temperature CITROEN C-ELYSÉE 2017 User Guide

55
C-elysee_en_Chap03_confort_ed01-2016
7. Air flow adjustment
F Press the "Large fan" button to
increase   air   flow.
F

P
ress the " Small fan " button to
reduce
  air   flow.
Deactivating the system
F Press the "Small fan" air flow button until
all   the   bars   in   the   air   conditioning   screen  
g

o   off.
This
  action   deactivates   all   functions   of   the   air  
c

onditioning   system.
The
  temperature   level   is   no   longer   controlled.  
A

  slight   flow   of   air   can   still   be   felt   however,  
r

esulting   from   the   for ward   movement   of   the  
v

ehicle.
Pressing
  the   "Large fan"
 
air   flow   button   again  
r

eactivates   the   system.
The
 
air
 
flow
 
bars
 
come
 
on
 
progressively.
Avoid
  driving   for   long   with   the   system  
d

eactivated   (risk   of   misting   and  
d

eterioration   of   air   quality).
The
 
air
 
flow
 
bars
 
go
 
off
 
progressively.
3
Comfort

56
C-elysee_en_Chap03_confort_ed01-2016
Front demist - defrost
These markings on the control panel indicate the control positions for rapid demisting or defrosting   of   the   windscreen   and   side   windows.
With the heating /
ventilation systemWith the manual air
conditioning system
(without screen)With electronic air
conditioning

(with screen)
F Put   the   temperature   and   air   flow   controls   to  t
he   dedicated   marked   position.
F
 
P
ut   the   air   intake   control   to   the   "Exterior   air  
i

ntake"   position  
 
(

manual   control   moved   to   the   right).
F
 
P
ut   the   air   distribution   control   to   the  
"

Windscreen"
 p
osition. F
 P ress   this   button. T
he l amp i n t he b utton c omes o n.
F
 
P
ress   this   button   again   to   switch  
i

t   off.
 T

he   lamp   in   the   button   goes   off.
F
 P ut   the   temperature   and   air   flow   controls   to  t
he   dedicated   marked   position.
F
 
P
ut   the   air   intake   control   to   the   "Exterior   air  
i

ntake"   position  
 
(

manual   control   to   the   right).
F
 
P
ut   the   air   distribution   control   to   the  
"

Windscreen"
 p
osition.
F
 
S
witch   on   the   air   conditioning   by   pressing  
t

he   appropriate   button;   the   lighting   of   the  
a

ssociated   control   comes   on.
Comfort

65
C-elysee_en_Chap05_conduite_ed01-2016
In certain cases, you may have to apply more   force   to   the   steering   (wheels   on  
f

ull   lock,   for   example).
Starting the engine
F With  a   petrol   engine,   operate   the   starter  m
otor   by   turning   the   key   to   position   3
without
  pressing   the   accelerator   pedal,  
u

ntil   the   engine   starts.   Once   the   engine   is  
r

unning,   release   the   key. F
 
W
ith   a   Diesel   engine,   turn   the   key   to  
p

osition 2
,   ignition   on,   to   operate   the  
eng

ine
 p
re-heating
 s
ystem.
With   the   parking   brake   applied   and   the   gearbox  
i

n neutral or position N or P
:
F  
d
epress   the   clutch   pedal   fully   (manual  
g

earbox),


or
F  
p
ress   the   brake   pedal   firmly   (electronic   or  
a

utomatic   gearbox),
F  
i
nsert   the   key   into   the   ignition   switch;   the  
s

ystem   recognises   the   code,
F  
u
nlock   the   steering   column   by  
s

imultaneously   turning   the   steering   and  
t

he key.
Wait until this warning lamp goes off in the i
nstrument   panel   then   operate   the   starter m

otor   by   turning   the   key   to   position 3
without
  pressing   the   accelerator   pedal,
 u

ntil   the   engine   starts.   Once   the   engine   is
 r

unning,   release   the   key.
If the engine does not start straight away,   switch   off   the   ignition.   Wait   a  
f

ew   moments   before   operating   the  
s

tarter   motor   again.   If   the   engine   does  
n

ot   start   after   several   attempts,   do   not  
k

eep   trying:   you   risk   damaging   the  
s

tarter   motor   or   the   engine.   Contact  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop.
In
  wintry   conditions,   the   warning   lamp  
c

an   stay   on   for   a   longer   period.   When  
t

he   engine   is   hot,   the   warning   lamp  
d

oes   not   come   on. Never   leave   the   engine   running   in  
a

n   enclosed   area   without   adequate  
v

entilation:
 in
ternal
 c
ombustion
 e

ngines   emit   toxic   exhaust   gases,  
s

uch   as   carbon   monoxide.   Danger   of  
i

ntoxication   and   death.
In   very   severe   wintry   conditions  
(

temperatures   below   -23°C),   to   ensure  
t

he   correct   operation   and   durability   of  
t

he   mechanical   components   of   your  
v

ehicle,   engine   and   gearbox,   it   is  n
ecessary   to   leave   the   engine   running  f
or   4   minutes   before   moving   off.
In
  temperate   conditions,   do   not   leave  
t

he   engine   at   idle   to   warm   up   but   move  
o

ff   straight   away   and   drive   at   moderate  
s

peed.
5
Driving

70
C-elysee_en_Chap05_conduite_ed01-2016
N appears in the instrument panel.
Y
ou   must   keep   your   foot   on   the   brake  
p

edal   while   starting   the   engine.
The   vehicle   then   moves   off   on   its   own  
(

refer to the section on the "Creep
function").
F  
S
elect   automated   mode   (position   A
),
 m
anual   mode   (position   M)   or   reverse  
(

position R
).
AUTO
 
and   1
, 1 or R appear in the
instrument
 pan
el.
F  
R
elease   the   parking   brake.
F  
P
rogressively   take   your   foot   off   the   brake  
ped

al.
Moving off
F Select position N
.
F  P ress   the   brake   pedal   fully.
F
 
S
tart   the   engine.
Do
  not   press   the   brake   and   clutch  
p

edals   simultaneously.   This   can   cause  
r

apid   clutch   wear.The
  creep   function   may   be   temporarily  
u

navailable   if   the   clutch   temperature   is  
t

oo   high   or   the   slope   too   steep.
Do
  not   leave   children   unsupervised  
i

nside   the   vehicle   when   the   engine   is  
r

unning.
F
 
A
ccelerate   away.Creep function
This function allows the vehicle to be
manoeuvred  more   easily   at   low   speeds   (when  
p

arking,   in   traffic   jams...).
With
  the   gear   selector   in   position   A, M or R ,
the vehicle moves as soon as you take your
foot off the brake pedal ,
  at   low   speed   and  
w

ith   the   engine   at   idle.
If
 
the
 
engine
 
does
 
not
 
start:
-
 
I

f
 
N
 
is
 
flashing
 
in
 
the
 
instrument
 
p

anel,
 
move
 
the
 
selector
 
to
 
p

osition


A then to position N .
-
 
I

f
 
the
 
message
 
"Foot
 
on
 
the
 
brake"
 
i

s
 
displayed,
 
press
 
the
 
brake
 
pedal
 
f

i r m l y.
Driving

74
C-elysee_en_Chap05_conduite_ed01-2016
F Apply  the   parking   brake.
F Sel ect position P or N .
F
 
S
tart   the   engine.
If
  this   procedure   is   not   followed,   there   is   an  
a

udible   signal,   accompanied   by   the   display   of  
a

n   warning   message.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
R
elease   the   parking   brake.
F

Sel
ect position R , D or M.
F
 
G
radually   release   the   brake   pedal.
The
  vehicle   moves   off   immediately.
Moving off
When the engine is running at idle, with the   brakes   released,   if   position   R, D or
M
  is   selected,   the   vehicle   moves   even  
w

ithout   the   accelerator   being   pressed.
When
  the   engine   is   running,   never  
l

eave   children   in   the   vehicle   without  
sup

ervision.
When
  carrying   out   maintenance   with  
t

he   engine   running,   apply   the   parking  
b

rake   and   select   position   P.
If position N
 
is
 
selected
 
inadvertently
 
w

hile
 
driving,
 
allow
 
the
 
engine
 
to
 
r

eturn
 
to
 
idle
 
then
 
select
 
position
 
D to
accelerate.
Never select position N while the
vehicle
  is   moving.
Never select positions P or R unless the
vehicle
  is   completely   stationary.
Automatic operation
F Select position D for automatic changing o
f   the   four   gears.
The
  gearbox   then   operates   in   auto-adaptive  
m

ode,   without   any   intervention   on   the   part  
o

f   the   driver.   It   continuously   selects   the   most  
s

uitable   gear   according   to   the   style   of   driving,  
t

he   profile   of   the   road   and   the   load   in   the  
v

ehicle.
For
  maximum   acceleration   without   touching  
t

he   selector,   press   the   accelerator   pedal   down  
f

ully   (kick   down).   The   gearbox   changes   down  
a

utomatically   or   maintains   the   gear   selected  
u

ntil   the   maximum   engine   speed   is   reached.
On
  braking,   the   gearbox   changes   down  
a

utomatically   to   provide   efficient   engine  
b

raking.
If you release the accelerator sharply, the
gearbox
  will   not   change   to   a   higher   gear   for  
s

afety   reasons.
If
 
the
 
ambient
 
temperature
 
is
 
below
 
-

23°C,
 
the
 
engine
 
should
 
be
 
left
 
at
 
idle
 
f

or
 
four
 
minutes,
 
to
 
ensure
 
the
 
correct
 
o

peration
 
and
 
life
 
of
 
the
 
engine
 
and
 
g

earbox.
Driving

78
C-elysee_en_Chap05_conduite_ed01-2016
When the engine is running at idle, with the   brakes   released,   if   position   R, D or
M
  is   selected,   the   vehicle   moves   even  
w

ithout   the   accelerator   being   pressed.
When
  the   engine   is   running,   never  
l

eave   children   in   the   vehicle   without  
sup

ervision.
When
  carrying   out   maintenance   with  
t

he   engine   running,   apply   the   parking  
b

rake   and   select   position   P.
If position N
 
is
 
selected
 
inadvertently
 
w

hile
 
driving,
 
allow
 
the
 
engine
 
to
 
return
 
t

o
 
idle
 
then
 
select
 
position
 
D before
accelerating.
If
 
the
 
ambient
 
temperature
 
is
 
below
 
-

23°C,
 
the
 
engine
 
should
 
be
 
left
 
at
 
idle
 
f

or
 
four
 
minutes,
 
to
 
ensure
 
the
 
correct
 
o

peration
 
and
 
life
 
of
 
the
 
engine
 
and
 
g

earbox.
Moving off
F Apply   the   parking   brake.
F Sel ect position P or N .
F
 
S
tart   the   engine.
If
  these   conditions   are   not   met,   there   is   an  
a

udible   signal,   accompanied   by   the   display   of  
a

n   warning   message.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
R
elease   the   parking   brake.
F

Sel
ect position R , D or M.
F
 
G
radually   release   the   brake   pedal.
The
  vehicle   moves   off   immediately.
Driving

83
C-elysee_en_Chap05_conduite_ed01-2016
Going into engine START mode Special cases: START invoked automatically
The "ECO" warning   lamp   goes  o
ff   and   the   engine   starts   with   an  
e

lectronic gearbox :
-
 
g

ear
 
selector   in   position   A or M, when you
release
  the   brake   pedal,
-
 
o

r
 
gear   selector   in   position   N   and   the   brake  
p

edal
  released,   when   you   move   the   gear  
s

elector to position A or M ,
-
 
o

r
 
when   you   engage   reverse   gear.For
  reasons   of   safety   and   for   your   comfort,  S
TART   mode   is   invoked   automatically   when:
-
 
y
ou   open   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   2   mph  
(

3 km/h)   with   an   electronic   gearbox,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   for   control   of   a   system.
The "ECO"
 

warning   lamp   flashes   for  
a

  few   seconds,   then   goes   off.
This operation is per fectly normal.
Special cases: STOP mode not
available
STOP mode is not invoked when:
-  t he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
The "ECO"
 

warning   lamp   flashes   for  
a

  few   seconds   then   goes   off.
This operation is per fectly normal.
5
Driving

84
C-elysee_en_Chap05_conduite_ed01-2016
In the event of a fault with the system, the indicator   lamp   in   the   "ECO OFF" button
flashes
  for   a   few   moments,   then   comes   on  
c

ontinuously.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the  
v

ehicle   may   stall.   All   of   the   warning   lamps  
i

n   the   instrument   panel   come   on.   It   is   then  
n

ecessary   to   switch   off   the   ignition   and   start  
t

he   engine   again   using   the   key.
Operating fault
The Stop & Start system requires 
a   12   V   battery   with   a   special  
s

pecification
 a
nd
 t
echnology.
All
  work   on   this   type   of   battery   must   be  
c

arried   out   only   by   a   CITROËN   dealer  
o

r   a   qualified   workshop.
For
  more   information   on   the   12   V  
b

attery,   refer   to   the   corresponding  
s

ection.
Press
 
this
 
button
 
to
 
deactivate
 
the
 
system.
Deactivation
 
is
 
confirmed
 
by
 
illumination
 
of
 
the
 i
ndicator
 
lamp
 
in
 
the
 
button
 
and
 
the
 
display
 
of
 
a

 
message.
Pressing
 
this
 
button
 
again
 
reactivates
 
the
 
s

ystem.
The
 
indicator
 
lamp
 
in
 
the
 
button
 
goes
 
off,
 
a

ccompanied
 
by
 
the
 
display
 
of
 
a
 
message.
Deactivation / Manual
reactivation
In certain cases, such as the need to maintain a   comfortable   temperature   in   the   passenger  
c

ompartment,   it   may   be   useful   to   deactivate   the  
S

top   &   Start   system.
The
  system   can   be   deactivated   at   any   time,  
o

nce   the   ignition   is   on.
If
  the   engine   is   in   STOP   mode,   it   then   restarts.
The
  Stop   &   Start   system   is   reactivated  
a

utomatically   every   time   the   ignition   is  
switched
  on.
Opening the bonnet
Before
  doing   anything   under   the  
b

onnet,   deactivate   the   Stop   &   Start  
s

ystem   to   avoid   the   risk   of   injury  
r

elated   to   an   automatic   change   to  
S

TART mode.
Driving on flooded roads
Before
  driving   through   a   flooded   road,  
i

t   is   strongly   recommended   that   you  
d

eactivate   the   Stop   &   Start   system.
For
  more   advice   on   driving,   particularly  
o

n   flooded   roads,   refer   to   the  
c

orresponding
 s
ection.
Driving

153
C-elysee_en_Chap09_info-pratiques_ed01-2016
Changing a bulb
Front lamps
In some weather conditions (e.g. low temperature   or   humidity),   the   presence  
o

f   misting   on   the   internal   sur face   of   the  
g

lass   of   the   headlamps   and   rear   lamps  
i

s   normal;   it   disappears   after   the   lamps  
h

ave   been   on   for   a   few   minutes.
The
 
headlamps
 
are
 
fitted
 
with
 
p

olycarbonate
 
glass
 
with
 
a
 
protective
 
c

oating:
F

d

o not clean them using a dr y
or abrasive cloth, nor with a
detergent or solvent product,
F
 
u

se
 
a
 
sponge
 
and
 
soapy
 
water
 
or
 
a
 
p

H
 
neutral
 
product,
F
 
w

hen
 
using
 
a
 
high
 
pressure
 
washer
 
o

n
 
persistent
 
marks,
 
do
 
not
 
keep
 
t

he
 
lance
 
directed
 
towards
 
the
 
l

amps
 
or
 
their
 
edges
 
for
 
too
 
long,
 
s

o
 
as
 
not
 
to
 
damage
 
their
 
protective
 
c

oating
 a

nd
 sea

ls.
Changing
 
a
 
bulb
 
should
 
only
 
be
 
done
 
a

fter
 
the
 
headlamp
 
has
 
been
 
switched
 
o

ff
 
for
 
several
 
minutes
 
(risk
 
of
 
serious
 
b

urns).
F
 
D

o
 
not
 
touch
 
the
 
bulb
 
directly
 
with
 
y

our
 
fingers,
 
use
 
a
 
lint-free
 
cloth.
It
 
is
 
imperative
 
to
 
use
 
only
 
anti-
ultraviolet
 
(UV)
 
type
 
bulbs
 
to
 
avoid
 
d

amaging
 t

he
 h

eadlamp.
Always
 
replace
 
a
 
failed
 
bulb
 
with
 
a
 
n

ew
 
bulb
 
with
 
the
 
same
 
type
 
and
 
s

pecification. 1.
D

irection indicators (PY21W amber).
2.
M

ain beam headlamps (H1-55W).
3.
D

ipped beam headlamps (H7-55W).
4.
D

aytime running lamps

/ sidelamps
(W21/5W).


or
S

idelamps (W5W).
5.
F

ront foglamps (H11-55W).
9
Practical information

173
C-elysee_en_Chap09_info-pratiques_ed01-2016
Driving advice
Distribution of loads
F Distribute  the   load   in   the   trailer   so   that   the  h
eaviest   items   are   as   close   as   possible   to  
t

he   axle   and   the   nose   weight   approaches  
t

he   maximum   permitted   without  
e

xceeding it.
Air
  density   decreases   with   altitude,   thus  
r

educing   engine   per formance.   Above  
1 0

00 metres,   the   maximum   towed   load   must  
b

e   reduced   by   10 %   for   every   1 000   metres   of  
al

titude.
Side wind
F Take   into   account   the   increased   sensitivity  t
o   side   wind.
Cooling
Towing a trailer on a slope increases the temperature   of   the   coolant.
As
  the   fan   is   electrically   controlled,   its   cooling  
c

apacity   is   not   dependent   on   the   engine   speed.
F
 
T
o   lower   the   engine   speed,   reduce   your  
s

peed.
The
  maximum   towed   load   on   a   long   incline  
d

epends   on   the   gradient   and   the   ambient  
t

emperature.
In
  all   cases,   keep   a   check   on   the   coolant  
t

emperature. F
 
I
f   the   warning   lamp   and  
t

he STOP
 
warning   lamp   come  
o

n,   stop   the   vehicle   and   switch  
o

ff   the   engine   as   soon   as  
p

ossible.
Braking
Towing a trailer increases the braking distance.
T o   avoid   overheating   of   the   brakes   on   a   long  
m

ountain   type   of   descent,   the   use   of   engine  
b

raking   is   recommended.
Ty r e s
F Check   the   tyre   pressures   of   the   towing  v
ehicle   and   of   the   trailer,   observing   the  
re

commended
 p
ressures.
Lighting
F Check  the   electrical   lighting   and   signalling  o
n   the   trailer.
Refer
 
to
 
the
 
"Technical
 
data"
 
section
 
for
 
details
 
o

f
 
the
 
weights
 
and
 
towed
 
loads
 
which
 
apply
 
to
 
y

our
 
vehicle.
The  rear   parking   sensors   will   be  
d

eactivated   automatically   if   a   genuine  
C

ITROËN   towbar   is   used.
9
Practical information