking the fu el cap off
• Press the left side of the fue l filler flap to
open it
q fig . 182 -arrow-.
• Unsc rew fuel filler cap counter-clockwise
and hang it on the fuel fill er flap
¢ fig. 183 .
Refuelling proc edur e
• Insert the fuel nozzle from the gasoline
pump into the fuel fi ller neck as far as it wi ll
go .
• Sele ct a med ium r efuelling rate so that the
no zz le switches off automatically when the
tank is full.
Putting the fu el cap back on
• After fi lling your tank, twist the fuel filter
cap clockwise as far as it w ill go.
• Close the fue l fill er flap.
T o avoid fuel spilling or evaporating from the
fuel tank always close fuel filter cap properly and completely. An improperly closed fuel fi llÂ
er cap may also cause the MIL lamp¢
page 29
to come on.
A WARNING
Improper refue ling or handling of fuel can
cause fire, explosion and severe burns.
- Fuel is highly flammable and can cause
severe burns and other injur ies .
- Fai lure to shut the engine off while refuÂ
eling and/or to insert the pump nozzle
fully into the fuel filter neck could cause
fuel to spray out of filler neck or to overÂ
flow. Fue l spray and overflowing fuel can
cause a fire.
- Never use a ce llular telephone while reÂ
fue ling . Th e electromagnet ic rad iat io n
can cause sparks that can igni te fuel vaÂ
pors and cause a fire.
- Never get back into your vehicle whi le reÂ
fue ling.
If in exceptional circumstan ces
you must get back in your vehicle while
ref ueling, make certain that you close
the door and touch metal to discharge
static electricity before touching the fillÂ
er nozzle again . Static electricity can
cause sparks that can ignite fuel vapors
re leased during refueling .
- Never smoke or have an open f lame anyÂ
where in or near your veh icle when refuÂ
eling or filling a portable fue l conta iner .
- For your safety, we strongly recommend
that you do not travel with a portable
Page 213 of 302

"' N
a:: I.J ""'. rl I.O
"' rl
"' rl
Checking and filling Engine hood
Releasing the engine hood
The engine hood is released from inside the
vehicle .
Fig. 186 Dr ive r foo twell: re lease leve r
Fig. 187 Rocker sw itch under the hood
Make sure the wiper arms are not raised up
from the w indshield. Otherw ise the paint
could be damaged.
.. With the driver's door open , pull the lever
under the instrument panel in the direction
of the arrow
c::> fig. 186.
.. Raise the hood slightly c::> .&. .
.. Press the rocker switch under the hood upÂ
ward
c::> fig. 187 . This releases the catch.
.. Open the hood .
A WARNING
Hot engine coo lant can burn you.
- To reduce the risk of being burned, never
open the hood if you see or hear steam
or coolant escaping from the engine
compartment . Wait until no steam or
coolant can be seen or heard before careÂ
fully opening the hood.
Checkin g and fillin g 211
Working in the engine compartment
Be especially careful whenever you work in
the engine compartment.
When ev er y ou must p erform an y wor k in the
en gine com pa rtm ent , for e xample checking
a nd filling diff ere nt fluid s, th ere is a risk of
inju ry, burn s and accid ent s. To pr eve nt perÂ
so nal injury alwa ys observ e the foll owing
W ARNING S. The engin e compartm ent of any
v e hicle i s a h aza rdou s area
c::> ,& .
h WARNING
To help avoid injury, before yo u check any Â
thing under the hood:
- Turn off the engine.
- Sw itch off the ignition .
- Apply the parking brake.
- Move selector leve r to P (Park) .
- Always let the eng ine cool down . Hot
components w ill burn skin on contact .
- To reduce the risk of being burned, never
open the hood if you see or hear steam
or coo lant escaping from the engine
compa rtment. Wait unt il no steam or
coolant can be seen or heard before careÂ
fu lly opening the hood.
- Keep ch ildren away from the engine comÂ
pa rtment.
- Never sp ill fluids on hot engine compoÂ
nents . They can cause a fire .
- Never touch the rad iator fan. The auxiliÂ
ary electric fan is temperat ure controlled
and can switch on suddenly .
- Never open the coolant reservoir cap
when the engine is still warm . The coolÂ
ant system is p ressu rized and hot coolÂ
a nt cou ld spray o ut.
- Protect your face, hands and arm from
steam or hot engine coolant by plac ing a
thick rag ove r the cap when you open the
coo lant rese rvoir.
- Do not remove the engine cover under
any circumstances. This inc reases the
ris k of burns.
- If work on the fue l system o r the elec tri -
cal system is necessary:
II>-