Citroen C4 DAG 2014.5 2.G Owner's Manual

04
249
C4-2_en_Chap13b_RT6_ed01-2014
NAVIGATION - GUIDANCE
Select:
- 
"V
isual   alert"
-
 
"Audible
  alert"
-
 
"Alert
  only   in   guidance"
-
 
"Overspeed
  alarm   only".
The
  choice   of   time   of   notification   defines  
how

  long   in   advance   that   Risk   area  
warnings

  are   given.
Select "OK"
  to   confirm   the   screen.
Select "Guidance options
"   and   confirm,  
then select "

Set parameters for risk
areas "   and   confirm.
Press N AV
 
to   display   the   "Navigation -
guidance"   menu.
These   functions   are   only   available   if   risk   areas   have   been  
downloaded

  and   installed   on   the   system.
The   detailed   procedure   for   updating   risk   area   POIs   can   be   found   at  
http://citroen.navigation.com.
Settings for risk area / danger area alerts

04
250
C4-2_en_Chap13b_RT6_ed01-2014
NAVIGATION - GUIDANCE
Adding a stage
Press N AV to   display   the  "
Navigation - guidance "
  menu.
Select "
j ourney leg and route " then
confirm.
Select "Close to"
  a   route   passing  
close

  to   the   stage   or   "Strict" for a route
passing
  through   the   stage.
Confirm
  "OK"   to   start   the   guidance,   and  
give

  a   general   indication   of   the   guidance  
route. Select "
Add a stage"   then   confirm.
The
  address   of   the   stage   is   entered   as  
a

 
destination,   by   "Enter an address",
a contact in "Directory ", or "Previous
destinations".
Organising stages
To organise stages, carry out operations 1   to   2   again,   then   select  
"

Order/delete journey legs"   and  
confirm.
Select

  and   confirm   to   save   the  
modifications. Select
  the   stage   that   you   want   to   move  
in

  the   order.
Select "Delete"
  to   delete   the   stage.

04
251
C4-2_en_Chap13b_RT6_ed01-2014
NAVIGATION - GUIDANCE
Route options
Calculation criteriaSelect "Guidance options "
  and   confirm. Select "OK"
  and   confirm   to   save   the  
modifications.
Select "

Define calculation criteria"   and  
confirm.
This

  function   allows   modification   of:
-
 
the
  guidance   criteria:   ("Fastest
route", "Shortest route",
"Distance/Time"),
-
 
the
  exclusion   criteria:   ("With tolls "
or "With Ferry"),
-
 
traffic
  avoidance:   ("Traffic info").
Press N AV
 

to   display   the  
"

Navigation - guidance "
  menu.If
  traffic   avoidance   (Traffic   info)   is   selected,   the   system   suggests  
an

  alternative   route   if   there   is   a   delay   on   the   guidance   route.

04
252
C4-2_en_Chap13b_RT6_ed01-2014
NAVIGATION - GUIDANCE
Press N AV to   display   the  "
Navigation - guidance "
  menu.
Map management
Selecting the points of interest displayed on the map
Select "Map management"   and   confirm. Select
  from   the   various   categories   the  
ones

  that   you   want   to   display   on   the  
screen.
Select "

Map details"   and   confirm. Select "Default" to have only "Filling stations, garages
"
  and  
"

Risk areas"
  appear   on   the   map   (if   installed   in   the   system).
Select "OK"
  then   confirm   and  
select

"OK"   again   then   confirm   to   save  
the

  modifications.

04
253
C4-2_en_Chap13b_RT6_ed01-2014
NAVIGATION - GUIDANCE
Select "Map management" and confirm.Select:
-
 
"
Vehicle direction
"   to   have   the   map  
follow

  the   direction   of   travel,
-  
"
North direction
"   to   keep   the   map  
always

n orth up,
-  
"
Perspective view"   to   display   a  
perspective

  view.
Select "Map orientation "
  and   confirm. The
  colour   of   the   map,   different   from   the   day   and   night   mode,   is  configured
  in   the   "SETUP"
  menu.
Map orientation
Press N AV
 
to   display   the  
"

Navigation - guidance
"   menu.
Street   names   are   visible   on   the   map   from   the   100   m   scale.

04
254
C4-2_en_Chap13b_RT6_ed01-2014
NAVIGATION - GUIDANCE
Press N AV to   display   the  "
Navigation - guidance "
  menu.
Navigation voice synthesis
Select "Guidance options "   and   confirm.
Adjusting the volume / Deactivation
Select "Set speech synthesis"   and  
confirm. Select

  the   volume   graph   and   confirm.
Select "Deactivate "   to   deactivate   voice   messages.
Select "OK"   and   press   the   dial   to  
confirm. Adjust
  the   volume   to   the   desired   level  
and

  confirm.
The
 
volume   of   messages   can   be   adjusted   during   the   transmission  
of

 
the
 
message   using   the   volume   adjustment   control.
The
 
volume   setting   of   guidance   messages   is   also   accessible   via  
the "

SETUP"   /   "
Voice synthesis"   menu.

04
255
C4-2_en_Chap13b_RT6_ed01-2014
NAVIGATION - GUIDANCE
Male voice / Female voicePress SETUP   to   display   the  
configuration

  menu.
Select "Select male voice" or "Select
female voice"
  then   confirm   "Ye s" to
activate
  a   male   or   female   voice.  
The
 
system

  restarts.
Select "Voice synthesis"
  and   confirm.

05
256
C4-2_en_Chap13b_RT6_ed01-2014
TRAFFIC INFORMATION
Access to the "TRAFFIC INFORMATION " menu
List of TMC  messages   in   order  of
  distance   from   the   vehicle.
Go
  from   the   list   to   the   menu   (left/right).
"Traffic information"
"Geographic filter "
"Select TMC station"
(automatic,
  manual)
"Display/Do not display
messages "
or
Press "TRAFFIC".

05
257
C4-2_en_Chap13b_RT6_ed01-2014
TRAFFIC INFORMATION
Configure the filtering and display of TMC messages
TMC (Traffic Message Channel) messages with GPS Navigation provide traffic information in real time.
Press the TRAFFIC  
button
 
to
 
display
 
the
 
"

Traffic information"   menu.
Select the "Geographic filter" function
and
  confirm. The
  system   offers   a   choice   of:
-
 
"
Retain all the messages",
or
-
 
"
Retain the messages"
●
 
"
Around the vehicle",
  (confirm  
the

  mileage   to   modify   and   select  
the

  distance),
●
 
"
On the route".
Confirm
  "OK"   to   save   the   modifications.
We
  recommend:
-
 
a
  filter   on   the   route   and
-
 
a
  filter   around   the   vehicle   of:
-
 
12
  miles   (20   km)   in   urban   areas,
-
 
30
  miles   (50   km)   on   motorways.

05
258
C4-2_en_Chap13b_RT6_ed01-2014
TRAFFIC INFORMATION
Principal TMC symbols
Red and yellow triangle: traffic information, for example:
Black   and   blue   triangle:   general   information,   for   example:
Weather reports
Modified
  signage
Risk
  of   explosion Traffic
  reports
Narrow   carriageway
Road
  closed
Wind
Slippery surface
Demonstration Fog
Accident
Danger
Parking
d

elay
n

o entry Snow
  /   ice
Roadworks
Traffic
  jam
Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic   report  
is

  transmitted,   the   current   audio   source   (Radio,   CD,   USB,   ...)   is  
interrupted

  automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

  the   audio   source   resumes   at   the   end   of   the   transmission   of   the  
message.Press

RADIO   to   display   the   menu.
Select "Service announcements" then
confirm.
Activate
  or   deactivate   "TA"
  then   confirm.
The
  volume   setting   for  
T
A
 
messages   can   be   adjusted   only   during   the  
transmission

  of   this   type   of   alert.
Activate
  or   deactivate   the   function   at   any   time   by   pressing  
the

  button.
During
  a   message,   press   the   button   to   interrupt   it.