stop start Citroen C4 2016 2.G User Guide

56
C4-2_en_Chap02_ouvertures_ed02-2015
Remote control key
System which permits central unlocking or locking of the vehicle using the door lock or from a distance. It is also used to locate and start the vehicle, as well   as   providing   protection   against   theft.
Unlocking the vehicle
Unfolding the key
F Press  this   button   to   unfold   the   key.
F  
P
ress   the   open   padlock   to   unlock  
t

he   vehicle   completely. F
 
P
ress   the   open   padlock   once   to  
u

nlock   the   driver's   door   only.
Selective unlocking using the
remote control
F Maintain the press on the open
padlock   until   the   desired   position  
i

s   obtained.   The   windows   stop   as  
s

oon   as   you   release   the   button.
Opening the windows using the
remote control
Unlocking using the key
F Turn  the   key   for wards   in   the   driver's   door  l
ock   to   unlock   the   vehicle   completely.
Complete unlocking using the
remote control
F Press  the   open   padlock   again   to   unlock   the  o
ther   doors   and   the   boot.
The direction indicators flash for a
few seconds.
The
  spotlamps   in   the   door   mirrors  
come
  on.
Depending
  on   version,   the   door   mirrors  
u

nfold,   the   welcome   lighting   comes   on,  
t

he   alarm   is   deactivated.
The
  complete   or   selective   door  
u

nlocking   parameter   is   set   via   the  
v

ehicle   configuration   menu.
Access

65
C4-2_en_Chap02_ouvertures_ed02-2015
Back-up key
The integral key is used to lock and unlock the vehicle   when   the   electronic   key   cannot   operate:
-
 
c
ell   battery   flat,   vehicle   battery   discharged  
o

r   disconnected,   ...
-
 
v
ehicle   located   in   an   area   with   strong  
e

lectromagnetic
 si
gnals.
F

M
aintain a pull on button 1 ,
  to   extract   the  
i

ntegral   key   2.
Unlocking / Locking using the integral key with Keyless
Entry and Starting
If the alarm is activated, the audible s
ignal   triggered   on   opening   a   door  
w

ith   the   key   (integral   with   the   remote  
c

ontrol)   will   stop   when   the   ignition   is  
s

witched   on.Locking the driver's door
F Insert   the   integral   key   in   the   door   lock,   then  t
urn   it   to   the   rear.
Unlocking the driver's door
F Insert  the   integral   key   in   the   door   lock,   then  t
urn   it   to   the   front.
2
Access

68
C4-2_en_Chap02_ouvertures_ed02-2015
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle,   without   you   being   aware   of   it.
Do
  not   repeatedly   press   the   buttons   of   your   remote   control   out   of   range   and   out   of   sight   of   your   vehicle.   You   run   the   risk   of   stopping   it   from  
w

orking   and   the   remote   control   would   have   to   be   reinitialised.
The
  remote   control   does   not   operate   when   the   key   is   in   the   ignition,   even   when   the   ignition   is   switched   off.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency services more difficult in an emergency.
A s   a   safety   precaution   (with   children   on   board),   remove   the   key   from   the   ignition   or   take   the   electronic   key   when   you   leave   the   vehicle,   even   for  
a

  short   time.
Electrical interference
The Keyless Entry and Starting electronic key may not operate if close to certain electronic devices: telephone, laptop computer, strong magnetic   fields,   ...
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause malfunctions.
D on't   forget   to   turn   the   steering   to   engage   the   steering   lock.
Lost keys, remote control, electronic key
Visit a CITROËN dealer with the vehicle's registration certificate, your personal identification documents and if possible, the label bearing the key   code.
The
  CITROËN   dealer   will   be   able   to   retrieve   the   key   code   and   the   transponder   code   required   to   order   a   new   key
Do
  not   throw   the   remote   control   batteries   away,   they   contain   metals   which   are   harmful   to   the   environment.
Take
  them   to   an   approved   collection   point.
When purchasing a second-hand vehicle
Have the key codes memorised by a CITROËN dealer, to ensure that the keys in your possession are the only ones which can start the vehicle.
Access

74
C4-2_en_Chap02_ouvertures_ed02-2015
Operating fault
When the ignition is switched on, fixed illumination   of   the   indicator   lamp   in   the   button  
i

ndicates   a   fault   with   the   system.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Failure of the remote control
To deactivate the monitoring functions:
F  
u
nlock   the   vehicle   using   the   key   (integral   to  
t

he
 
remote
 
control)
 
in
 
the
 
driver's
 
door
 
lock,
F
 
o
pen   the   door;   the   alarm   is   triggered,
F
 
s
witch   on   the   ignition;   the   alarm   stops;   the  
i

ndicator   lamp   in   the   button   goes   off.
Locking the vehicle without
activating the alarm
F Lock  or   deadlock   the   vehicle   using   the  k
ey(integral   to   the   remote   control)   in   the  
d

river's   door   lock.
Triggering of the alarm
This is indicated by sounding of the siren and   flashing   of   the   direction   indicators   for  
t

hirty seconds.
The
  monitoring   functions   remain   active   until  
t

he   alarm   has   been   triggered   eleven   times   in  
s

uccession.
When
  the   vehicle   is   unlocked   using   the   remote  
c

ontrol   or   the   Keyless   Entry   and   Starting  
s

ystem,   rapid   flashing   of   the   indicator   lamp  
i

n   the   button   informs   you   that   the   alarm   was  
t

riggered   during   your   absence.   When   the  
i

gnition   is   switched   on,   this   flashing   stops  
i

mmediately.
Access

91
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Stop & Start
The heating and air conditioning systems   only   work   when   the   engine   is  
r

unning.
To
  maintain   a   comfortable   temperature  
i

n   the   passenger   compartment,   you   can  
t

emporarily   deactivate   the   Stop   &   Start  
s

ystem.
For
  more   information   on   Stop   &   Start,  
r

efer   to   the   corresponding   section.
In
 
order
 
for
 
these
 
systems
 
to
 
be
 
fully
 
effective,
 
follow
 
the
 
operation
 
and
 
maintenance
 
g

uidelines
 belo

w:
F
 
T

o
 
obtain
 
an
 
even
 
air
 
distribution,
 
take
 
care
 
not
 
to
 
obstruct
 
the
 
exterior
 
air
 
intake
 
grilles
 
l

ocated at the base of the windscreen, the nozzles, the vents and the air outlets, as well
as
 
the
 
air
 
extractor
 
located
 
in
 
the
 
boot.
F
 
D

o
 
not
 
cover
 
the
 
sunshine
 
sensor,
 
located
 
on
 
the
 
dashboard;
 
this
 
is
 
used
 
for
 
regulation
 
o

f
 
the
 
air
 
conditioning
 
system.
F
 
O

perate
 
the
 
air
 
conditioning
 
system
 
for
 
at
 
least
 
5
 
to
 
10
 
minutes,
 
once
 
or
 
twice
 
a
 
month
 
t

o
 
keep
 
it
 
in
 
per fect
 
working
 
order.
F
 
E

nsure
 
that
 
the
 
passenger
 
compartment
 
filter
 
is
 
in
 
good
 
condition
 
and
 
have
 
the
 
filter
 
e

lements
 
replaced
 
regularly.
  W

e
 
recommend
 
the
 
use
 
of
 
a
 
combined
 
passenger
 
compartment
 
filter.
 
Thanks
 
to
 
its
 
s

pecial active additive, it contributes to the purification of the air breathed by the
occupants
 
and
 
the
 
cleanliness
 
of
 
the
 
passenger
 
compartment
 
(reduction
 
of
 
allergic
 
s

ymptoms,
 
bad
 
odours
 
and
 
greasy
 
deposits).
F
 
T

o
 
ensure
 
correct
 
operation
 
of
 
the
 
air
 
conditioning
 
system,
 
you
 
are
 
also
 
advised
 
to
 
have
 
i

t
 
checked
 
regularly
 
as
 
recommended
 
in
 
the
 
maintenance
 
and
 
warranty
 
guide.
F
 
I

f
 
the
 
system
 
does
 
not
 
produce
 
cold
 
air,
 
switch
 
it
 
off
 
and
 
contact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
When
 
towing
 
the
 
maximum
 
load
 
on
 
a
 
steep
 
gradient
 
in
 
high
 
temperatures,
 
switching
 
off
 
the
 a
ir
 
conditioning
 
increases
 
the
 
available
 
engine
 
power
 
and
 
so
 
improves
 
the
 
towing
 
ability. The condensation created by the air
conditioning
  results   in   a   discharge  
o

f water under the vehicle which is
per fectly   normal.
If   after   an   extended   stop   in   sunshine,  
t

he   interior   temperature   is   very  
h

igh,   first   ventilate   the   passenger  
c

ompartment   for   a   few   moments.
Put   the   air   flow   control   at   a   setting   high  
e

nough   to   quickly   change   the   air   in   the  
p

assenger
 c
ompartment.
The   air   conditioning   system   does   not  
c

ontain chlorine and does not present
any   danger   to   the   ozone   layer.
Recommendations for ventilation and air conditioning
3
Ease of use and comfort

96
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
For more information on the automatic   visibility   programme,  
r

efer   to   the   "Front   demisting   -  
d

efrosting"
 s
ection.
4. Automatic visibility programmeIf you wish, you can make a different choice f
rom   that   offered   by   the   system   by   changing  
a

  setting.   The   the   "AUTO"
 
indicator   lamps   go  
o

ff;   the   other   functions   will   still   be   controlled  
au

tomatically.
F
 
P
ressing   the   "AUTO" button returns the
system
  to   completely   automatic   operation.2. Driver's side adjustment
The driver and front passenger can each   adjust   the   temperature   to   their  
r

equirements.
F

T

urn control 2 or 3   to   the   left   or   to   the   right  
r

espectively to decrease or increase this
value.
A
 
setting
 
around   the   value   21   provides  
o

ptimum
 
comfort.   However,   depending   on   your  
r

equirements,   a   setting   between   18   and   24   is  
n

ormal.
You
 
are
 
advised   to   avoid   a   left   /   right   setting  
d

ifference
 
of   more   than   3.
3. Passenger's side adjustment
The value indicated on the display corresponds
to  a   level   of   comfort   and   not   to   a   temperature   in  
d

egrees   Celsius   or   Fahrenheit. With
  Stop   &   Start,   when   demisting   has  
b

een   activated,   the   STOP   mode   is   not  
a

vailable.For
  maximum   cooling   or   heating   of   the  
p

assenger   compartment,   it   is   possible  
t

o   exceed   the   minimum   value   14   or   the  
m

aximum   value   28.
F

T
urn control 2 or 3 to the left
until
"LO" is displayed or to the
right
  until   "HI"
 
is   displayed.
Manual operation
Ease of use and comfort

99
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Switching the system off
On stopping the engine
- W hile   the   control   screens   remain   on:   the  
f

unction   is   available.
-
 
P
ressing   the   REST button activates the
ventilation
  for   a   few   minutes.   Activation   of  
t

he   function   is   confirmed   by   the   display   of  
t

wo dashes in the control screens and four
air
  flow   level   indicator   lamps.
 L

ocking   the   vehicle   has   no   effect   on   this  
f

unction.
-
 
T
he   control   screens   go   off   at   the   end   of   this  
p

eriod.
 P

ressing   again   before   the   end   of   the   period  
i

nterrupts   off   the   ventilation   definitively:   the  
c

ontrol   screens   go   off   and   the   function   is  
n

o   longer   available. F

T
urn the air flow control to the
left until all of the indicator
lamps   go   off.
This   action   switches   off   the   air   conditioning   and  
th

e
 v
entilation.
Temperature
  related   comfort   is   no   longer  
a

ssured   but   a   slight   flow   of   air,   due   to   the  
m

ovement   of   the   vehicle,   can   still   be   felt.
F
 
M
odify   the   settings   (temperature,   air   flow  
o

r   air   distribution)   or   press   the   "AUTO"
button
  to   reactivate   the   system   with   the  
v

alues   set   before   it   was   switched   off.
Avoid
  prolonged   operation   in   interior  
a

ir   recirculation   mode   or   driving   for  
l

ong   periods   with   the   system   off   (risk   of  
m

isting   and   deterioration   of   air   quality).
This switch does not operate the air
conditioning,
  only   the   air   fan.
When the "REST" function is activated,
you
  cannot   modify   the   temperature,   air  
f

low   and   distribution   settings:   these   are  
c

ontrolled   automatically   according   to  
t

he
 a
mbient
 t
emperature.
This function is not available in the
STOP
  mode   of   Stop   &   Start.
3
Ease of use and comfort

100
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Front demist - defrost
These markings on the control panel indicate the control positions for rapid demisting or defrosting   of   the   windscreen   and   side   windows.
With manual air
conditioning
F Put  the   temperature,   air   flow   and   distribution c
ontrols   to   the   dedicated   marked   position.
F
 
P
ut   the   air   intake   control   to   the   "Exterior   air  
i

ntake"   position  
 
(

indicator   lamp   on   the   control   off).
F
 
S
witch   on   the   air   conditioning   by   pressing
 t

he "A /C "
 

button;   the   warning   lamp   in   the
 b

utton   comes   on.
With digital dual-zone air
conditioning
Automatic visibility programme
F Select  this   programme   to   demist   or   defrost  t
he windscreen and side windows as
quickly
  as   possible.
The
  system   automatically   manages   the   air  
c

onditioning,   air   flow   and   air   intake,   and  
p

rovides   optimum   distribution   towards   the  
w

indscreen   and   side   windows.
F

To stop the programme, press either the "visibility"  button   again   or   "AUTO", the
warning
  lamp   on   the   button   goes   off   and   the
 w

arning   lamp   on   the   "AUTO"
 
button   comes   on.
The system starts again with the values in use before it was overridden by the visibility
programme.
With
  Stop   &   Start,   when   demisting   has  
b

een   activated,   the   STOP   mode   is   not  
a

vailable.
With
 
Stop
 
&
 
Start,
 
when
 
the
 
demisting,
 
a

ir
 
conditioning
 
and
 
air
 
flow
 
functions
 
a

re
 
activated,
 
STOP
 
mode
 
is
 
not
 
a

vailable.
Ease of use and comfort

109
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Tall version
1. Front armrest  (
see   details   on   following   pages)
2.
1

2 V accessory socket
 (

see   details   on   following   pages)
3.
Sto

rage box
4.
C

up holder / Bottle holder
5.
S

torage pocket or START/STOP button
(depending on version)
3
Ease of use and comfort

111
C4-2_en_Chap03_ergonomie-et-confort_ed02-2015
Front armrest
Longitudinal adjustment
F To  move   for wards,   raise   the   lever.  
The   armrest   slides   for wards   to   its   stop.
F
 
T
o   stow   it,   slide   it   fully   back   and   press  
d

own   to   lock   it.
Storage
There is a storage space below the cover of the   armrest.   Depending   on   equipment,   this   can  
c

ontain   the   back-up   reader   for   the   electronic  
k

ey   of   the   Keyless   Entry   and   Starting   system.
F
 
R
aise   the   cover   fully.
Comfort
 
and
 
storage
 
system
 
for
 
the
 
driver
 
and
 
front
 
passenger.
The
 
length
 
of
 
the
 
armrest
 
cover
 
can
 
be
 
adjusted.
3
Ease of use and comfort