Citroen C4 PICASSO 2015 2.G Owner's Manual

279
Type 1 fuse tables
Fusebox 1
Dashboard fuses
The fusebox is located in the lower dashboard (left-hand   side).
Access to the fuses
F Refer  to   the   paragraph   "Access   to   the   tools".Fuse N°
Rating Functions
F8 5 ASteering   mounted   controls
F18 20 ATouch   screen   tablet,   audio   and   navigation   system,   CD   player,  
U

SB   ports   and   auxiliary   sockets.
F16 15 AFront   12V   socket.
F15 15 ABoot   12V   socket.
F28 5 ASTART/STOP   button.
F30 15 ARear   wiper.
F27 15 AFront   screenwash   pump,   rear   screenwash   pump.
F26 15 AHorn.
F20 5 AAirbags.
F21 5 AInstrument   panel.
F19 5 ARain   and   sunshine   sensor.
F12 5 AKeyless   starting   unit.
F2 5 AManual
 h
eadlamp
 a
djustment
 c
ontrol.
7
Practical information

280
Fusebox 2Fuse N° Rating Functions
F9 15 ARear
  12V   socket.
Practical information

281
Type 2 fuse tables
Fuse N°Rating Functions
F3 3 ASTART/STOP
  button.
F6 A 15 ATouch
  screen   tablet,   audio   and   navigation   system,   CD   player,  
U

SB   ports   and   auxiliary   sockets.
F8 5 AAlarm.
F9 3 ASteering
  mounted   controls.
F19 5 AInstrument
  panel.
F24 3 ARain
  and   sunshine   sensor.
F25 5 AAirbags.
F33 3 AMemorisation
 o

f
 d
riving
 p
osition.
F34 5 AElectric
  power   steering.
F13 10 AFront
  12V   socket.
F14 10 ABoot
  12V   socket.
F16 3 AMap
  reading   lamps   in   row   1   courtesy   lamps.
F27 5 AElectronic
  gearbox   gear   selector.
F30 20 ARear
  wiper.
F38 3 AManual
 h

eadlamp
 a
djustment
 c
ontrol.
7
Practical information

282
Engine compartment fuses
An additional fusebox is fitted in front of the battery,   for   type   2.
The
 
fusebox
 
is
 
placed
 
in
 
the
 
engine
 c
ompartment
 
near
 
the
 
battery
 
(left-hand
 
side).Access to the fuses
F Unclip   the   cover,   by   pushing   the   two   red  l
atches   towards   the   rear   of   the   vehicle.
F
 
C
hange   the   fuse   (see   corresponding  
par

agraph).
F
 
W
hen   you   have   finished,   close   the   cover  
c

arefully   to   ensure   correct   sealing   of   the  
f

usebox.
Practical information

283
Fuse N°Rating Functions
F18 10 ARight
  hand   main   beam
F19 10 ALeft
  hand   main   beam.
Type 2 fuse table
Fuse N°Rating Functions
F9 30 AMotorised
 t

ailgate.
F18 25 AHi-Fi
  amplifier.
F21 3 AHands-free
  starting   reader   unit.
Type 1 fuse table
Fusebox 1
Fusebox 2Fuse N° Rating Functions
F19 30 AFront
  wiper   slow   /   fast   speed.
F20 15 AFront
  and   rear   screenwash   pump.
F21 20 AHeadlamp
  wash   pump.
7
Practical information

284
12 V battery
The battery is located under the bonnet.
F or   access   to   the   (+)   terminal:
F
 
r
elease   the   bonnet   using   the   interior   lever,  
t

hen   the   exterior   safety   catch,
F
 
r
aise   the   bonnet   and   secure   it   with   its   stay,
F

l
ift the plastic cover for access to
the
  (+)   terminal.
Access to the battery
Procedure for starting the engine using another battery or charging a discharged battery.
T he presence of this label, in particular
with
  the   Stop   &   Start   system,   indicates  
t

he   use   of   a   12   V   lead-acid   battery   with  
s

pecial
 t
echnology
 a
nd
 s
pecification;
 t

he   involvement   of   a   CITROËN   dealer  
o

r   a   qualified   workshop   is   essential  
w

hen   replacing   or   disconnecting   the  
b

attery.
After
  refitting   the   battery,   the   Stop & Start
 s

ystem   will   only   be   active   after   a
 c

ontinuous   period   of   immobilisation   of   the
 v

ehicle,   a   period   which   depends   on   the
 c

limatic   conditions   and   the   state   of   charge
 o

f   the   battery   (up   to   about   8   hours). When
  your   vehicle's   battery   is   discharged,   the  
e

ngine   can   be   started   using   a   slave   battery  
(

external   or   on   another   vehicle)   and   jump   lead  
c

ables.
Starting using another
battery
First check that the slave battery has a nominal   voltage   of   12   V   and   a   capacity  
a

t   least   equal   to   that   of   the   discharged  
b

attery.
Do
  not   try   to   start   the   engine   by  
c

onnecting   a   battery   charger.
Do
  not   disconnect   the   (+)   terminal   when  
t

he   engine   is   running.
Practical information

285
Before disconnecting the battery
Wait 2 minutes after switching off the ignition before   disconnecting   the   battery.
Close
  the   windows   and   the   doors   before  
d

isconnecting   the   battery.
Following reconnection
of the battery
Following reconnection of the battery, switch on t
he   ignition   and   wait   1   minute   before   starting   to  
p

ermit   initialisation   of   the   electronic   systems.  
H

owever,   if   problems   remain   following   this  
o

peration,   contact   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Referring
  to   the   corresponding   section,   you  
m

ust
 y
ourself
 r
einitialise
 (
depending
 o
n
 ve

rsion):
-
 
t
he   remote   control   key,
-
 
t
he   electric   blind(s),
-
 ...
F

 
R

emove
 
the
 
plastic
 
cover
 
from
 

the
 
(+)
 
terminal,
 
if
 
your
 
vehicle
 
has
 
one.
F
 
C

onnect
 
the
 
red
 
cable
 
to
 
the
 
positive
 
t

erminal
 
(+)
 
of
 
the
 
flat
 
battery
 
A
, then to the
positive
 
terminal
 
(+)
 
of
 
the
 
slave
 
battery
 
B.
F
 
C

onnect
 
one
 
end
 
of
 
the
 
green
 
or
 
black
 
c

able
 
to
 
the
 
negative
 
terminal
 
(-)
 
of
 
the
 
s

lave battery B
 
(or
 
earth
 
point
 
on
 
the
 
other
 v
ehicle).
F
 C
onnect
 t
he
 o
ther
 e
nd
 o
f
 t
he
 g
reen
 o
r
 b
lack
 
c

able to the earth point C
 
on
 
the
 
broken
 
d

own
 
vehicle
 
(or
 
on
 
the
 
engine
 
mounting).
F
 
S

tart
 
the
 
engine
 
of
 
the
 
vehicle
 
with
 
the
 
g

ood
 
battery
 
and
 
leave
 
it
 
running
 
for
 
a
 
few
 
m

inutes.
F
 
O

perate
 
the
 
starter
 
on
 
the
 
broken
 
down
 
v

ehicle
 
and
 
let
 
the
 
engine
 
run.
 I

f
 
the
 
engine
 
does
 
not
 
start
 
straight
 
away,
 
s

witch
 
off
 
the
 
ignition
 
and
 
wait
 
a
 
few
 
m

oments
 
before
 
trying
 
again.
Some
 
functions
 
are
 
not
 
available
 
if
 
the
 
b

attery
 
is
 
not
 
sufficiently
 
charged. F
 
W

ait
 
until
 
the
 
engine
 
returns
 
to
 
idle
 
then
 
d

isconnect
 
the
 
jump
 
lead
 
cables
 
in
 
the
 
r

everse
 o

rder.
F
 
R

efit
 
the
 
plastic
 
cover
 
to
 
the
 
(+)
 
terminal,
 
if
 
y

our
 
vehicle
 
has
 
one.
7
Practical information

286
The batteries contain harmful substances such   as   sulphuric   acid   and   lead.   They m

ust   be   disposed   of   in   accordance
 w

ith   regulations   and   must   not,   in   any
 c

ircumstances,   be   discarded   with   household
 w

aste.
Take
  used   remote   control   batteries   and
 v

ehicle   batteries   to   a   special   collection   point.
Protect your eyes and face before handling   the   battery.
All
  operations   on   the   battery   must   be  
c

arried   out   in   a   well   ventilated   area   and  
a

way   from   naked   flames   and   sources  
o

f   sparks,   so   as   to   avoid   the   risk   of  
e

xplosion   or   fire.
Do
  not   try   to   charge   a   frozen   battery;  
t

he   battery   must   first   be   thawed   out   to  
a

void   the   risk   of   explosion.   If   the   battery  
h

as   been   frozen,   before   charging   have  
i

t   checked   by   a   CITROËN   dealer   or   a  
q

ualified   workshop   who   will   check   that  
t

he   internal   components   have   not   been  
d

amaged   and   the   casing   is   not   cracked,  
w

hich   could   cause   a   leak   of   toxic   and  
c

orrosive   acid.
Do
  not   reverse   the   polarity   and   use   only  
a

  12   V   charger.
Do
  not   disconnect   the   terminals   while  
t

he   engine   is   running.
Do
  not   charge   the   batteries   without  
d

isconnecting   the   terminals   first.
Wash
  your   hands   after wards.
It
 
is
 
advisable
 
to
 
disconnect
 
the
 
battery
 
i

f
 
the
 
vehicle
 
is
 
to
 
be
 
left
 
unused
 
for
 
m

ore
 
than
 
one
 
month.
do n
ot push the vehicle to start the
engine
  if   you   have   an   electronic   or  
a

utomatic   gearbox.Charging the battery using
a battery charger
F Disconnect   the   battery   from   the   vehicle.
F  F ollow   the   instructions   for   use   provided   by  
t

he   manufacturer   of   the   charger.
F
 
C
onnect   the   battery   starting   with   the  
n

egative   terminal   (-).
F
 
C
heck   that   the   terminals   and   connectors  
a

re   clean.   If   they   are   covered   with   sulphate  
(

whitish   or   greenish   deposit),   remove   them  
a

nd   clean   them.
With
  Stop   &   Start,   the   battery   does   not  
h

ave   to   be   disconnected   for   charging.
Do
 
not
 
apply
 
excessive
 
force
 
on
 
the
 
t

ab
 
as
 
locking
 
will
 
not
 
be
 
possible
 
if
 
the
 
c

lamp
 
is
 
not
 
positioned
 
correctly;
 
start
 
t

he
 
procedure
 
again.
Disconnecting the (+) cable
F Raise   the   locking   tab   D fully to release the
cable t erminal c lamp E.
Reconnecting the (+) cable
F Position   the   open   clamp   E of the cable on
the   positive   post   (+)   of   the   battery.
F
 
P
ress   vertically   on   the   clamp   E to position
it
  correctly   on   the   battery.
F
 
L
ock   the   clamp   by   spreading   the  
p

ositioning   lug   and   then   lowering   the   tab   D.
Practical information

287
Exiting economy mode
These functions are reactivated automatically next   time   the   vehicle   is   driven.
F

I
n   order   to   restore   the   use   of   these  
f

unctions   immediately,   start   the   engine   and  
l

et   it   run:
-
 
f
or   less   than   ten   minutes,   to   use  
t

he   equipment   for   approximately  
f

ive minutes,
-
 
f
or   more   than   ten   minutes,   to   use   the  
e

quipment   for   up   to   approximately  
t

hirty
 m
inutes.
Let
  the   engine   run   for   the   duration   specified   to  
e

nsure   that   the   battery   charge   is   sufficient.
Do
  not   repeatedly   and   continuously   restart   the  
e

ngine   in   order   to   charge   the   battery.
A
  flat   battery   prevents   the   engine   from   starting  
(

refer   to   the   "Battery"   section).
Load reduction mode
System which manages the use of certain functions   according   to   the   level   of   charge  
r

emaining   in   the   battery.
When
  the   vehicle   is   being   driven,   the   load  
r

eduction   function   temporarily   deactivates  
c

ertain   functions,   such   as   the   air   conditioning,  
t

he   heated   rear   screen...
The
  deactivated   functions   are   reactivated  
a

utomatically   as   soon   as   conditions   permit.
Energy economy mode
Switching to economy mode
A message then appears in the instrument p
anel   screen   indicating   that   the   vehicle   has  
s

witched   to   economy   mode   and   the   active  
f

unctions   are   put   on   standby.
If
  a   telephone   call   is   being   made   at   this   time,  
i

t will   be   maintained   for   around   10   minutes  
w

ith   the   Bluetooth   hands-free   system   of   your  
a

udio system.
System
  which   manages   the   duration   of   use   of  
c

ertain functions to conserve a sufficient level
of   charge   in   the   battery.
After   the   engine   has   stopped,   you   can  
s

till   use   functions   such   as   the   audio   and  
t

elematics   system,   windscreen   wipers,   dipped  
b

eam   headlamps,   courtesy   lamps,   etc.   for  
a

  maximum   combined   duration   of   about  
f

orty
 m
inutes.
7
Practical information

288
Changing a wiper blade
Before removing a front
wiper blade
F Within  one   minute   after   switching   off  t
he   ignition,   operate   the   wiper   stalk   to  
p

osition   the   wiper   blades   vertically   on   the  
w

indscreen,


or
F
 
F
rom   one   minute   after   switching   off   the  
i

gnition,   reposition   the   arms   manually.
Removing
F Raise  the   corresponding   wiper   arm.
F  U nclip   the   wiper   blade   and   remove   it.
Fitting
F Put  the   corresponding   new   wiper   blade   in  p
lace   and   clip   it.
F
 
F
old   down   the   wiper   arm   carefully.
After fitting a front wiper
blade
F Switch  on   the   ignition.
F  O perate   the   wiper   stalk   again   to   park   the  
w

iper   blades.
Replacement
  of   the   arms   must   be   done  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Practical information