ESP CITROEN DS4 2023 Manual PDF

13
Interactive voice response
From the contextual menu, select
"DTMF tones " and confirm to use
the numerical keypad to navigate in
the interactive voice response menu.
Consultation call
From the contextual menu, select
" Switch " and confirm to return to a
call left on hold.
Directory
To access the directory, press and
hold SOURCE or SRC.
or press OK , and
select " Call" and confirm.
Select " Directory " to see the list of
contacts. To modify the contacts saved in the
system, press MENU
then select
" Telephone " and confirm.
Select " Directory management "
and confirm.
Yo u c a n :
- "
Consult an entr y ",
- "
Delete an entry ",
- "
Delete all entries ".
The system accesses the
telephone's contacts directory,
depending on its compatibility, and
while it is connected by Bluetooth.
With certain telephones connected
by Bluetooth you can send a contact
to the directory of the audio system.
Contacts imported in this way are
saved in a permanent directory
visible to all, whatever the telephone
connected.
The menu for the directory is not
accessible if it is empty.
Audio settings
Screen C
Press ¯ to display the audio
settings menu.
The settings available are:
-


Ambience,
-

Bass,
-


Treble,
-


Loudness,
-

D

istribution: Personalised or Driver,
-
L

eft/right balance ,
-
F

ader (front/rear balance),
-
Aut

o. volume Select and confirm " Other
settings… " to display the rest of the
list of settings available.
Bluetooth® audio system

14
The distribution (or spatialisation using the
Arkamys© system), is an audio process
which allows the sound quality to be
improved according to the setting chosen,
corresponding to the position of the
listeners in the vehicle.
The audio Ambience, Treble and
Bass


settings are different and
independent for each sound source.
Onboard audio: Arkamys
© Sound Staging
optimises the distribution of sound in the
passenger compartment.
Frequently asked questions
The following information groups together the
answers to the most frequently asked questions
concerning your audio system.
Bluetooth® audio system

15
QUESTIONRESPONSE SOLUTION
There is a difference in sound
quality between the different
audio sources (radio, CD...). To allow for optimal listening quality, the audio settings
(Volume, Bass, Treble, Ambience, Loudness) can be
tailored to different sound sources, which can generate
audible differences when changing source (radio, CD...). Check that the audio settings (Volume, Bass, Treble,
Ambience, Loudness) are adapted to the sources
listened to. It is advisable to set the AUDIO functions
(Bass, Treble, Front-Rear Fader, Left-Right Balance) to
the middle position, select the musical ambience "None"
and set the loudness correction to the "Active" position
in CD mode or to the "Inactive" position in radio mode.
If the bass and treble settings
are modified, the ambience
selected is cancelled. The selection of an ambience imposes specific bass
and treble settings.
To obtain the desired sound quality, modify the treble
and bass settings or select a pre-defined ambience
setting.
If the ambience setting is
changed, the previous settings
for treble and bass are
cancelled.
If the "Driver"/"All passengers"
distribution is modified, the
balance settings are cancelled. Choosing a distribution setting imposes a specific
balance setting. Modifying one without the other is not
possible. Modify the balance or distribution settings to obtain the
desired sound quality.
When changing the balance
setting, the "Driver"/"All
passengers" distribution is
cancelled.
Bluetooth® audio system