engine Citroen C4 PICASSO 2015 2.G Owners Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2015, Model line: C4 PICASSO, Model: Citroen C4 PICASSO 2015 2.GPages: 420, PDF Size: 10.72 MB
Page 307 of 420

305
The petrol or Diesel engine of your vehicle is fitted  with  a  catalytic  converter,  a  device  which Â
h
elps  to  reduce  the  level  of  harmful  emissions Â
i
n  the  exhaust  gases.
For petrol engines, you must use unleaded
fuel.
The
 filler  neck  is  narrower,  allowing  only Â
u
nleaded  petrol  nozzles  to  be  introduced.
If you have put in the wrong fuel
for your vehicle, you must have the
fuel tank drained and filled with
the correct fuel before star ting the
engine.
Fuel cut- of f
Your vehicle is equipped with a safety device w hich cuts off the fuel supply in the event of a
collision.
Misfuel prevention (Diesel)*
Operation
When a petrol filler nozzle is introduced into the f uel  filler  neck  of  your  Diesel  vehicle,  it  comes Â
i
nto  contact  with  the  flap.  The  system  remains Â
c
losed  and  prevents  filling.
Do not persist but introduce a Diesel type
filler nozzle. Mechanical  device  which  prevents  filling  the  tank  of  a  Diesel  vehicle  with  petrol.  It  avoids  the  risk  of Â
e
ngine  damage  that  can  result  from  filling  with  the  wrong  fuel.
It  remains  possible  to  use  a  fuel  can  to Â
f
ill  the  tank.
In  order  to  ensure  a  good  flow  of  fuel, Â
d
o  not  place  the  nozzle  of  the  fuel  can Â
i
n  direct  contact  with  the  flap  of  the Â
m
isfuel  prevention  device  and  pour Â
s
l ow l y.
Travelling abroad
As Diesel fuel pump nozzles may b
e  different  in  other  countries,  the Â
p
resence  of  the  misfuel  prevention Â
d
evice  may  make  refuelling  impossible.
Before
 travelling  abroad,  we Â
r
ecommend  that  you  check  with  the Â
C
ITROËN  dealer  network,  whether  your Â
v
ehicle  is  suitable  for  the  fuel  pumps  in Â
t
he  country  in  which  you  want  to  travel.
*Â Depending
Â
on
Â
the
Â
country
Â
of
Â
sale.
8
Checks
Page 308 of 420

306
Fuel used for petrol engines
The petrol engines are compatible with E10  bio-petrol  (containing  10  %  ethanol), Â
c
onforming  to  European  standards  EN  228  and Â
E
N
 1
5376.
E85
 type  fuels  (containing  up  to  85  %  ethanol) Â
a
re  reserved  exclusively  for  vehicles  marketed Â
f
or  the  use  of  this  type  of  fuel  (BioFlex Â
v
ehicles).  The  quality  of  the  ethanol  must Â
c
omply  with  European  standard  EN  15293.
Fuel used for Diesel
engines
The Diesel engines are compatible with biofuels  which  conform  to  current  and  future Â
E
uropean  standards  (Diesel  fuel  which Â
c
omplies  with  standard  EN  590  mixed  with Â
a
 biofuel  which  complies  with  standard Â
E
N 14214)  available  at  the  pumps  (containing Â
u
p  to  7  %  Fatty  Acid  Methyl  Ester).
B30
 biofuel  can  be  used  in  certain  Diesel Â
e
ngines.  However,  this  use,  even  occasional, Â
r
equires strict application of the special
servicing
 conditions.  Contact  a  CITROËN Â
d
ealer  or  a  qualified  workshop.
The
 use  of  any  other  type  of  (bio)fuel Â
(
vegetable  or  animal  oils,  pure  or  diluted, Â
d
omestic  fuel...)  is  strictly  prohibited  (risk  of Â
d
amage  to  the  engine  and  fuel  system).
Checks
Page 309 of 420

307
Running out of fuel (Diesel)
On vehicles fitted with Diesel engines, the fuel system  must  be  primed  if  you  run  out  of  fuel.
For all versions other than
b
l
ueH
di
, refer to the
corresponding
 engine  compartment  view.Other HDi engines
(except BlueHDi version)
If
Â
the
Â
tank
Â
on
Â
your
Â
vehicle
Â
is
Â
fitted
Â
with
Â
a
Â
misfuel
Â
prevention
Â
device,
Â
refer
Â
to
Â
the
Â
"
Misfuel
Â
prevention
Â
(Diesel)"
Â
section.
If
Â
the
Â
engine
Â
does
Â
not
Â
start
Â
first
Â
time,
Â
d
on't
Â
keep
Â
trying
Â
but
Â
start
Â
the
Â
procedure
Â
a
gain
Â
from
Â
the
Â
beginning.
BlueHDi engines
F Fill  the  fuel  tank  with  at  least  five  litres  of  D
iesel.
F
Â
S
witch  on  the  ignition  (without  starting  the Â
e
ngine).
F
Â
W
ait  around  6  seconds  and  switch  off  the Â
ig
nition.
F
Â
R
epeat  the  operation  10  times.
F
Â
O
perate  the  starter  to  run  the  engine.F
Â
A
dd  at  least  five  litres  of  Diesel  fuel  to  the Â
t
ank.
F
Â
O
pen  the  bonnet.
F
Â
I
f  necessary,  unclip  the  styling  cover  for Â
a
ccess  to  the  priming  pump.
F
Â
S
queeze  and  release  the  priming  pump Â
r
epeatedly  until  resistance  is  felt  (there Â
m
ay  be  resistance  at  the  first  press).
F
Â
O
perate  the  starter  to  start  the  engine Â
(
if  the  engine  does  not  start  at  the  first Â
a
ttempt,  wait  around  15  seconds  before Â
t
rying
 ag
ain).
F
Â
I
f  the  engine  does  not  start  after  a  few Â
a
ttempts,  operate  the  priming  pump  again Â
t
hen  start  the  engine.
F
Â
R
efit  the  styling  cover  and  clip  it  in  place.
F
Â
C
lose  the  bonnet.
8
Checks
Page 310 of 420

308
Checking levels
Take care when working under the bonnet, as certain areas of the engine may be extremely hot (risk of burns) and the cooling fan could start at any  time  (even  with  the  ignition  off).
Engine oil level
The check is carried out either when the  ignition  is  switched  on  using  the Â
o
il  level  indicator  in  the  instrument Â
p
anel  for  vehicles  so  equipped,  or Â
u
sing  the  dipstick.Checking using the dipstick
F Locate  the  dipstick  in  the  engine  c
ompartment  of  your  vehicle.
 R
efer  to  the  "Petrol  engine"  or  "Diesel Â
eng
ine"
 se
ction.
F
Â
T
ake  the  dipstick  by  its  coloured  grip  and Â
r
emove  it  completely.
F
Â
W
ipe  the  end  of  the  dipstick  using  a  clean Â
n
on-fluffy  cloth.
F
Â
R
efit  the  dipstick  and  push  fully  down,  then Â
p
ull  it  out  again  to  make  the  visual  check: Â
t
he  correct  level  is  between  the  marks  A
and
 B.
It
Â
is
Â
normal
Â
to
Â
top
Â
up
Â
the
Â
oil
Â
level
Â
between
Â
t
wo
Â
services
Â
(or
Â
oil
Â
changes).
Â
CITROËN
Â
r
ecommends
Â
that
Â
you
Â
check
Â
the
Â
level,
Â
and
Â
top
Â
u
p
Â
if
Â
necessary,
Â
every
Â
3
Â
000
Â
miles
Â
(5
Â
000
Â
kms).
Check
Â
all
Â
of
Â
these
Â
levels
Â
regularly,
Â
in
Â
line
Â
with
Â
the
Â
manufacturer's  service  schedule.  Top  them  up  if  necessary,  unless  other wise  indicated.
If
Â
a
Â
level
Â
drops
Â
significantly,
Â
have
Â
the
Â
corresponding  system  checked  by  a  CITROËN  dealer  or  a  qualified  workshop.
To
Â
ensure
Â
that
Â
the
Â
reading
Â
is
Â
correct,
Â
y
our
Â
vehicle
Â
must
Â
be
Â
parked
Â
on
Â
a
Â
level
Â
s
ur face
Â
with
Â
the
Â
engine
Â
having
Â
been
Â
off
Â
f
or
Â
more
Â
than
Â
30
Â
minutes. A = M
aX
B
= MI
n
I
f  you  find  that  the  level  is  above  the  A  mark  or Â
belo
w the B Â mark, Â do not star t the engine.
-
Â
I
f  the  level  is  above  the  MAX
Â
mark Â
(risk
 of  damage  to  the  engine),  contact  a Â
C
ITROËN  dealer  or  a  qualified  workshop.
-
Â
I
f  the  level  is  below  the  MIN
Â
mark, Â you Â
m
ust  top  up  the  engine  oil.
Checks
Page 311 of 420

309
Topping up the engine oil level
F Locate the  oil  filler  cap  in  the  engine  c
ompartment  of  your  vehicle.
 R
efer  to  the  "Petrol  engine"  or  "Diesel Â
eng
ine"
 se
ction.
F
U
nscrew the oil filler cap to reveal the filler
aperture.
F
Â
A
dd  oil  in  small  quantities,  avoiding  any Â
s
pills  on  engine  components  (risk  of  fire).
F
Â
W
ait  a  few  minutes  before  checking  the Â
l
evel  again  using  the  dipstick.
F
Â
A
dd  more  oil  if  necessary.
F
Â
A
fter  checking  the  level,  carefully  refit  the Â
o
il  filler  cap  and  the  dipstick  in  its  tube.
Engine oil change
Refer to the manufacturer's service schedule for  details  of  the  interval  for  this  operation.
In
 order  to  maintain  the  reliability  of  the  engine Â
a
nd  emission  control  system,  never  use Â
a
dditives  in  the  engine  oil.
After
 topping  up  the  oil,  the  check  when Â
s
witching  on  the  ignition  with  the  oil Â
l
evel  indicator  in  the  instrument  panel Â
i
s  not  valid  during  the  30  minutes  after Â
t
opping  up.
Oil grade
Before topping-up the oil or changing the oil, c
heck  that  the  oil  is  the  correct  grade  for  your Â
e
ngine  and  conforms  to  the  manufacturer's Â
r
ecommendations.
8
Checks
Page 312 of 420

310
Coolant level
The coolant level should be close to  the  "MA X"  mark  but  should  never Â
e
xceed  it.
In
Â
addition,  as  the  cooling  system  is  pressurised,
 w
ait
Â
at
Â
least  one  hour  after  switching  off  the
 e
ngine
Â
before  carrying  out  any  work.
To
Â
avoid
Â
any  risk  of  scalding,  unscrew  the  cap
 b
y
Â
two
Â
turns  to  allow  the  pressure  to  drop.  When
 t
he
Â
pressure  has  dropped,  remove  the  cap  and
 t
op
Â
up
Â
the
 level.
Fluid specification
The coolant must conform to the ma nufacturer's r ecommendations.
The
Â
brake
Â
fluid
Â
level
Â
should
Â
be
Â
close
Â
t
o
Â
the
Â
"MA X"
Â
mark.
Â
If
Â
it
Â
is
Â
not,
Â
check
Â
t
he
Â
brake
Â
pad
Â
wear.
Brake fluid level
Changing the fluid
Refer to the manufacturer's service schedule f
or  details  of  the  interval  for  this  operation.
Fluid specification
The brake fluid must conform to the manufacturer's r ecommendations. The cooling fan may star t after switching
off the engine: take care with ar ticles and
clothing that might be caught by the fan
blades. When  the  engine  is  warm,  the  temperature  of Â
t
he  coolant  is  regulated  by  the  fan.
Checks
Page 314 of 420

312
Checks
12 V battery
The battery does not require any maintenance.
H owever,  check  that  the  terminals  are  clean a
nd  correctly  tightened,  particularly  in  summer
 a
nd  winter.Refer to the manufacturer's service  schedule  for  details  of  the Â
r
eplacement  intervals  for  these Â
c
omponents.
Air filter and passenger compartment filter
Replace the oil filter each time the e ngine  oil  is  changed.
Refer
 to  the  manufacturer's Â
s
ervice  schedule  for  details  of Â
t
he  replacement  interval  for  this Â
c
omponent.
Oil filter
The presence of this label, in particular with
the  Stop  &  Start  system,  indicates  the  use  of Â
a
 specific  12  V  lead-acid  battery  with  special Â
t
echnology  and  specification.  The  involvement Â
o
f  a  CITROËN  dealer  or  a  qualified  workshop Â
i
s  essential  when  replacing  or  disconnecting Â
t
he  battery.
Unless
 other wise  indicated,  check  these  components  in  accordance  with  the  manufacturer's  service  schedule  and  according  to  your  engine.
Other wise,  have  them  checked  by  a  CITROËN  dealer  or  a  qualified  workshop.
Depending on the environment (e.g. dusty a
tmosphere)  and  the  use  of  the  vehicle  (e.g.  city d
riving),
 r
eplace them twice as often if necessar y .
A
 clogged  passenger  compartment  filter  may  have
 a
n  adverse  effect  on  the  per formance  of  the  air
 c
onditioning  system  and  generate  undesirable
 o
dours.
Particle filter (Diesel)
The start of saturation of the
particle  filter  is  indicated  by  the Â
f
ixed  illumination  of  this  warning Â
l
amp  accompanied  by  a  warning Â
m
essage.
As
Â
soon  as  the  traffic  conditions  permit, Â
r
egenerate  the  filter  by  driving  at  a Â
s
peed
Â
of  at  least  40  mph  (60  km/h)  until Â
t
he
Â
warning  lamp  goes  off.
If
Â
the
Â
warning  lamp  stays  on,  this Â
i
ndicates  a  low  additive  level.
Refer
Â
to  the  "Diesel  additive  level" Â
s
ection.
on a n
ew vehicle, the first particle
filter
Â
regeneration  operations  may  be Â
a
ccompanied  by  a  "burning"  smell, Â
w
hich
Â
is  per fectly  normal.
Following
 prolonged  operation  of  the Â
v
ehicle
Â
at  very  low  speed  or  at  idle, Â
y
ou
Â
may,  in  exceptional  circumstances, Â
n
otice
Â
the  emission  of  water  vapour  at Â
t
he
Â
exhaust  on  acceleration.  This  does Â
n
ot affect the behaviour of the vehicle
or
Â
the
Â
environment.
When
Â
carrying
Â
out
Â
work
Â
on
Â
the
Â
battery,
Â
refer
Â
t
o
Â
the
Â
"12
Â
V
Â
battery"
Â
section
Â
for
Â
details
Â
of
Â
the
Â
p
recautions
Â
to
Â
be
Â
taken
Â
before
Â
disconnecting
Â
t
he
Â
battery
Â
and
Â
following
Â
its
Â
reconnection.
Checks
Page 315 of 420

313
Brake wear depends on the style of  driving,  particularly  in  the  case Â
o
f  vehicles  used  in  town,  over  short Â
d
istances.  It  may  be  necessary  to Â
h
ave
Â
the
Â
condition  of  the  brakes  checked,  even Â
b
etween
 v
ehicle
 s
ervices.
Unless
Â
there  is  a  leak  in  the  circuit,  a  drop  in Â
t
he
Â
brake
 fluid  level  indicates  that  the  brake Â
p
ads
Â
are
Â
worn.
Brake pads
For information on checking brake d isc  wear,  contact  a  CITROËN  dealer Â
o
r  a  qualified  workshop.
Brake disc wear
Only use products recommended by CITROËN  or  products  of  equivalent Â
q
uality
 an
d
 sp
ecification.
In
 order  to  optimise  the  operation  of Â
u
nits  as  important  as  those  in  the Â
b
raking  system,  CITROËN  selects  and Â
o
ffers  very  specific  products.
After
 washing  the  vehicle,  dampness, Â
o
r  in  wintry  conditions,  ice  can  form Â
o
n  the  brake  discs  and  pads:  braking Â
e
fficiency  may  be  reduced.  Make  light Â
b
rake  applications  to  dry  and  defrost Â
t
he  brakes.
Electric parking brake
For more information, refer to the "Electric parking  brake  -  Operating  faults"  section.
This
 system  does  not  require  any Â
r
outine  servicing.  However,  in  the Â
e
vent  of  a  problem,  have  the  system Â
c
hecked  by  a  CITROËN  dealer  or  a Â
q
ualified
 w
orkshop.
Manual gearbox
The gearbox does not require any m
aintenance  (no  oil  change).
Refer
 to  the  manufacturer's  service Â
s
chedule  for  the  checking  interval  for Â
t
his
 c
omponent.
Electronic gearbox
The gearbox does not require any maintenance  (no  oil  change).
Refer
 to  the  manufacturer's  service Â
s
chedule  for  details  of  the  checking Â
i
nterval  for  this  component.
Automatic gearbox
The gearbox does not require any maintenance  (no  oil  change).
Refer
 to  the  manufacturer's  service Â
s
chedule  for  details  of  the  level Â
c
hecking  interval  for  this  component.To
 avoid  damaging  the  electrical  units, Â
n
ever use  a  high  pressure  jet  wash  in Â
t
he  engine  compartment.
8
Checks
Page 316 of 420

314
AdBlue® additive and SCR system
f
or
Â
BlueHDi  Diesel  engines
To assure respect for the environment and c
onformity  with  the  new  Euro  6  emissions Â
s
tandard,  without  adversely  affecting  the Â
p
er formance  or  fuel  consumption  of  Diesel Â
e
ngines,  CITROËN  has  taken  the  decision  to Â
e
quip  its  vehicles  with  an  effective  system  that Â
a
ssociates  SCR  (Selective  Catalytic  Reduction) Â
w
ith  a  particle  filter  (FAP)  for  the  treatment  of Â
e
xhaust  gases.
Presentation of the SCR system
Using an additive called AdBlue® containing u
rea,
Â
a
Â
catalytic
Â
converter
Â
turns
Â
up  to  85% Â
o
f
Â
nitrous
Â
oxides
Â
(NOx)
Â
into
Â
nitrogen  and Â
w
ater,
Â
which
Â
are
Â
harmless
Â
to
Â
health  and  the Â
e
nvironment. The
 AdBlue
® additive is held in a special t
ank
Â
located
 under  the  boot  at  the  rear  of Â
t
he
Â
vehicle.
Â
It  has  a  capacity  of  17  litres:  this Â
p
rovides
Â
a
Â
driving  range  of  about  12  500  miles Â
(
20
Â
000
Â
km),
 after  which  an  alert  is  triggered Â
w
arning
Â
you
Â
when  the  reserve  remaining  is Â
e
nough
Â
for
Â
just  1  500  miles  (2  400  km).
During
Â
each
 scheduled  service  of  your  vehicle Â
b
y
Â
a
Â
CITROËN  dealer  or  a  qualified  workshop, Â
t
he
Â
AdBlue
® additive tank is refilled in order to a
llow
Â
normal  operation  of  the  SCR  system.
If
Â
the
Â
estimated  mileage  between  two  services Â
i
s
Â
greater
Â
than  12  500  miles  (20  000  km),  we Â
r
ecommend
 that  you  go  to  a  CITROËN  dealer Â
o
r
Â
a
Â
qualified  workshop  to  have  the  necessary Â
t
op-up
Â
carried  out. Once
 the  AdBlue
® tank is empty, a s
ystem
Â
required
 by  regulations Â
p
revents
Â
starting
Â
of  the  engine.
If the SCR
is faulty, the level of
emissions
Â
from
Â
your  vehicle  will  no Â
l
onger
Â
meet
Â
the
Â
Euro  6  standard:  you Â
v
ehicle
Â
becomes
Â
polluting.
In
Â
the
Â
event
Â
of
Â
a
Â
confirmed  fault Â
w
ith
Â
the
Â
SCR
Â
system,  you  must  go Â
t
o
Â
a
Â
CITROËN
Â
dealer  or  a  qualified Â
w
orkshop
Â
as
Â
soon  as  possible:  after Â
a
Â
running
Â
distance  of  650  miles Â
(
1Â 100
Â
km),
Â
a
Â
system  will  be  triggered Â
a
utomatically
Â
to
Â
prevent  engine  starting.
Checks
Page 317 of 420

315
Range indicators
Once the AdBlue® tank is on reserve or after d
etection
Â
of
Â
a
Â
fault  with  the  SCR  emissions Â
c
ontrol
Â
system,
Â
when  the  ignition  is  switched Â
o
n,
Â
an
Â
indicator
Â
displays  an  estimate  of  the Â
d
istance
Â
that
Â
can
Â
be  covered,  the  range,  before Â
e
ngine
Â
starting
Â
is
Â
prevented.
In
Â
the
Â
event
Â
of
Â
simultaneous  system  fault  and Â
l
ow
Â
AdBlue
® level, the shortest range figure is t
he
Â
one
Â
displayed. Range greater than 1 500 miles (2 400 km)
When
 the  ignition  is  switched  on,  no Â
i
nformation  on  range  is  displayed  automatically Â
i
n  the  instrument  panel.
With  the  type  2  instrument  panel,  pressing  this Â
b
utton  temporarily  displays  the  driving  range.
Above
 3  000  miles  (5  000  km),  the  value  is  not Â
s
pecified.
In the event of the risk of non-starting related to a lack of AdBlue®
The engine start prevention system required  by  regulations  is  activated Â
a
utomatically  once  the  AdBlue
® tank is e
m pt y.
8
Checks