engine Citroen DS3 2014 1.G Owner's Guide

93
DS3_en_Chap04_confort_ed01-2014
Rear screen demist - defrost
The control button is located on the heating or air conditioning system control panel.
Switching on
The rear screen demisting/defrosting can only operate   when   the   engine   is   running.
F
 
P
ress   this   button   to   demist /defrost   the  
r

ear   screen   and   (depending   on   version)  
t

he   door   mirrors.   The   indicator   lamp  
a

ssociated   with   the   button   comes   on.
Switching off
The demisting/defrosting switches off automatically   to   prevent   an   excessive  
c

onsumption   of   current.
F
 
I
t   is   possible   to   stop   the   demisting/
defrosting
  operation   before   it   is   switched  
o

ff   automatically   by   pressing   the   button  
a

gain.   The   indicator   lamp   associated   with  
t

he   button   switches   off. F
 
S
witch   off   the   demisting/defrosting  
o

f   the   rear   screen   and   door   mirrors  
a

s soon as appropriate as lower
current
  consumption   results   in  
r

educed
 f
uel
 c
onsumption.If the engine is switched off before the demisting/defrosting   is   switched   off a

utomatically,
 d
emisting/defrosting
 w
ill
 r

esume   next   time   the   engine   is   switched   on.
comfort

107
DS3_en_Chap06_conduite_ed01-2014
6-speed manual gearbox
F Move  the   lever   fully   to   the   right   to   engage  5th or 6th ge a r.
Engaging 5th or 6th gear
as a safety precaution and to facilitate
starting
  of   the   engine:
-

a
lways select neutral,
-
 
p
ress   the   clutch   pedal.Only engage reverse gear when the vehicle   is   stationary   with   the   engine   at   idle.
Engaging reverse gear
F Raise  the   ring   under   the   knob   and   move  t
he   gear   lever   to   the   left   then   for wards.
Failure
 
to
 
follow
 
this
 
advice
 
may
 
cause
 
p

ermanent
 
damage
 
to
 
the
 
gearbox
 
(

engagement
 o

f
 3rd or 4th gear by m
i st a ke).
driving

DS3_en_Chap06_conduite_ed01-2014
Electronic gearbox
R. Reverse
F  W ith   your   foot   on   the   brake,   move   the   lever  
f

or wards   to   select   this   position.
N.
 
N
eutral.
F
 
W
ith   your   foot   on   the   brake,   select   this  
p

osition   to   start   the   engine.
A.

A
utomated   mode.
F
 
M
ove   the   lever   backwards   to   select   this  
m

ode.
M + / -.
   
M
anual   mode   with   sequential   gear  
c

hanging.
F
 
M
ove   the   lever   backwards,   then   to   the   left  
t

o   select   this   mode,   then:
-
 
p
ush   for wards   to   change   up   a   gear,
-
 
o
r   push   backwards   to   change   down   a   gear.
Gear lever
+. Paddle  to   the   right   of   the   steering   wheel   for  c
hanging u p.
F
 
P
ress   the   back   of   the   steering   mounted   "+"
paddle
  to   change   up   a   gear.
-.
 P

addle   to   the   left   of   the   steering   wheel   for  
c

hanging
 d
own.
F
 
P
ress   the   back   of   the   steering   mounted   "-"
paddle
  to   change   down   a   gear.
Steering mounted controls
The steering mounted paddles do not allow neutral to be selected, reverse
gear
  to   be   engaged   or   disengaged,   or  
t

he   driving   mode   to   be   changed.
Five
 
or
 
six-speed
 
electronically
 
controlled
 
g

earbox
 
which
 
offers
 
a
 
choice
 
between
 
the
 
c

omfort
 
of
 
automated
 
operation
 
or
 
the
 
pleasure
 
o

f
 m

anual
 g

ear
 c

hanging.
Two
 
driving
 
modes
 
are
 
offered:
-

a

utomated
 

mode
 
for
 
automatic
 
control
 
o

f
 
the
 
gears
 
by
 
the
 
gearbox,
 
without
 
any
 
a

ction by the driver,
-

m

anual
 

mode
 
for
 
the
 
sequential
 
changing
 
o

f
 
the
 
gears
 
by
 
the
 
driver,
 
using
 
the
 
gear
 
l

ever
 
or
 
the
 
steering
 
mounted
 
control
 
p

addles.
In
 
automated
 
mode,
 
you
 
can
 
temporarily
 
take
 
c

ontrol
 
of
 
gear
 
changes
 
at
 
any
 
time,
 
using
 
the
 
s

teering
 
mounted
 
control
 
paddles.

109
DS3_en_Chap06_conduite_ed01-2014
display in the instrument panel
Gear lever positions
N. Neutral
R. Reverse
1 2 3 4 5 / 6.  Gears   in   manual   mode.
AUTO.
  T

his   comes   on   when   automated   mode  
i

s   selected.   It   goes   off   when   changing  
t

o   manual   mode.
F

P
lace your foot on the brake
when
  this   warning   lamp   flashes  
(

e.g.:   starting   the   engine).You
  must   keep   your   foot   on   the   brake  
p

edal   while   starting   the   engine.
Moving off
F Select position N
.
F  P ress   the   brake   pedal   fully.
F
 
S
tart   the   engine.
N
  appears   in   the   instrument   panel.
N
  flashes   in   the   instrument   panel  
s

creen   if   the   gear   lever   is   not   in  
p

osition

N   when   starting.
F
 
S
elect   automated   mode   (position   A),
manual
  mode   (position   M) or reverse
(position R ).
AUTO and 1, 1 or R appear in the
instrument
 pan

el.
F
 
R
elease   the   parking   brake.
F
 
P
rogressively   take   your   foot   off   the   brake  
ped

al. Depending
  on   the   type   of   electronic  
g

earbox,   the   vehicle   may   move   off   on  
i

ts   own   (refer   to   the   paragraph  
"Creep
  function").
Do
  not   press   the   brake   and   clutch  
p

edals   simultaneously.   This   can   cause  
r

apid   clutch   wear.
F
 
A
ccelerate   away.
driving

DS3_en_Chap06_conduite_ed01-2014
creep function
(depending on equipment)
This function allows the vehicle to be
manoeuvred  more   easily   at   low   speeds  
(when
  parking,   in   traffic   jams...).
With
  the   gear   lever   in   position   A, M or R , the
vehicle moves as soon as you take your
foot off the brake pedal , at low speed and
with
  the   engine   at   idle.
Automated mode
AUTO and   the   gear   engaged   appear  i
n   the   instrument   panel.
The
 
gearbox   then   operates   in   auto-adaptive  
m

ode,
 
without   any   action   on   the   part   of   the  
d

river.
 
It
 
continuously   selects   the   most   suitable  
g

ear
 
taking   account   of:
-
 
o

ptimisation   of   fuel   consumption,
-
 
d

riving   style,
-

r

oad conditions,
-
 
v

ehicle   load.
For
 
optimum   acceleration,   when   overtaking  
a

nother
 
vehicle   for   example,   press   the  
a

ccelerator pedal fully down, beyond the point
of
 
resistance. You
  can   change   mode   at   any   time   by  
m

oving   the   gear   lever   from   A to M or
the
  other   way   round.
The
 
creep
 
function
 
may
 
be
 
temporarily
 
u

navailable
 
if
 
the
 
clutch
 
temperature
 
is
 
t

oo
 
high
 
or
 
the
 
slope
 
too
 
steep.
Do not leave children unsupervised
inside
 
the
 
vehicle
 
when
 
the
 
engine
 
is
 
r

unning. F

Sel

ect position A
.
Never select neutral (position N ) when
moving.
Temporary control of gear
changing
You can temporarily take over control of gear c hanges   using   the   steering   mounted   "+" and
"-"
 

control   paddles:   if   the   engine   speed   allows,  
t

he   gear   change   is   carried   out.
This function allows you to anticipate certain
situations
 
s
uch  
a
s  
ov
ertaking  
a
nother  
v
ehicle  
o
r  
a

pproaching   a   bend.
After
  a   few   moments   without   any   action   on   the  
p

addles,   the   gearbox   resumes   control   of   gear  
c

hanging
 a
utomatically.

111
DS3_en_Chap06_conduite_ed01-2014
The gear change requests are only carried out if   the   engine   speed   permits.
It is not necessary to release the accelerator
pedal
  during   gear   changes.
When
  braking   or   slowing   down,   the   gearbox  
c

hanges   down   automatically   so   that   the   vehicle  
p

icks   up   in   the   right   gear.
Under
  full   acceleration,   the   change   up   will  
n

ot   take   place   unless   the   driver   operates   the  
g

ear   lever   or   steering   mounted   control   paddle  
(

unless   the   engine   is   close   to   its   maximum  
s

peed).
Reverse
To engage reverse, the vehicle must be immobilised   with   your   foot   on   the   brake.
F

Sel
ect position R .
Stopping the vehicle
Before switching off the engine:
-  c hange   to   position   N to be in neutral,
or
-
 
l
eave   the   vehicle   in   gear;   in   this   case   the  
v

ehicle   cannot   be   moved.
Manual mode
F Select position M.
The   gears   engaged   appear   in  
s

uccession   in   the   instrument   panel.
You
  can   change   mode   at   any   time   by  
m

oving   the   gear   lever   from   A to M or
the
  other   way   round.
Never select neutral (position N ) when
moving. There
  is   an   audible   signal   on  
enga

gement
 o
f
 r
everse.For
  all   parking   situations,   you   must
apply the parking brake
 

to   immobilise  
t

he   vehicle.
When
  immobilising   the   vehicle   with   the  
e

ngine   running,   you   must   put   the   gear  
l

ever into neutral (position N).
Before
  doing   anything   under   the  
b

onnet,   ensure   that   the   gear   lever   is   in  
neu

tral (position N)
  and   that   the   parking  
b

rake   is   applied.
At
  low   speed,   if   reverse   gear   is   requested,  
the N
  warning   lamp   flashes   and   the   gearbox  
g

oes   into   neutral   automatically.
To
  engage   reverse,   put   the   gear   lever   into  
p

osition N, then to position R .
driving

11 3
DS3_en_Chap06_conduite_ed01-2014
Four-speed automatic gearbox which offers a choice   between   the   comfort   of   fully   automatic  
o

peration, enhanced by sport and snow
programmes,
 o

r
 m
anual
 g
ear
 c
hanging.
There
  are   therefore   four   driving   modes:
-

a
utomatic operation for electronic
management
  of   the   gears   by   the   gearbox,
-

sp
ort
 
programme   for   a   more   dynamic   style  
o

f   driving,
-

s
now
 
programme   to   improve   driving   when  
t

raction is poor,
-

s
equential
 
operation   for   manual   changing  
o

f   the   gears   by   the   driver.
Automatic gearbox
1. Gear  lever.
2. bu tton "S" (spor t) .
3.
bu

tton "T " (snow).
Gear selection gate
P.  Park.
-  I mmobilisation   of   the   vehicle,   parking   brake  
o

n   or   off.
-
 
S
tarting   the   engine.
R.
 R

everse.
-
 
R
eversing   manoeuvres,   vehicle   stationary,  
e

ngine   at   idle.
N.
 

Neutral.
-
 
I
mmobilisation   of   the   vehicle,   parking   brake  
o

n.
-
 
S
tarting   the   engine.
d

.
 A
utomatic
 ope
ration.
M + / -.

M
anual operation with sequential
changing
  of   the   four   gears.
F
 
P
ush   for wards   to   change   up   through   the  
g

ears.
or
F
 
P
ull   backwards   to   change   down   through  
t

he   gears.
Gear lever
driving

DS3_en_Chap06_conduite_ed01-2014
When you move the lever in the gate to select a  position,   the   corresponding   indicator   is  
d

isplayed   in   the   instrument   panel.
P.
 Pa

rk
R.
R

everse
N.
N

eutral
d

.
 D
rive   (Automatic   driving)
S.
Sport
 pro
gramme
T .
Snow
 pro
gramme
1 2 3 4.
  
G
ears   engaged   during   manual  
ope

ration
-.
 I

nvalid   value   during   manual   operation
displays in the instrument panel
Foot on brake
F Press  the   brake   pedal   when   this  i
ndicator   lamp   is   displayed   in   the  
i

nstrument   panel   (e.g.:   starting  
t

he
 eng
ine).
Moving off
If position N is selected inadvertently
while  driving,   allow   the   engine   to  
r

eturn to idle then select position d to
accelerate.
If
  the   ambient   temperature   is   below  
-

23°C,   the   engine   should   be   left   at   idle  
f

or   four   minutes,   to   ensure   the   correct  
o

peration   and   life   of   the   engine   and  
g

earbox. When
  the   engine   is   running   at   idle,   with  t
he   brakes   released,   if   position   R
, d or
M   is   selected,   the   vehicle   moves   even  
w

ithout   the   accelerator   being   pressed.
When
  the   engine   is   running,   never  
l

eave children in the vehicle without
supervision.
When
  carrying   out   maintenance   with  
t

he   engine   running,   apply   the   parking  
b

rake   and   select   position   P.
F
 
A

pply   the   parking   brake.
F

Sel
ect position P or N
.
F
 
S

tart   the   engine.
If this procedure is not followed, there is an
audible   signal,   accompanied   by   the   display   of  
a

n
 
warning   message.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
R

elease   the   parking   brake.
F

Sel
ect position R
, d or M
.
F
 
G

radually   release   the   brake   pedal.
The
 
vehicle   moves   off   immediately.

11 5
DS3_en_Chap06_conduite_ed01-2014
Automatic operation
F Select position d for automatic c hanging o
f   the   four   gears.
The
  gearbox   then   operates   in   auto-adaptive  
m

ode,   without   any   intervention   on   the   part  
o

f   the   driver.   It   continuously   selects   the   most  
s

uitable   gear   according   to   the   style   of   driving,  
t

he profile of the road and the load in the
vehicle.
For
  maximum   acceleration   without   touching   the  
g

ear   lever,   press   the   accelerator   pedal   down  
f

ully   (kick   down).   The   gearbox   changes   down  
a

utomatically   or   maintains   the   gear   selected  
u

ntil   the   maximum   engine   speed   is   reached.
On
  braking,   the   gearbox   changes   down  
a

utomatically   to   provide   efficient   engine  
b

raking.
If you release the accelerator sharply, the
gearbox
  will   not   change   to   a   higher   gear   for  
s

afety   reasons.
Never select position N while the
vehicle
  is   moving.
Never select positions P or R unless
the
  vehicle   is   completely   stationary.
Sport and snow
programmes
These two special programmes supplement the automatic   operation   in   very   specific   conditions  
o

f   use.
Sport programme "S"
F Press button "S" ,   after   starting   the   engine.
The   gearbox   automatically   favours   a   dynamic  
s

tyle   of   driving.
S
  appears   in   the   instrument   panel.
Snow programme "T"
F Press button " T",   after   starting   the   engine.
The   gearbox   adapts   to   driving   on   slippery  
r

oads.
This
  programme   improves   starting   and   drive  
w

hen   traction   is   poor.
T
  appears   in   the   instrument   panel.
Return to automatic
operation
F At  any   time,   press   the   button   selected  a
gain   to   quit   the   programme   engaged   and  
r

eturn   to   auto-adaptive   mode.
driving

DS3_en_Chap06_conduite_ed01-2014
There is a risk of damage to the gearbox:
- i f you press the accelerator and
brake
  pedals   at   the   same   time,
-
 
i
f   you   force   the   movement   of   the  
g

ear   lever   from   the   P position to
another position when the battery
is
  flat.
To
  reduce   fuel   consumption   when   at
 a

  prolonged   standstill   with   the   engine
 r

unning   (traffic   jam...),   put   the   gear   lever   in
 t

he N
 

position   and   apply   the   parking   brake.
If the lever is not in position P
,
when the driver's door is opened or
approximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F

R

eturn the lever to position P ;
 
the
 
m

essage
 d

isappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace.
Operating fault
Manual operation
When the ignition is on, the lighting o f   this   warning   lamp,   accompanied  
b

y
 
an
 
audible   signal   and   a   message   in   the  
m

ultifunction   screen,   indicates   a   gearbox   fault.
In
 
this
 
case,   the   gearbox   switches   to   back-up  
m

ode
 
and
 
is   locked   in   3rd   gear.   You   may   feel  
a

 
substantial   knock   when   changing   from   P
to R
 
and
 
from   N to R .
  This   will   not   cause   any  
d

amage
 
to
 
the   gearbox.
Do
 
not
 
exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact a CITR
oË

N dealer or a qualified
workshop
 
as   soon   as   possible.
F

Sel

ect position M for sequential
 c

hanging
 o

f
 
the
 
four
 
gears.
F

P

ush the lever towards the +
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F

P

ull the lever towards the -
 
sign
 
to
 
change
 
d

own
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 
p

ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 
t

emporarily
 
in
 
automatic
 
mode. This
 
symbol
 
is
 
displayed
 
if
 
a
 
gear
 
i

s
 
not
 
engaged
 
correctly
 
(selector
 
b

etween
 
two
 
positions).
d

 
disappears
 
and
 
the
 
gears
 
e

ngaged
 
appear
 
in
 
succession
 
in
 
the
 
in

strument
 pan

el.
Stopping the vehicle
Before switching off the engine, you can engage p osition P or N 
to   place   the   gearbox   in   neutral.
In
  both   cases,   apply   the   parking   brake   to
 i

mmobilise   the   vehicle.
Invalid value during manual
operation
If the engine speed is too low or too high, the gear   selected   flashes   for   a   few   seconds,   then  
t

he   actual   gear   engaged   is   displayed.
It
  is   possible   to   change   from   position  d
(automatic)
  to   position   M   (manual)   at   any   time.
When
  the   vehicle   is   stationary   or   moving  
v

ery   slowly,   the   gearbox   selects   gear   M1
automatically.
The
  sport   and   snow   programmes   do   not  
o

perate   in   manual   mode.