Citroen C4 2008.5 1.G Owner's Guide
Manufacturer: CITROEN, Model Year: 2008.5, Model line: C4, Model: Citroen C4 2008.5 1.GPages: 282, PDF Size: 12.65 MB
Page 31 of 282
28
I
I N S T R U M E N T S a n d C O N T R O L S
5 seconds after the ignition is
switched on, the spanner is
switched off ; the distance recorder
resumes its normal operation. The
display then indicates the total and
trip distances.
Less than 620 miles (1 000 km)
remain before the next service is due
Example: 500 miles remain before
the next service is due.
For 5 seconds after the ignition is
switched on, the display indicates: Service overdue
For 5 seconds after the ignition is
switched on,
t h e s p a n n e r fl a s h e s
to indicate that the service must be
carried out as soon as possible.
Example: the service is overdue by
300 miles.
For 5 seconds after the ignition is
switched on, the display indicates:
5 seconds after the ignition is
switched on, the distance recorder
resumes its normal operation. The
spanner remains on to indicate that
a service must be carried out soon. 5 seconds after the ignition is
switched on, the distance recorder
resumes its normal operation.
The
spanner remains lit .
More than 620 miles (1 000 km)
remain before the next service is
due
For 5 seconds after the ignition is
switched on, the spanner symbol-
ising the service operations comes
on. The distance recorder display
line indicates the distance remaining
before the next service is due.
Example: 1 900 miles remain be-
fore the next service is due.
For 5 seconds after the ignition is
switched on, the display indicates:
The distance remaining may be
weighted by the time factor, depend-
ing on the driver’s driving habits.
Therefore, the spanner may also
come on if you have exceeded the
two year service interval.
Page 32 of 282
29
I
I N S T R U M E N T S a n d C O N T R O L S
Maintenance indicator zero reset Engine oil level indicator
After each service, the maintenance
indicator must be reset to zero.
Your CITROËN technician resets the
indicator to zero after each service.
However, if you do your own servicing,
the procedure for resetting to zero is
as follows :
switch off the ignition,
press and hold the trip distance
recorder zero reset button,
switch on the ignition; the distance re-
corder display begins a countdown,
when the display indicates "=0" ,
release the button; the spanner
disappears. System which informs the driver
whether the engine oil level is cor-
rect or not.
This information is displayed for a
few seconds when the ignition is
switched on, after the service infor-
mation.
The level read will only be correct if
the vehicle is on level ground and
the engine has been off for more
than 15 minutes.
Oil level correct
Oil level low
T h i s i s i n d i c a t e d b y t h e fl a s h i n g o f
"OIL" , accompanied by an audible
signal and a message on the multi-
function screen.
I f t h e l o w o i l l e v e l i s c o n fi r m e d b y a
check using the dipstick, it is essen-
tial that the level is topped up to pre-
vent damage to the engine. Oil level gauge fault
T h i s i s i n d i c a t e d b y t h e fl a s h i n g o f
"OIL--" . Contact a CITROËN dealer.
Dipstick
Refer to the "Checks" section to lo-
c a t e t h e d i p s t i c k a n d t h e o i l fi l l e r c a p
on your engine. There are 2 marks on
the dipstick:
- A = max; never ex-
ceed this level,
- B = min; top up the
l e v e l v i a t h e o i l fi l l e r
cap, using the type
of oil suited to your
engine.
Following this operation, if you wish
to disconnect the battery, lock the
v e h i c l e a n d w a i t a t l e a s t fi v e m i n u t e s
for the zero reset to be taken into ac-
count.
Page 33 of 282
30
I
I N S T R U M E N T S a n d C O N T R O L S
Total distance recorder
System which measures the total
distance travelled by the vehicle
during its life.
The total and trip distances are dis-
played for thirty seconds when the
ignition is switched off, when the
driver’s door is opened and when
the vehicle is locked or unlocked.
Trip distance recorder
System which measures a distance
travelled during a day or other period
until it is reset to zero by the driver.
With the ignition on, press the
button until zeros appear. Dashboard lighting rheostat
Activation
Turn control A or press control B
to adjust the brightness of the
dashboard lighting,
With control B , press until the
brightness is at maximum, release,
press until you reach minimum.
Deactivation
When the lights are off, or in day
m o d e i n t h e c a s e o f v e h i c l e s fi t t e d
with daytime running lights, the but-
ton has no effect.
System permitting manual adjust-
ment of the brightness of the dash-
board to suit the level of ambient
light.
The rheostat is active if the sidela-
mps are on and applies to:
- the instrument panel,
- the display screens.
Page 34 of 282
31
II
M U L T I F U N C T I O N S C R E E N S
MULTIFUNCTION SCREEN A
Presentation
1. Time
2. Date and display zone
3. Ambient temperature
When the ambient temperature is
between +3 °C and -3 °C, the tem-
p e r a t u r e d i s p l a y fl a s h e s ( i c e r i s k ) .
The ambient temperature displayed
m a y b e g r e a t e r t h a n t h e a c t u a l t e m -
p e r a t u r e , i f t h e v e h i c l e i s p a r k e d i n
b r i g h t s u n l i g h t .
T h e d i s p l a y o f c e r t a i n t y p e s o f i n f o r -
m a t i o n i s s o m e t i m e s b y s c r o l l i n g a n d
sometimes by alternating between
t h e m .
A. A c c e s s t o t h e " M a i n M e n u "
B. S c r o l l i n g i n t h e s c r e e n m e n u s
C. C o n fi r m a t i o n a n d s e l e c t i o n i n t h e
m e n u s o f t h e f u n c t i o n c h o s e n o r
t h e v a l u e m o d i fi e d
D. C a n c e l l a t i o n o f t h e o p e r a t i o n o r
return to the previous display
E. S e l e c t i o n o f t h e t y p e o f i n f o r m a t i o n
to be displayed in zone 2 ( d a t e ,
r a d i o - C D a n d t r i p r e c o r d e r )
B or F. W i t h i n t h e m e n u s , c h o i c e
o f a c t i v a t i o n / d e a c t i v a t i o n o f
f u n c t i o n s a n d s e l e c t i o n o f
adjustments By pressing button
A , then using
button B , y o u h a v e a c c e s s t o t h e f o l -
l o w i n g f u n c t i o n s :
Page 35 of 282
32
II
M U L T I F U N C T I O N S C R E E N S D i s p l a y i n g t h e l o g o f a l e r t s
Press on A .
Use B t o s e l e c t t h e s u b m e n u f o r
o p t i o n s . C o n fi r m w i t h t w o p r e s s e s
on C .
Y o u c a n c a n c e l t h e s t a r t o f t h e d i s -
play by pressing button E to aban-
d o n a n d c o n fi r m i n g b y p r e s s i n g C .
Alerts signalled previously but not
r e s o l v e d , w i l l s c r o l l i n t h e d i s p l a y f o r
r e c a l l .
T o c l e a r t h e d i s p l a y i n g o f a n a l e r t ,
press D .
A d j u s t i n g t h e d a t e a n d t i m e
Press on A .
Use B t o s e l e c t t h e s u b m e n u f o r
d i s p l a y a d j u s t m e n t s , t h e n c o n -
fi r m b y p r e s s i n g C .
Press B t o s e l e c t w h a t y o u w a n t
t o m o d i f y : y e a r , m o n t h , d a y , h o u r ,
m i n u t e s , m o d e o f d i s p l a y .
M a k e y o u r a d j u s t m e n t b y p r e s -
sing F . Y o u c a n c o n t i n u e y o u r
a d j u s t m e n t s b y s e l e c t i n g a d i f -
ferent element by presses on B .
W h e n y o u h a v e fi n i s h e d y o u r
adjustments, press C .
C o n f i g u r i n g t h e v e h i c l e
f u n c t i o n s
Press on A .
Use B t o s e l e c t t h e s u b - m e n u f o r
p e r s o n a l i s a t i o n c o n fi g u r a t i o n o f
y o u r v e h i c l e , t h e n c o n fi r m y o u r
c h o i c e w i t h a p r e s s o n C .
S e l e c t t h e f u n c t i o n t o b e c o n fi -
gured by pressing B .
The system tells you whether
t h e f u n c t i o n s t a t u s i s a c t i v e o r
i n a c t i v e . M o d i f y t h i s s t a t u s w i t h a
press on F .
C o n fi r m w i t h a p r e s s o n C . C h o o s i n g t h e l a n g u a g e
Press on A .
Use B t o s e l e c t t h e s u b m e n u f o r
l a n g u a g e s . C o n fi r m y o u r c h o i c e
with a press on C .
With presses on F , s e l e c t t h e
l a n g u a g e o f y o u r c h o i c e , t h e n
c o n fi r m w i t h a p r e s s o n C .
C h o o s i n g t h e u n i t s
Press on A .
Press B t o s e l e c t t h e s u b - m e n u
f o r U n i t s . C o n fi r m y o u r c h o i c e
with a press on C .
Press B t o s e l e c t t h e t y p e o f u n i t
y o u w i s h t o m o d i f y ( T e m p e r a t u r e
o r F u e l C o n s u m p t i o n ) .
With presses on F , s e l e c t t h e
u n i t o f y o u r c h o i c e , t h e n c o n fi r m
with a press on C .
T h i s c h o i c e c o n c e r n s a l l t h e i n f o r m a -
t i o n ( C o n s u m p t i o n - S p e e d ) a p p e a r i n g
o n t h e d i s p l a y s c r e e n s .
Page 36 of 282
33
II
M U L T I F U N C T I O N S C R E E N S
MULTIFUNCTION SCREEN C M a i n M e n u
Presentation
Radio-CD
( s e e " A u d i o " )
T r i p c o m p u t e r
T h i s p e r m i t s :
B l u e t o o t h
®
h a n d s - f r e e k i t
( s e e " A u d i o " )
Controls
1. Time
2. Ambient temperature
3. Date and display zone
When the ambient temperature is
between +3 °C and -3 °C, the tem-
p e r a t u r e d i s p l a y fl a s h e s ( i c e r i s k ) .
The ambient temperature displayed
m a y b e g r e a t e r t h a n t h e a c t u a l t e m -
p e r a t u r e , i f t h e v e h i c l e i s p a r k e d i n
b r i g h t s u n l i g h t .
I t i s r e c o m m e n d e d t h a t t h e d r i v e r
s h o u l d n o t o p e r a t e t h e c o n t r o l s
w h i l e t h e v e h i c l e i s i n m o t i o n .
A. A c c e s s t o t h e " M a i n M e n u "
B. S c r o l l i n g i n t h e s c r e e n m e n u s
C. C o n fi r m a t i o n a n d s e l e c t i o n i n t h e
m e n u s o f t h e f u n c t i o n c h o s e n o r
t h e v a l u e m o d i fi e d
D. C a n c e l l a t i o n o f t h e o p e r a t i o n o r
return to the previous display
E. S e l e c t i o n o f t h e t y p e o f i n f o r m a -
tion to be displayed permanently
( d a t e , r a d i o - C D , t r i p c o m p u t e r )
o n t h e r i g h t o f t h e s c r e e n ( S e e
" T r i p c o m p u t e r " ) Press button
A t o v i e w t h e " M a i n
M e n u " o f t h e m u l t i f u n c t i o n s c r e e n .
T h i s m e n u g i v e s y o u a c c e s s t o t h e
f o l l o w i n g f u n c t i o n s :
- e n t e r i n g t h e d i s t a n c e t o y o u r destination,
- a c c e s s t o t h e l o g o f a l e r t s ( r e c a l l o f a l e r t s s i g n a l l e d p r e v i o u s l y ) ,
- a c c e s s t o t h e s t a t u s o f f u n c t i o n s , s u c h a s t h e a c t i v a t i o n / d e a c t i v a -
t i o n o f t h e a u t o m a t i c h e a d l a m p s ,
o f t h e a u t o m a t i c w i n d s c r e e n
w i p e r s , o f t h e E S P . . .
Page 37 of 282
34
II
M U L T I F U N C T I O N S C R E E N S
Personalisation -
C o n f i g u r a t i o n
T h i s p e r m i t s a c t i v a t i o n / d e a c t i v a t i o n
o f t h e :
- a u t o m a t i c o p e r a t i o n o f t h e r e a r wiper when reverse gear is
engaged,
- a u t o m a t i c g u i d e - m e - h o m e l i g h t i n g ,
- X e n o n d u a l - f u n c t i o n d i r e c t i o n a l headlamps,
a n d s e l e c t i o n o f t h e :
- brightness intensity, time, date and units,
- s c r e e n l a n g u a g e . A c t i v a t i n g / d e a c t i v a t i n g t h e
r e a r s c r e e n w i p e w h e n y o u
e n g a g e r e v e r s e g e a r
Press on A .
Use B t o s e l e c t " P e r s o n a l i s a t i o n -
C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r
c h o i c e w i t h a p r e s s o n C .
T h e n s e l e c t t h e s u b - m e n u f o r
v e h i c l e p a r a m e t e r s . C o n fi r m
y o u r c h o i c e w i t h a p r e s s o n C .
Using B , s e l e c t " p a r k i n g a s s i s -
t a n c e " . C o n fi r m y o u r c h o i c e w i t h
a press on C .
Then by pressing C , s e l e c t /
d e s e l e c t " t r i g g e r i n g o f r e a r
s c r e e n w i p e i n r e v e r s e g e a r " t o
a c t i v a t e / d e a c t i v a t e t h i s .
C o n fi r m w i t h "OK" on the
s c r e e n .
A c t i v a t i n g / d e a c t i v a t i n g t h e
a u t o m a t i c g u i d e - m e - h o m e
l i g h t i n g
Press on A .
Use B t o s e l e c t " P e r s o n a l i s a t i o n -
C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r
c h o i c e w i t h a p r e s s o n C .
T h e n s e l e c t t h e s u b - m e n u f o r
v e h i c l e p a r a m e t e r s . C o n fi r m
y o u r c h o i c e w i t h a p r e s s o n C .
Using B , s e l e c t " l i g h t i n g a n d
s i g n a l l i n g " . C o n fi r m y o u r c h o i c e
with a press on C .
Then by pressing C , s e l e c t / d e s e -
l e c t " g u i d e - m e - h o m e l i g h t i n g " t o
a c t i v a t e / d e a c t i v a t e t h i s . A f t e r a c t i -
v a t i o n , c h o o s e i t s d u r a t i o n : p r e s s
on C , then use B t o s e l e c t t h e
duration and then press on C .
C o n fi r m w i t h "OK" on the
s c r e e n .
A c t i v a t i n g / d e a c t i v a t i n g
t h e X e n o n d u a l - f u n c t i o n
d i r e c t i o n a l h e a d l a m p s
Press on A .
Use B t o s e l e c t " P e r s o n a l i s a t i o n -
C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r
c h o i c e w i t h a p r e s s o n C .
T h e n s e l e c t t h e s u b - m e n u f o r
v e h i c l e p a r a m e t e r s . C o n fi r m
y o u r c h o i c e w i t h a p r e s s o n C .
Using B , s e l e c t " d r i v i n g a s s i s -
t a n c e " . C o n fi r m y o u r c h o i c e w i t h
a press on C .
Then by pressing C , s e l e c t / d e s e -
l e c t " d i r e c t i o n a l h e a d l a m p s " t o
a c t i v a t e / d e a c t i v a t e t h e m .
C o n fi r m w i t h "OK" on the
s c r e e n .
Page 38 of 282
35
II
M U L T I F U N C T I O N S C R E E N S
A d j u s t i n g t h e d a t e a n d t i m e
Press on A .
Use B t o s e l e c t " P e r s o n a l i s a t i o n -
C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r
c h o i c e w i t h a p r e s s o n C .
S e l e c t t h e d i s p l a y c o n fi g u r a t i o n
using B . C o n fi r m w i t h a p r e s s
on C .
S e l e c t t h e a d j u s t m e n t f o r t h e
date and time, using B . C o n fi r m
with a press on C . C h o o s i n g t h e u n i t s
Press on A .
Use B t o s e l e c t " P e r s o n a l i s a t i o n -
C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r
c h o i c e w i t h a p r e s s o n C .
S e l e c t t h e d i s p l a y c o n fi g u r a t i o n
using B . C o n fi r m w i t h a p r e s s
on C .
T h e n s e l e c t t h e s u b - m e n u f o r
u n i t s . C o n fi r m y o u r c h o i c e w i t h a
press on C .
Using B , s e l e c t t h e u n i t y o u
w i s h t o m o d i f y ( T e m p e r a t u r e o r
C o n s u m p t i o n ) , t h e n c o n fi r m b y
pressing C .
C o n fi r m w i t h "OK" on the
s c r e e n .
T h i s c h o i c e c o n c e r n s a l l t h e i n f o r -
m a t i o n ( C o n s u m p t i o n - S p e e d ) a p -
p e a r i n g o n t h e s c r e e n s . C h o o s i n g t h e l a n g u a g e
Press on A .
Use B t o s e l e c t " P e r s o n a l i s a t i o n -
C o n fi g u r a t i o n " , t h e n c o n fi r m y o u r
c h o i c e w i t h a p r e s s o n C .
M a k e y o u r c h o i c e o f l a n g u a g e
using B . C o n fi r m w i t h a p r e s s
on C .
Using B , s e l e c t t h e l a n g u a g e a n d
c o n fi r m y o u r c h o i c e w i t h a p r e s s
on C .
C o n fi r m w i t h "OK" on the
s c r e e n .
Press B t o s e l e c t t h e v a l u e s y o u
w i s h t o m o d i f y . C o n fi r m y o u r
c h o i c e w i t h a p r e s s o n C .
M a k e y o u r a d j u s t m e n t s b y p r e s -
sing B , c o n fi r m i n g e a c h a d j u s t -
m e n t c h o i c e b y p r e s s i n g C .
Validate with "OK" on the
s c r e e n .
Page 39 of 282
36
II
M U L T I F U N C T I O N S C R E E N S
NAVIDRIVE MULTIFUNCTION COLOUR SCREEN
Presentation
1. Ambinet temperature
2. D i r e c t o r y
3. Date
4. Telephone
5. Time
When the ambient temperature is
between +3 °C and -3 °C, the tem-
p e r a t u r e d i s p l a y fl a s h e s ( r i s k o f i c e ) .
The ambient temperature displayed
m a y b e g r e a t e r t h a n t h e a c t u a l t e m -
p e r a t u r e , i f t h e v e h i c l e i s p a r k e d i n
b r i g h t s u n l i g h t .
I t i s r e c o m m e n d e d t h a t t h e d r i v e r
s h o u l d n o t o p e r a t e t h e c o n t r o l s
w h i l e t h e v e h i c l e i s i n m o t i o n . Controls
M a i n M e n u
T r a f fi c I n f o r m a t i o n
N a v i g a t i o n / G u i d a n c e
Map
A u d i o F u n c t i o n s
T e l e m a t i c s
C o n fi g u r a t i o n ,
for adjusting various para-
m e t e r s ( d a t e , t i m e , u n i t s )
Video
V e h i c l e D i a g n o s t i c s
A. A c c e s s t o t h e " M a i n M e n u "
B. S c r o l l i n g i n t h e s c r e e n m e n u s
C. C o n fi r m a t i o n a n d s e l e c t i o n i n t h e
m e n u s o f t h e f u n c t i o n c h o s e n o r
t h e v a l u e m o d i fi e d
D. C a n c e l l a t i o n o f t h e o p e r a t i o n o r
return to the previous display
E. S e l e c t i o n o f t h e t y p e o f i n f o r m a -
tion to be displayed permanently
( d a t e , r a d i o - C D , t r i p c o m p u t e r )
o n t h e r i g h t o f t h e s c r e e n Press on the button
A to view the
" M a i n M e n u " o f t h e m u l t i f u n c t i o n
s c r e e n .
T h i s m e n u g i v e s y o u a c c e s s t o t h e
f o l l o w i n g f u n c t i o n s ( s e e " N a v i D r i v e
I n s t r u c t i o n s " ) :
Page 40 of 282
37
II
M U L T I F U N C T I O N S C R E E N S
TRIP COMPUTER
S y s t e m w h i c h p r o v i d e s c u r r e n t
i n f o r m a t i o n c o n c e r n i n g t h e r o u t e
t r a v e l l e d ( r a n g e , c o n s u m p t i o n . . . ) .
M o n o c h r o m e s c r e e n A Data displays
P r e s s t h e c o n t r o l f o r m o r e t h a n
t w o s e c o n d s t o r e s e t t o z e r o t h e
d i s t a n c e t r a v e l l e d , t h e a v e r a g e
c o n s u m p t i o n a n d t h e a v e r a g e
s p e e d .
Zero reset
T h e t r i p c o m p u t e r p r o v i d e s t h e f o l -
l o w i n g i n f o r m a t i o n :
- range,
- c u r r e n t c o n s u m p t i o n ,
- d i s t a n c e t r a v e l l e d ,
- a v e r a g e c o n s u m p t i o n ,
- a v e r a g e s p e e d .
The next press then returns you
t o t h e n o r m a l d i s p l a y .
P r e s s t h e b u t t o n , l o c a t e d a t t h e
end of the wiper
s t a l k , to display
t h e v a r i o u s i t e m s o f t r i p c o m p u -
t e r d a t a i n s u c c e s s i o n .