Citroen C4 PICASSO 2016 2.G Owner's Manual

149
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Memorising speeds
Memorising
This function allows speeds to be saved, which can then be offered to set the two systems: the speed limiter (to limit the speed of the vehicle) or the c
ruise   control   (for   a   vehicle   cruising   speed).
You
  can   memorise   up   to   six   speed   settings   for   each   of   the   two   systems.   By   default,   some   speed   settings   are   already   memorised.
F

S
elect the system for which you want to
memorise
  new   speed   settings.
This function is accessible in the Driving
menu
of
  the   touch   screen   tablet.
F

Sel
ect the " Driving assistance " tab, then
Speed settings .
F
 
P
ress   the   button   corresponding   to   the  
s

peed   setting   you   want   to   modify.
As a safety measure, the driver must
carry out these operations when
stationary.
F
 
E
nter   the   new   value   using   the   numerical  
k

eypad   and   confirm.
4
Driving

150
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Speed limit recognition
This system allows the speed limit detected by
the camera to be displayed in the instrument
panel.
Specific speed limits, such as those for heavy
goods
  vehicles,   are   not   displayed.
The display of the speed limit in the instrument
panel
  is   updated   as   you   pass   a   speed   limit   sign  
i

ntended   for   cars   (light   vehicles).
The units for the speed limits (mph or
km/h)
  depend   on   the   country   you   are  
d

riving   in.
It
  should   be   taken   into   account   so   that  
y

ou   observe   the   speed   limit.
For the system to operate correctly
when
  you   change   country,   the   units   for  
s

peed in the instrument panel must be
those
  for   the   country   you   are   driving   in. The
  automatic   reading   of   road   signs   is   a  
d

riving   assistance   system   and   does   not  
a

lways   display   speed   limits   correctly.
The
  speed   limit   signs   present   on   the  
r

oad   always   take   priority   over   the  
d

isplay   by   the   system.
The system cannot in any
circumstances replace the need for
vigilance
  on   the   part   of   the   driver.
The
  driver   must   observe   the   driving  
r

egulations   and   must   adapt   the   speed  
o

f the vehicle to suit the weather and
traffic.
It is possible for the system to not
display the speed limit if it does not
detect
  a   speed   limit   sign   within   a   preset  
p

eriod.
The
  system   is   designed   to   detect   signs  
t

hat conform to the Vienna Convention
on
  road   signs.
To maintain correct operation of the
system:
  regularly   clean   the   area   in   front  
o

f   the   camera.Principles
Using a camera at the top of the windscreen, this system detects and reads speed limit and
end
  of   speed   limit   signs.
The
  system   also   takes   account   of   information  
o

n   speed   limits   from   the   navigation   system  
ma

pping.
Driving

151
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Display in the instrument panel
1. Indication  of   the   speed   limit.
or
2.
 I

ndication   of   the   end   of   the   speed   limit.
Display of the speed
The system is active but is not detecting speed limit in formation.
On detection of speed limit information, the
system
  displays   the   value. The
  driver   can,   if   desired,   adjust   the  s
peed   of   the   vehicle   according   to   the  
i

nformation   given   by   the   system.
The system is activated or deactivated in the
Driving
 

menu   of   the   touch   screen   tablet.
Select the " Settings" tab, then " Driving aids "
and " Recommended speed display ".
Activation / Deactivation
It is necessary to update your
navigation
  mapping   regularly   in   order   to  
r

eceive accurate information on speed
limits
  from   the   system.
4
Driving

152
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Memorising the speed setting
This memorisation is in addition to the display
of Speed limit recognition .
The driver can choose to adapt the speed
setting
  to   the   speed   limit   suggested,   by  
p

ressing   the   memorisation   button   at   the   speed  
l

imiter controls, with the standard cruise
control, the dynamic cruise control or the
dynamic
  cruise   control   with   Stop   function.
This
  speed   setting   then   replaces   the   previous  
s

peed  
s
etting  
f
or  
t
he  
s
peed  
l
imiter  
a
nd/or  
c
ruise  
c

ontrol. For more information on the Speed
limiter, Cruise control , Dynamic
cruise control or Dynamic cruise
control with Stop function , refer to
the
  corresponding   sections.
Steering mounted controls
1. Select  speed   limiter/cruise   control   mode.
2. M emorise   a   speed   setting.
Operating limits
The legislation on speed limits is specific to each   country.
The
  system   does   not   take   account   of   reduced  
s

peed   limits   in   the   following   cases:
-

p
oor weather (rain, snow),
-
a

tmospheric pollution,
-

t
railer, caravan,
-
 
d
riving   with   a   space-saver   type   spare  
w

heel or snow chains fitted,
-
 
p
uncture   repair   using   the   temporary  
r

epair kit,
-
 y

oung
 d
rivers,
-
 ...
T

he   system   may   be   disrupted   or   not   work   at   all  
i

n   the   following   situations:
-
 
p
oor   visibility   (inadequate   street   lighting,  
f

alling   snow,   rain,   fog),
-

w
indscreen area ahead of the camera dirty,
misty,
  frosty,   covered   with   snow,   damaged  
o

r   masked   by   a   sticker,
-

f
ault with the camera,
-
 
o
bsolete   or   incorrect   mapping,
-
 
h
idden   road   signs   (other   vehicles,  
v

egetation,
 s
now),
-
 
s
peed   limit   signs   that   do   not   conform   to   the  
s

tandard,   are   damaged   or   distorted.
Display in the instrument panel
3. Speed  limiter   indication.
4. M emorise   the   speed.
5.
 C

urrent   speed   setting.
Driving

153
C4-Picasso-II_en_Chap04_conduite_ed01-2016
F Make  an   initial press on this
button   to   request   saving   of   the  
s

peed
 s
uggested.
F

P
ress this button again to
confirm and save the new speed
setting.
Memorising the speed
F Switch   on   the   speed   limiter/cruise   control.
Speed   limiter/cruise   control   information   is  
d

isplayed.
On
  detection   of   a   speed   limit   sign,   the   system  
d

isplays the speed limit value and offers to
make
  it   a   new   speed   setting.
" MEM "
  flashes   in   the   screen   for   a   few   seconds.
If
  the   difference   between   the   speed   setting
 a

nd   speed   displayed   by   the   recognition
 s

ystem   is   less   than   6   mph   (10   km/h),   the
 M

EM
 
symbol   is   not   displayed.After a predetermined period, the screen
returns
  to   the   current   display.
4
Driving

154
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Steering mounted controls
6. Speed  limiter   on   /   pause   indication.
7. S peed   limiter   mode   selection   indication.
8.
 S

peed   limiter   setting.
Speed limiter - "LIMIT"
System which prevents the vehicle from exceeding the speed programmed by the driver.
The speed limiter cannot, in any
circumstances, replace the need to
observe speed limits, nor can it replace the
need
  for   vigilance   on   the   part   of   the   driver.
Once the programmed speed limit is reached, additional pressure on the accelerator pedal
has
  no   effect.
1.
 S

elect   speed   limiter   mode.
2.
 L

ower   programmed   speed.
3.
 R

aise   programmed   speed.
4.
 S

peed   limiter   on   /   pause.
5.
D

isplay the list of memorised speeds or,
 D

isplay   the   list   of   memorised   speeds.Displays in the instrument panel
Switching on the speed limiter requires
a   programmed   speed   of   at   least   20   mph  
(

30 km/h).
The speed limiter is paused by operation of the
control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease the accelerator pedal until the vehicle
returns
  to   the   programmed   speed   limit.
The
  programmed   speed   remains   in   the
 m

emory   when   the   ignition   is   switched   off.For more information on Memorising speeds ,
refer
  to   the   corresponding   section.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s

ection.
Driving

155
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Switching on / Pause
F Turn thumbwheel 1 to the "LIMIT" position:  t
he speed limiter mode is selected but is
not
  switched   on   (Pause).
F
 
S
witch   the   speed   limiter   back   on   by  
p

ressing   button   4, if the speed displayed
is suitable (by default, the last speed
programmed).
F

Y
ou can temporarily stop the speed limiter
by
  pressing   button   4   again:   the   display  
c

onfirms   that   it   has   been   stopped   (Pause).You do not have to switch the speed limiter on
in
  order   to   set   the   speed.
Once the function is selected, you can modify
the
  speed   setting   by:
-
 
u
sing   buttons   2 and 3,
  raising   or   lowering  
t

he   speed   displayed   :
F

b
y successive short presses, to modify
by
  +   or   -   1   mph   (km/h),
F

b
y a maintained press, to modify in steps
of
  +   or   -   5   mph   (km/h).
Adjusting the speed limiter
setting
- pressing  button   5:
F  t he   six   speeds   memorised   are   displayed  
i

n the touch screen tablet,
F
 
p
ress   the   button   corresponding   to   the  
l

imit   speed   chosen.
The
  value   is   displayed   in   the   instrument   panel.
The selection screen closes after a few
moments.
-
 
b
y   pressing   button   5, if your vehicle has
speed
  limit   recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again
  to   save   the   speed.
The value is then displayed in the instrument
panel.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s

ection.
4
Driving

156
C4-Picasso-II_en_Chap04_conduite_ed01-2016
On sharp acceleration, as when
descending  a   steep   hill,   the   speed  
l

imiter will not be able to prevent
the
  vehicle   from   exceeding   the  
pro

grammed
 s
peed.
The limiter is temporarily deactivated
and
  the   displayed   programmed   speed  
f

lashes.
An
  audible   signal   accompanies   the  
f

lashing   of   the   programmed   speed  
w

hen   exceeding   the   speed   is   not   due   to  
a

n   action   by   the   driver.
The use of mats not approved by
CITROËN may inter fere with the
operation
  of   the   speed   limiter.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-

e
nsure that the mat is secured
c o r r e c t l y,
-
 
d
o   not   fit   one   mat   on   top   of   another.
Flashing
 
of
 
the
 
dashes
 
indicates
 
a
 
fault
 
with
 
the
 sp
eed l
imiter.
Have
 
it
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
Operating fault
F Press f irmly on the accelerator pedal,
going   beyond   the   point of resistance, to
exceed
  the   programmed   speed   limit.
The speed limiter is deactivated temporarily
and
  the   displayed   programmed   speed   flashes.
An
  audible   signal   accompanies   the   flashing  
o

f   the   programmed   speed   when   exceeding  
t

he speed is not due to an action by the driver
(steep
 h

ill...).
As
  soon   as   the   vehicle's   speed   returns   to   the  
p

rogrammed   value,   the   limiter   operates   again:  
t

he   display   of   the   programmed   speed   becomes  
s

teady   again.
Switching off Temporarily exceeding the
programmed speed
F Turn the thumbwheel 1 to the "0" p osition. T
he display of speed limiter information
disappears.
Driving

157
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Steering mounted controls
6. Cruise  control   pause   /   resume   indication.
7. C ruise   control   mode   selection   indication.
8.
 Spe

ed
 s
etting.
Cruise control - "CRUISE"
System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal.
The cruise control system cannot, in any circumstances, replace the need to observe speed limits, nor can it replace the need for vigilance on the part of the driver.
Y ou   are   advised   to   keep   your   feet   near   the   pedals   at   all   times.
Switching on the cruise control requires a
minimum   vehicle   speed   of   25   mph   (40   km/h).
As
  well   as   engagement   of:
-
 
f
ourth   gear   or   higher   on   a   manual   gearbox,
-
 
s
econd   gear   or   higher   in   manual   mode   on  
a

n   automatic   gearbox,
-
position D
  on   an   automatic   gearbox.
The
  system   remains   active   after   changing   gear  
o

n   vehicles   with   a   manual   gearbox   and  
Stop
  &   Start.
The cruise control is paused
 

by   pressing  
b

utton 4   or   the   brake   pedal   or   on   triggering   of  
t

he   ESC   system   for   safety   reasons.
It
  is   possible   to   exceed   the   programmed   speed  
t

emporarily   by   pressing   the   accelerator   pedal.
To
  return   to   the   programmed   speed,   simply  
r

elease the accelerator pedal until the
programmed
  cruise   speed   is   reached   again.1.
 S

elect   cruise   control   mode.
2.
S

et the current speed of the vehicle
as
  the   programmed   speed   /   Lower   the  
pro

grammed
 s
peed.
3.
S

et the current speed of the vehicle
as
  the   programmed   speed   /   Raise   the  
pro

grammed
 s
peed.
4.
 P

ause   /   resume   cruise   control.
5.
D

isplay the list of memorised speeds or,
 A

ccept   the   speed   suggested   by   the   speed  
l

imit   recognition   system.Displays in the instrument panel
Switching off the ignition cancels any programmed   speed   value. For more information on Memorising speeds
,
refer   to   the   corresponding   section.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s
ection.
4
Driving

158
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Exceeding the programmed
speed
If the cruise speed setting is exceeded, the displayed   speed   flashes.
The
  display   becomes   steady   again   once   the  
v

ehicle   returns   to   the   cruise   speed   setting.
Switching off
F Turn thumbwheel 1 to the "0" p osition. T
he display of information related to the
cruise
  control   disappears.
Switching on
Once the cruise control is switched on, you
can  modify   the   cruising   speed   in   one   of   the  
f

ollowing
 w
ays:
-
 
u
sing   buttons   2 or 3:
F

b
y successive short presses, to modify
the
  speed   by   +   or   -   1   mph   (km/h),
F
 
b
y   a   long   press,   to   modify   the   speed   in  
s

teps   of   +   or   -   5   mph   (km/h),
-
 
b
y   pressing   button   5:
F
 
t
he   six   memorised   speeds   are   displayed  
i

n the touch screen tablet,
F
 
c
hoose   a   value:   it   is   displayed   in   the  
in

strument
 pan
el.
The selection screen closes after a few
moments.
The
  modification   is   then   accepted.
F

T

urn thumbwheel 1 to the "CRUISE"

position:
 
the
 
cruise
 
control
 
mode
 
is
 s
elected
 
but
 
is
 
paused.
F
P
ress button 2 or 3 :
 
your
 
vehicle's
 
current
 
s

peed
 
becomes
 
the
 
cruise
 
speed.
The
 
cruise
 
control
 
is
 
activated
 
(ON).
Modification of the cruise speed
(speed setting)
- by   pressing   button   5, if your vehicle has
speed   limit   recognition:
F

t
he speed to memorise is displayed in
the instrument panel,
F
press button 5 again
  to   save   the   speed.
The value is then displayed in the instrument
panel.
For more information on Speed limit
recognition and memorisation, refer to the
corresponding
 s

ection.
Pause
You can pause the cruise control at any time
by  pressing   button   4:
  the   screen   confirms   the  
pa

use.
Driving