Citroen C5 2000 (DC/DE) / 1.G Owner's Manual

Downloaded from www.Manualslib.com manuals search engine ENGINE
98
EXHAUST SPECIFICATIONS
Engine : XFX
Tightening torques (m.daN)
(10)Collars 2.5 ± 0.3
Repair
Respect the precautions to be taken when operating on
a vehicle.
The flexible pipe must not come into contact with corrosive
products.
Do not distort the flexible pipe by more than20°angular
(X),20mmaxial, 25 mmshear (Y)(flexible pipe not
fitted).
Do not distort the flexible pipe by more than 3°angular
(X), 0 mmaxial, 3 mmshear(Y)(flexible pipe in place).
WARNING : Non-respect for these precautions will result
in a reduction in the lifetime of the flexible pipe. It is thus
essential to disconnect or remove the exhaust line in any
operation necessitating the lifting of the power unit..
Oxygen sensor
EngineUpstream
Downstr. Downstr. Upstream Pre-catalyser Pre-catalyser Flexible Catal. conv. Rear
Rear (1) Rear (2) Front (3) Front (4) Rear (5) Front (6) Pipe (7) (8) Silencer (9)
XFXA 258 040 232 TR PSA K 160 TR PSA K 159 TRPSAK 175 PSA 4143
Tightening5 ± 1 m.daN 3.3±0.5 m.daN 3.3±0.5mdaN
B1JP02MDB1JP02JC

Downloaded from www.Manualslib.com manuals search engine ENGINE
99
EXHAUST SPECIFICATIONS
Engines : RHY- RHZ
Tightening torques (m.daN)
(2) Collars2.5 ± 0.3
Repair
Respect the precautions to be taken when operating
on a vehicle.
The flexible pipe must not come into contact with
corrosive products.
Do not distort the flexible pipe by more than20°
angular (X), 20mmaxial, 25 mmshear (Y)
(flexible pipe not fitted).
Do not distort the flexible pipe by more than 3°
angular(X), 0 mmaxial, 3 mmshear
(Y)(flexible pipe in place).
WARNING :Non-respect for these precautions will
result in a reduction in the lifetime of the flexible
pipe. It is thus essential to disconnect or remove
the exhaust line in any operation necessitating the
lifting of the power unit.
Engines Front pipe (1) Catalytic converter (3) Rear silencer (4)
RHY - RHZ Flexible PSA K 185 PSA 4157
B1JP02HDB1JP02JC

Downloaded from www.Manualslib.com manuals search engine ENGINE
100
EXHAUST SPECIFICATIONS
Engine : 4HX
Tightening torques (m.daN)
(2) Collars 2.5 ± 0.3
Repair
Respect the precautions to be taken when
operating on a vehicle.
The flexible pipe must not come into contact
with corrosive products.
Do not distort the flexible pipe by more than20°
angular (X), 20mm axial, 25 mmshear (Y)
(flexible pipe not fitted).
Do not distort the flexible pipe by more than 3°
angular (X),0 mmaxial, 3 mmshear
(Y)(flexible pipe in place).
WARNING :Non-respect for these precautions
will result in a reduction in the lifetime of the
flexible pipe. It is thus essential to disconnect or
remove the exhaust line in any operation neces-
sitating the lifting of the power unit.
Engine Front pipe (1) Pre-catalyser (3) Particle filter (4) Rear silencer (5)
4HX Flexible PSA K 186 PSA F 002 PSA 4158

Downloaded from www.Manualslib.com manuals search engine ENGINE
101
6FZ RFN RLZ RHY RHZ
8.8 - 9.3 (*) 8.8
21dm
2
1.4 bar
89°C 83°C
1x250W (1-speed) 1x350 W (2-speed)
91°C 97°C
105°C
11 8 ° C
6 mn (Max.)
(*) = With automatic gearbox
COOLING SYSTEM SPECIFICATIONS
Engines : 6FZ – RFN - RLZ - RHY - RHZVehicle without air conditioning
Engine plate
Capacity
Radiator surface
Pressurisation
Opening of thermostatic
regulator
Cooling fan
1st speed
2nd speed
Warning
Post-cooling1.8i 16V
2.0i 16V
3.0i 16V 2.0 HDi

Downloaded from www.Manualslib.com manuals search engine 6FZ RFN RLZ XFX RHY RHZ 4HX
8.8 - 9.3 (*) 8.8 14 10.7 (*)
27 dm
221 dm2
1.4 bar
89°C 78°C 89°C
1x500 W 3-speed
1 = 97°C 10 Bars
2 = 101°C 17 Bars
3 = 105°C 22 Bars
11 5 ° C 11 2 ° C 11 5 ° C
11 8 ° C
6 minutes (Max.)
ENGINE
102
COOLING SYSTEM SPECIFICATIONS
Engines : 6FZ - RFN - RLZ - XFX - RHY - RHZ - 4HXVehicle with air conditioning
Engine plate
Capacity
Radiator surface
Pressurisation
Opening of thermostatic
regulator
Cooling fan
1st speed
2nd speed
3rd speed
Aircon cut-out
Warning
Post-cooling1.8i 16V
2.0i 16V 2.0 HPi
3.0i 16V 2.0 HDi 2.2 HDi
(*) = With automatic gearbox

Downloaded from www.Manualslib.com manuals search engine ENGINE
103
COOLING SYSTEM SPECIFICATIONS
Engines : 6FZ - RFN
(1) Venting chamber.
(2) Water pump.
(3)Heater matrix.
(4)Bleed screw, heater matrix.
(5) Drain screw, cylinder cover.
(6)Water outlet housing.
(7)Bleed screw, water outlet housing.
(8)Drain screw, cooling radiator.
(9) Plug, cooling radiator.
(10)Cooling radiator.
Thermostat tightening : 1.7 ± 0.2 m.daN
B1GP08VP

Downloaded from www.Manualslib.com manuals search engine ENGINE
104
COOLING SYSTEM SPECIFICATIONS
Engine : RLZ
(1) Venting chamber
(2) Water pump
(3)Heater matrix
(4).Bleed screw, heater matrix
(5)Drain screw, cylinder block
(6) Coolant outlet housing
(7) Bleed screw, coolant outlet housing
(8) Bleed screw, top hose.
(9) Cooling radiator.
(10) Drain screw, cooling radiator
(11)Drain screw, cooling radiator.
Thermostat tightening : 1.7 ± 0.2m.daN
B1GP08JP

Downloaded from www.Manualslib.com manuals search engine ENGINE
105
COOLING SYSTEM SPECIFICATIONS
Engine : XFX
(1)Heater matrix
(2)Venting chamber
(3) Thermostat.
(4) Coolant outlet housing
(5) Coolant inlet housing
(6) Engine cooling radiator
(7) Venting chamber
(8) Bleed screw
(9) Water / oil exchanger
(10) Thermostat
(11) Thermostat(Coolant outlet housing)
(12) Thermal switch
(10). (11)and (12): Tightening 1.7 ± 0.4 m.daN
B1GP041P

Downloaded from www.Manualslib.com manuals search engine ENGINE
106
COOLING SYSTEM SPECIFICATIONS
Engines : RHY-RHZ
(1) Venting chamber
(2) Heater matrix
(3) Coolant inlet housing
(4)Exhaust gas / coolant heat exchanger
(5)Bleed screw
(6)Cylinder block drain plug
(7) Coolant outlet housing
(8) Additional heating (Option or according to version)
(9) Radiator
(10) Coolant / oil heat exchanger
B1GP08EP

Downloaded from www.Manualslib.com manuals search engine ENGINE
107
COOLING SYSTEM SPECIFICATIONS
Engine : 4HX
(10)Heater matrix
(2) Coolant inlet housing.
(3) Exhaust gas / coolant heat exchanger
(4) Bleed screw
(5)Coolant outlet housing.
(6)Additional heating (Option or according to version)
(7) Radiator
(8)Air / coolant heat exchanger
(9) Coolant / oil heat exchanger
(10) Venting chamber
B1GP08HP