BUICK LUCERNE 2006 Get To Know Guide

a. Press the MENU hard key.
b. Touch the NAV screen button or press the MENU hard key until NAV is
selected.



d. Select the address book entry that you would like to store as the preset
destination. Touch the N
AME screen button to add a name, if needed.
e. Press and hold one of the buttons at the bottom of the screen until the name
appears in that preset destination screen button. It is now available to select from
the DESTINATION ENTRY screen.

Refer to the following for further info:
Setting a Destination by Preset Destinations


Setting a Destination by Preset Destinations

This method allows you to set a destination by selecting from one of five previously stored
destinations. You can use this method while the vehicle is moving.

1. Press the DEST hard key. The DESTINATION ENTRY screen will appear. The
preset destinations are shown across the bottom of the screen and are labeled with
the name that was selected when the destination was stored. If a screen button is
dimmed, no destination has been assigned to that button.

2. Touch the desired preset destination screen. The map screen with the
destination marked will display.

3. Select the route preference (F
ASTEST, SHORTEST, or OTHER). The system will
calculate and highlight the route.

4. Select the S
TART GUIDANCE screen button. You are now ready to start your route.

Refer to the following for further info:
Deleting a Destination


Setting a Destination by Previous Destination

This method allows you to select a destination from a list of previous destination
points. Up to 100 previous destinations will be stored. As new destinations are
entered, the system will automatically delete the oldest destinations.

1. Press the DEST hard key. The DESTINATION ENTRY screen will appear.

2. Touch the P
REVIOUS DESTINATION screen button. The PREVIOUS DESTINATION
screen will appear listing your previous destinations.

3. Select a destination from the list. If the name is too long to view, touch the arrow to
the right of the destination to see the entire name. Use the up and down scroll
arrows on the left side of the screen to scroll through the list.

4. Touch the G
O screen button next to the destination you wish to select. The map
screen, with the destination marked, will display.

5. Select the route preference (F
ASTEST, SHORTEST, or OTHER). The system will
calculate and highlight the route.

6. Select the S
TART GUIDANCE screen button. You are now ready to start your route.


To delete all of the previous destinations, touch the C
LEAR ALL screen button.

Refer to the following for further info:
Deleting a Destination


Setting a Destination by Picking from the Map

This method allows you to select a destination by scrolling on the map.

1. Press the DEST hard key. The DESTINATION ENTRY screen will appear.

2. Touch the F
ROM MAP screen button. The map screen will display with a scrolling
symbol.



3. Use the zoom screen buttons and touch the map to find the area that you
would like to select as your destination. Pressing/holding and dragging your finder
on the map will activate fast scrolling.

4. Touch once the area that you would like to select as your destination. The map
screen will display the address information.

5. Select the G
O screen button. The map screen, with the destination marked, will
display.

6. Select the route preference (F
ASTEST, SHORTEST, or OTHER). The system will
calculate and highlight the route.

7. Select the S
TART GUIDANCE screen button. You are now ready to start your route.

Refer to the following for further info:
Deleting a Destination


Setting a Destination by Map Coordinates

This method allows you to select a destination by entering latitude and longitude
coordinates.

1. Press the DEST hard key. The DESTINATION ENTRY screen will appear.

2. Touch the F
ROM MAP screen button. The map screen will display with a
scrolling symbol.

3. Touch the MAP COORDINATES screen button. The COORDINATES ENTRY
screen will display.

4. Touch the L
ATITUDE screen button. Enter the numeric portion of the latitude
coordinate. Touch either N (north) or S (south) to enter the direction of the latitude
coordinate.

5. Touch the L
ONGITUDE screen button. Enter the numeric portion of the longitude
coordinate. Touch either E (east) or W (west) to enter the direction of the longitude
coordinate.

6. Once both coordinates are entered, touch the G
O screen button. The map screen
with the destination marked will display.

7. Select the route preference (F
ASTEST, SHORTEST, or OTHER). The system will
calculate and highlight the route.

8. Select the S
TART GUIDANCE screen button. You are now ready to start your route.

Setting a Destination by Intersection (Cross Street)

1. Press the DEST hard key. The DESTINATION ENTRY screen will appear.

2. Touch the A
DDRESS ENTRY screen button.

3. If you need to change the state or province, touch the (State/Province) screen
button. Does this button just show the current state? A list of all of the available
states and provinces will appear. Select the correct state or province.

4. Touch the S
TREET screen button and start entering the street name. Enter the street
name without directionals or suffixes. The number of streets matching your entry
will display in the L
IST screen button. You can touch the LIST screen button to select
a street from the list. When five or fewer names are available, a list will display
automatically. You can also touch the L
AST 5 STREETS screen button to display a list
of the last five street names entered. Select a street from the list.

5. Touch the C
ROSS STREET screen button. Enter the name of the cross street without
directionals or suffixes. The number of streets matching your entry will display in
the L
IST screen button. You can touch the LIST screen button to select a street from
the list. When five or fewer names are available, a list will display automatically.
Select the cross street from the list.

6. Touch the G
O screen button. The map screen will display with the destination
marked.

7. Select the route preference (F
ASTEST, SHORTEST, or OTHER). The system will
calculate and highlight the route.

8. Select the S
TART GUIDANCE screen button. You are now ready to start your route.

Refer to the following for further info:
Deleting a Destination


Storing Voice Tags

You can use voice recognition to set a destination. To do this, you must store voice
tags in the system. This system allows you to store up to 40 voice tags.

You must create an address book entry for the destination before storing a voice tag.

1. Press the
MENU hard key.

2. Touch the N
AV screen button, or press the MENU hard key until the NAV screen
button is selected.

3. Touch the E
DIT/VIEW Address Book screen button.

4. Touch the A
DD VOICE TAG screen button.

5. The system will ask you to state the name. You will have 5 seconds to state the
name. The system will respond back with the name.

Refer to the following for further info:
Creating an Address Book Entry

Editing an Address Book Entry

Setting a Destination through Voice Recognition

Using Voice Commands

Troubleshooting Voice Recognition


Setting a Destination through Voice Recognition

The vehicle does NOT need to be in park to use voice recognition. You must store
voice tags prior to using this method of setting a destination.

1. Press the talk symbol steering wheel control and release it when you hear a beep.

2. Clearly state one of the following commands (words in brackets are optional):

“Navigation go to [destination] (voice tag)”

OR

“Navigation select [destination] (voice tag)”

3. If you are not currently driving on a route, the system will automatically create a
route with the voice tag destination as the final destination. If you are currently
driving on a route, the system will automatically add the voice tag destination as a
waypoint. Up to three waypoints can be created.

Refer to the following for further info:
Deleting a Destination

Storing Voice Tags

Using Voice Commands

Troubleshooting Voice Recognition


Deleting a Destination

1. Press the DEST hard key. The ROUTE screen will appear.

2. Touch the C
ANCEL GUIDANCE screen button to cancel the current route.



Adding a Stopover

This feature allows you to add up to 3 stopovers between your start point and final
destination.

1. Press the DEST hard key. The ROUTE screen will appear.

2. Touch the A
DD STOPOVER screen button. This button will only appear if a route
has been calculated.

3. Enter a destination using any available method.

4. Select the route preference (F
ASTEST, SHORTEST, or OTHER). The system will
calculate and highlight the route.

5. Select the S
TART GUIDANCE screen button. You are now ready to start your
route.


To add the second and third stopovers, do the following:
a. Press the DEST hard key. The ROUTE screen will appear.
b. Press the ADD screen button where you would like the next stopover to fall on
your route.



c. Enter a destination using any available method.
d. Select the route preference (F
ASTEST, SHORTEST, or OTHER). The system will
calculate and highlight the route.
e. Select the S
TART GUIDANCE screen button. You are now ready to start your
route.

Refer to the following for further info:
Deleting a Stopover

Deleting a Stopover

1. Press the DEST hard key. The ROUTE screen will appear.

2. Select the D
ELETE screen button for the stopover that you wish to delete.



3. A pop-up confirmation message will appear. Touch the Y
ES screen button to
confirm.

4. Select the route preference (F
ASTEST, SHORTEST, or OTHER). The system will
calculate and highlight the route.

5. Select the S
TART GUIDANCE screen button. You are now ready to start your
route.



Section IV: Other Nav Features

Displaying POI Icons on Screen

You can display icons for up to 5 POI categories on the screen at a time.

1. From the map screen, touch the POI screen button. The SHOW POI ICONS screen
will appear.