AUDI S8 2010 Manual Online

-To angle th e s eat c ush io n down, push the sw itc h at the
front only:::::, &.
-Alt ernatively, pull the switc h at the rear only:::::,&.
& WARNING
• Never adjust the driver's or front passenger's seat while the
v ehicle is moving . If you do this while the veh icle is moving , you
will be out of po sition. Alway s adjust the driver's or front
pa ssenge r's seat when the vehicle is not mo ving.
• Be careful when adjusting the seat height. Check to see that no
one is in the way , or serious injury could result!
• Becau se the seat s can be el ectrically adjusted with the ignition
key removed, never leave children unattended in the vehicle.
Unsupervis ed use of the electri c seat adjustments may cau se
seriou s inju ry. •
Applie s to ve hicl es: with ma ssag e funct ion
Massage function
0 0
i
Fig . 74 P ow er s eat:
M assa g e f unc tion
- Press the sw itc h to turn on the massage function .
The mass age funct ion r uns fo r abo ut 10 m inutes . The passenger's
back is massaged by contin uous adjustment of the lumbar support .
Contro ls a nd e quip ­
m en t Vehicle
OP-eration
Seats and storage
The curvature of the lumbar support can also be adjusted during the
Massage to m ake it more or less aggressive. This v aries the intens ity
of t he
Massage to the leve l desired by the occupa nt.
Once the massage f unctio n stops after abo ut 10 min utes, the lumbar
s u pport a utomat ically retu rns to the posi tion i n wh ich it wa s last set.
[ i ] Tips
Th e massage f unct io n can be interrupte d at any time by pressing the
switch . The lumbar support remains in its current position. •
Adjusting the seatback
-0
i
Fig. 75 Power se at:
S w itch f or seat bac k
ang le
F ig. 76 Pow er se at:
S witch f or a dju st ing
uppe r seatba ck se ction ...
Vehicle care Do-it-yourselt service iTechnical data

Seats and storage
Adjusting the angle of the seat back
- Push the switch=> page 79, fig. 75 forward or to the rear
in the direction of the arrow to adjust the angle of the seat
back =>& .
Adjusting the angle of upper seatback section
-Push the switch=> page 79 , fig. 76 forward or to the rear
to adjust the ang le of upper seatback section => & .
& WARNING
• Never adjust the seatback while the vehicle i s moving . If you
adju st your seat while the vehicl e is moving , you are out of po si­
t ion. Neve r adjust the seatback when th e vehicle is moving .
• To reduce the ri sk of injury in the ca se of sudden brak ing or
ac cident , front pa sseng ers must ne ver ride in a moving vehicle
with th e seatba ck reclined . Safe ty belt s and the airbag sy stem
onl y offer m aximum prote ctio n when the se atback is upr ight and
the safety belt s are properly po sitioned on the bod y. The more the
seatback is reclined , the gr eater the ris k of personal inju ry from an
incorre ct seating po sition and impr operly p osition ed safe ty
belts .•
Lumbar support
The lumbar support can be adjusted to fit the natural
curva ture of the occupant's spine .
OB
Adjusting the contour
... 0
i
Fig . 7 7 P ower s eat:
S wit ch shell fo r l umba r
s u p po rt
- Push the forward depression on the switch shell to
increase the curvature.
- Push the
rear depression on the switch shell in order to
decrease the curvature .
Adjusting the height
-Push the top depression on the switch shell to mov e the
suppo rt to a
higher pos it ion in the backrest.
- Push th e
bottom depression on t he switch shell to move
the support to a
low er position in the bac krest .
The lumbar support is part icularly effective in support ing the nat ura l
curvatu re of the spin e so that the seating position is mo re comfort-
ab le ove r long d istances. ..

& WARNING
Never adjust the lumbar support while the veh icle is moving. If
you adjust your seat while the vehicle is moving, you are out of
position. Never adjust th e seatba ck when th e vehicle is moving .•
Seat adjustments in MMI
The passenger's seat ca n be adjusted t o various positions
by the d river.
I j ' • ' • ~ !
'
Passenge r's seat
• Convenience s ide v iew ....
I
-
--·· I

12 :0Q AM ',r I Fi g. 7 8 MMI di sp la y:
Pas seng er's se at
Convenience side view
- Select Systems in the CAR menu .
- Sel ect
Seat adjustment .
-Select Passenger's seat .
-Select Convenience side view=> fig . 78 .
- Con tin ue to pres s th e co ntrol knob u ntil t he adjus tment
proc ess is comp lete .
Seat symmetry
-Select Systems in the CAR menu.
Con trol s and equ ip­
ment Vehicle
OP-eration
Seats and storage
-Select Seat adjustment .
- Select Passenger's seat.
-Select Seat symmetry .
- Continue to press t he contro l kn o b un til the adjus tme nt
process is comp lete .
Using the Convenience side view fu nction, the passenger's se at is
adjus ted so that the dr iver has the best poss ib le view to the righ t.
When the Conven ience side view is set, the spec ific position of the
dr ive r's seat is taken into consideratio n.
Us ing the
Seat symmetry f u nction, the passenger's seat can be
moved to the same posi tion as the drive r's seat. The settings for the
dr iver's seat are imported and set automatically .•
Head restraints
Adjusting head restraints , front seats
The head restraints mus t be adjusted properly to provide
protection .
Vehicle care
Fig . 7 9 D riv er's s eat
h ea d re straint
ad just in g the height
tiJ,
Do-it-yourselt service iTechnical data

Seats and storage
Fig. 80 A dju sti ng th e
co mfort head r estrai nt
s ide suppor ts
The head restraints on the front seats can be adj usted to
provide safe support to head and neck at the optimum he ight
and angle . When optimally adjusted, the top of the restraint
should be level with the top of the head=>
page 191, "Proper
adjustment of head restraints" .
Height adjustment
-Push the switc h up or down to adjust t he head restraint to
your height =>
page 81, fig. 79 .
- Adjus t the head restraints so that the top of the head
restraint is
at least level with your eyes or higher .
Adjusting the angle
-Grasp the side of t he head restraints w ith bot h hands and
push them forward or bac kward.
Adjusting the side supports
- Pull or press the side supports into th e desir ed position
=> fig . 80 .
Refe r to ~ page 191, "P roper adjustment of head restrain ts" for
guidelines on how to adjust the height of the front head restra ints to
sui t the occupant's body size.
& WARNING
• Driving w ithout h ead r estraints or with head restraint s that are
not properl y adju sted increa se s the ri sk of serious or f atal n eck
i njury dramati cally .
• Read and he ed all WARNING S~
page 191 .
[ i ] Tips
• Correct ly adjusted head restra ints and safety be lts are an
extremely effective combinat ion of safety features.
• Powe r adjustable head rest raints ca n only be removed by an
author ized repair fac ility.
• When you adjust the sea t towa rd the front o r upward, the head
restraints are automatically lowered to keep them clea r of the roof
liner. Be aware that after you move the sea t ba ck agai n toward the
rear or lower it again, the head res train ts will
not automa tically
resume the ir origi na l position and have to be readjusted .•
Rear head restraint (center seating
position)
C: Fi g. 81 Center rea r
hea d restrai nt:
ad justin g the h eig ht ..

Fig. 82 Center rear
head restraint:
adjusting the height
- Push the head restraint upward until it locks in the desired
position=>
page 82, fig. 81.
- To lower it, push on the knob located on the side
=> fig. 82.
The height of the center head restraint is adjustable . It should be
adjusted to the occupant's body size. Correctly adjusted head
restraints and safety belts are an extremely effective safety feature
~ page 191 .
& WARNING
• Vehicles with power individual rear seats* have seating for
four. The long center console between the two rear seats is not a seating position. For this reason, a safety belt and an adjustable
head restraint are not provided.
• Read and heed all WARNINGS ~
page 191, "Proper adjust­
ment of head restraints". •
Con trol s and equ ip­
m ent Vehicle
OP-eration
Seats and storage
Armrest
The armrests for the driver and passenger can be
adjusted to several positions and contain a storage
compartment.
Fig. 83 Arm rests for
driver and passenger
Adjusting the armrest
-To adjust the armrest angle, pivot the armrest fully down.
- Lift the armrest detent by detent until the desired posi-
tion is reached .
Opening storage compartment
-Press the release lever=> fig. 83.
Please note that the driver's arm movements may be restricted with
th e armrest folded down. For this reason, the armrest should not be
folded down when driving in city traffic. •
Vehicle care Do-it-yourselt service iTechnical data

Seats and storage
Seat memory
Driver's seat memory
The seat adjustment settings for four drivers can be
stored using the memory buttons in the driver's door .
Fig. 8 4 Driv er's do or:
S ea t memory
In addition to the setting for the driver's seat, the settings for the
head restraints, safety belt height, steering column and both exterior
mirrors can be stored .
Storing and rec all ing settings
Using the memory buttons 1, 2, 3 and 4 , you can store and recall the
settings for four different drivers~ fig. 84.
T he current settings are also automatically stored on the remote
control key being used when the vehicle is locked. When the vehicle is
unlocked, the settings s tored on the remote control key be ing used
are automatically recalled. This function has to be activated in MMI
~pogeBS .
Turning se at m em ory on and off
If the [ ON/OFF] switch is depressed, the seat memo ry is inope rative.
The word
OFF next to the [ ON/OFF] switch illuminates.
All the sto red settings are retained. We recommend using the
[ ON/OFF ] switch and deact ivat ing the seat memory if the vehicle is only going to be used
temporarily by a driver whose settings are not
going to be stored. •
Storing and recalling a seat position
Before you can store or recall your seat position, the
[ ON/OFF) button must be engaged (down).
Storing settings
- Adjust the driver's seat==>
page 77.
- Adjust the head restraint==>
page 81.
-Adjust the steering column==> page 117 .
-Adjust both outside mirrors==> page 74. In the tilt-down
position, the passenger m irror can be adjusted to the
preferred position and saved in the seat memory .
- Press the
[SET) button and hold it down. At the same
time , press one of the memory buttons for at least one
second .
- Release the bu ttons. The settings are now stored under
the corresponding memory button .
Recalling settings
- Driver's door open - press the desired memory button.
- Driver's door closed - press the corresponding memory
button until the stored position is reached.
When the vehicle is lock ed, the current settings are stored and
assigned to the remote control key. But the settings stored on
memory buttons 1 to 4 are not deleted. They can be recalled at any
time. Whe n the vehicle is
unlock ed , the sett ings stored on the
remote control key are restored . .,_

If your vehicle is driven by other persons using your remote control
key, you should save your individual seat position on one of the
memory buttons . You can recall your settings again simply and
conveniently by pressing the corresponding memory button. When
the vehicle is locked, these settings are automatically re-assigned to
the remote control key and stored.
& WARNING
• For safety reasons, the seat setting can only be recalled when
the vehicle is stationary -otherwise you risk having an accident.
• In an emergency, the recall operation can be stopped by
pressing the [
ON/OFF] button or by briefly pressing any given
memory button. •
Activating remote control key memory
To be able to recall the stored settings with the remote
control key, the function has to be activated in MMI.
- Select: Function button (CAR]> Systems > Seat
adjustment > Driver's seat> Remote control key > on .
Con tro ls a nd e quip ­
m en t Vehicle
OP-eration
Seats and storage
Passenger's seat memory
Using the memory buttons in the passenger's door, you
can store and recall four seat settings.
Fig. 85 Passe nger's
door: seat memory
Storing and recalling settings
Using the memory buttons 1, 2, 3 and 4, you can store and recall the
sett ings for four different passengers::::;, fig. 85.
Turning seat memory on and off
If the [ ON/OFF] switch is depressed, the seat memory is inoperative.
The word
OFF next to the [ ON/OFF ] switch illuminates.
All the stored settings are retained. Now the seat can only be
adjusted electrically in the normal way. •
Rear seats
General information
Safe transportation of passengers on the rear seats
requires proper safety precautions.
All passengers on the rear seats must be seated in compliance with
the safety guidelines explained in::::;,
page 197 and ::::;, page 206. The .,
Vehicle care Do-it-yourselt service iTechnical data

Seats and storage
correct seating position is crit ica l for the safety of front and rear seat
passenge rs alike =>
page 190 .
& WARNING
• Occupant s in the front and rear seat s must alway s be properly
restr ained .
• Do not let anyone ride in the v ehicle without the h ead
re st ra ints pro vided. He ad restraints help to reduce injuries .
• Loo se item s in sid e the pas senger compartment can fly forward
in a crash or sudden maneu ve r and injure o ccupa nts . Alway s store
articles in th e lugg age compartment and u se the tie-down eyelet s.
• Read and h eed all WARNINGS =>
page 190, "P roper seating
po sition s for pa ssengers in r ear seat s". •
Applie s to v eh icles: wit h rear lum bar suppo rt
Rear seat lumbar support
The outer rear seats have a lumbar support.
Adjusting curvature
F ig. 86 Rear bench
s eat: Contro ls
- Push the switch shell forward to increase t he curvature.
- Push the switch shell to the rear to decrease the curvature .
Height adjustment
- Push the switch shell up to move the curvature higher.
- Push the switch shell down to move the curvature lower .
The lumbar support is particularly effective in supporting the nat ural
curvature of the spine so that the sea ting position is more comfort ­
ab le over long distances. •
Rear window shelf
You can place light articles of clothing on the rear window
shelf behind the seatback.
& WARNING
When driving , do n ot leave any hard objects on the rear window
s helf or a llow y our pet to sit on the shelf . They c ould be come a
haza rd for vehicle occup ants in the event of sudden b raking or a
c rash .
[ i ] Tips
• A vent slot is located between the shelf and the rear window. Do
not block the vent with any items you may place on the rear window
shelf.
• Do not place bu lky items on the rear window shelf as they could
restr ict or block the driver's vis ion in the rear view mirror. •

Individual rear seats
Applies to vehi cles: wit h in divi dua l rear sea ts
Controls
The operating logic for the s witches corresponds to the
construction and function of the seat.
Fig . 8 7 Con trols f or
individu al re ar sea ts
The switch es to ad just the seats correspond to th e layout, the design
and the func tion of the seat . The seats a re adjusted by mov ing the
switches following this logic .
@ Seat adjustmen t
® Massage funct ion*
© Head r estraint adjustment
@ Lu mb ar sup po rt
& WARNING
• Vehicles with power individual rear seats h ave seating for four.
T he lo ng ce nter console between the two rear seats is not a seating
p os ition. Therefore, a safety belt is not provided.
• The power adjustment for the individual se ats also wo rk s with
the ign it ion switched off or with the ign ition key removed . For this
reason , children should never be left unattended in the vehicle·
they could be injured!
Cont rols a nd e quip ­
m en t Vehicle
OP-eration
Seats and storage
& WARNI NG (continued )
• Exerci se caution when adju sting the seats. Unsupervised or
c arele ss seat adjustment can pinch fingers or hand s caus ing
injuries .•
A pp lies to vehicles : w it h ind iv idual rear sea ts
Seat adjustment
Seat forward/back ©
- Push the swi tch forward or back=}& .
Seat angle up/down@
- Push the switch up or down=}& .
& WARNING
Fig. 8 8 Individ ual re ar
s ea ts: S eat a dju stme nt
• Vehicles w ith power indi vidu al rear seats ha ve seating for four.
The l ong cent er cons ole between the two re ar se ats i s not a seating
position. The refore , a safety belt is not provided .
• The power adjustment for the individual seats also work s with
the ign ition switched off or with the ignition key remo ved . For th is
reason, children sh ould never be left un attended in the vehicle ·
they could be injured! .,,.
Vehicle care Do-it-yourselt service iTechnical data

Seats and storage
& WARNING (continued)
• Exercise caution when adjusting the seats. Unsupervised or
careless seat adjustment can pinch fingers or hands causing
injuries. •
Applies to veh icles : w ith in div idua l rear seats wit h massage function
Massage function
Fig. 89 Individual rear
seats : Massage func·
t ion
- Press the switch to turn on the massage function .
The massage function runs for about 10 minutes. The passenger's
back is massaged by cont inuous adjustment of the lumbar support .
The curvature of the lumbar support can also be adjusted during the
Massage to make it more or less aggress ive. This varies the intensity
of the
Ma ssage to the level desired by the occupant.
Once the massage function stops after about 10 minutes, the lumba r
support automatically returns to the position in which it was last set .
(I) Tips
The massage function can be interrupted at any time by pressing the
switch. The lumbar support remains in its current position. •
App lies to veh icles: with ind ividua l rea r seats
Head restraint adjustment
Fig. 90 Individ ual rear
s eats : Head restraint
adjustment
- Push the switch forward or back to make the head
restraint angle flatter or more upright.
0 Note
If a child seat is attached to one of the rear seats, this seat must not
be adjusted using the power controls under any circumstances. The
easy entry function for this seat must also be deactivated in the MMI
~ page 89. The child seat as well as the rear seat can be damaged by
th e adjustment process. •