lock Citroen GRAND C4 PICASSO RHD 2016 2.G Owner's Guide

86
Access to the third-row
seats
Access to the third-row seats is via the outer second-row sea ts.
F

P
ull the lever E .
  The   seat   is   released   and  
t

he   seat   cushion   comes   up   against   the  
b

ackrest.
F
 
H
old   the   lever   E   in   the   raised   position,  
p

ushing   for wards.   The   whole   seat   slides  
t

owards   the   front   seat.
Space
  becomes   free   behind   the   seat,   the  
third-row
  passengers   can   get   to   their   seats.
Leaving the vehicle from
the third-row seatsRepositioning a seat, from
the outside, with the door
open
In the event of a failure of this system (
lever E ),
  the   passengers   in   the   third  
r

ow can also leave the vehicle after first
folding
  the   backrests   of   the   second-row  
s

eats   using   the   strap   D.
Do
  not   allow   children   to   operate   the  
sea

ts
 w
ithout
 s
upervision.
F

L

ift the lever E
.
 
The
 
seat
 
is
 
released
 
and
 
t

he
 
seat
 
cushion
 
comes
 
up
 
against
 
the
 
b

ackrest.
F
 
P

ush
 
the
 
seat
 
backrest,
 
still
 
holding
 
the
 l
ever E
 
in
 
the
 
raised
 
position. If
 
there   are   passengers   seated   in   the   third   row:
F
 
m

anually   return   the   assembly   as   far  
a

s   possible   rear wards;   the   seat   does  
n

ot   return   to   the   fully   back   position,   so  
a

s   to   retain   legroom   for   the   third-row  
p

assengers,
F
 
f

old   the   seat   cushion   until   it   locks.
Ensure   that   there   is   no   object   on   or   under   the  
s

eat
 
that   you   want   to   move.
Before
 
operating
 
the
 
seats,
 
ensure
 
that
 
t

he
 
tables
 
on
 
the
 
backs
 
of
 
the
 
first-row
 
s

eats
 
are
 
folded
 
away.
Ease of use and comfort

87
Third-row seats
Concertina boards
Folding the concertina boardsF Remove  the   luggage   net.  F
or   more   information   on   the   luggage   net  
a

nd   the   Interior fittings , refer to the
corresponding
 s

ection.
F
 
R
eturn   the   second-row   continuity   panels   to  
t

heir   initial   position   and   lock   them   in   place.
F
 
F
old   the   concertina   boards   and   position  
t

hem
 v
ertically.
F

P
ull on the strap F   located   behind   the   seat  
b

ackrest.   The   backrest   pivots   rear wards,  
p

ulling   the   seat   base   with   it.   The   seat   locks  
i

n   the   open   position.
Each of the two floor panels can
support
 
a
 
load
 
of
 
100
 
kg.
Pull
 
on
 
the
 
control,
 
the
 
3
 
sections
 
of
 
the
 
board
 
w

ill
 
fold
 
like
 
a
 
concertina.
When
 
the
 
third-row
 
seats
 
are
 
upright,
 
these
 
c

oncertina
 
boards
 
can
 
be
 
left
 
either:
-
 
f

lat
 
behind
 
the
 
seats,
-
 
i

n
 
the
 
vertical
 
position,
thereby
 
leaving
 
a
 
storage
 
area
 
available.
Repositioning the
seats
Two rigid concertina boards, which cannot b e   separated   from   the   vehicle,   cover   the  
2 t

hird-row   seats,   when   these   are   in   the   folded  
p

osition.
3
Ease of use and comfort

88
F Return  the   second-row   continuity   panels   to  t
heir   initial   position   and   lock   them.
F
 
L
ower   the   head   restraints.
F
 
C
orrectly   position   the   concertina   board  
v

ertically   behind   the   seat.
F
 
C
heck   that   the   seat   belts   for   the   3
rd row
seats
 
are
 
correctly
 
fixed
 
to
 
the
 
loops   and  
a

re
 
not
 
folded.
F

P

ull the strap G ,
 
located
 
at
 
the
 
bottom   of  
t

he
 
seat
 
backrest.
 
The
 
seat
 
unlocks. Before
  moving   the   third-row   seats,  
r

eturn   the   rigid   floor   plates   of   the  
s

econd-row   seats   to   the   upright   position  
a

nd   lock   them   in   place.
Do   not   try   to   fold   a   third-row   seat   that  h
as   not   first   had   the   backrest   fully  
l

ocked   in   place.
Do
  not   leave   objects   either   on   or  
u

nderneath   the   seat   bases   of   the   third-
row
  seats   when   you   are   folding   them.
Do
  not   leave   your   hand   on   the   control G
as
  you   fold   the   seats,   as   you   risk  
t

rapping
 y
our
 f
ingers.
Do
  not   allow   children   to   operate   the  
sea

ts
 w
ithout
 s
upervision.
F
 
N
ext   push   the   backrest   gently   for wards.  
T

he   backrest   pivots,   folding   onto   the   seat  
b

ase.   The   seat   base   then   folds   into   the  
s

towage   area   provided   for   that   purpose.
F  
R
eposition   the   concertina   boards   over   the  
f

olded   seats.
Folding the seats
Ease of use and comfort

91
Steering wheel adjustment
F When stationary , pull the control lever to
release   the   adjustment   mechanism.
F
 
A
djust   the   height   and   reach   to   suit   your  
d

riving   position.
F
 
P
ush   the   control   lever   to   lock   the  
a

djustment
 m
echanism.
As
  a   safety   measure,   these   operations  
s

hould   only   be   carried   out   with   the  
v

ehicle   stationary.
3
Ease of use and comfort

104
The recharge for the air freshener consists of a cartridge   B   and   its   sealed   container   C.
F
 
R
emove   the   protective   film   D.
F
 
P
lace   the   head   of   the   cartridge   B on the
button A
  of   the   air   freshener.
F
 
R
otate   it   a   quarter   turn   to   lock   it   on   the  
b

utton   and   remove   the   container.
F
 
I
nsert   the   air   freshener   into   its   housing.
You
  can   change   cartridges   at   any   time,   keeping  
t

he   used   cartridges   in   their   original   containers.
Replacing a cartridge
The air freshener button A is independent of the   cartridge.   Cartridges   are   supplied   without  
t

he air freshener button A .
The button of the air freshener A can only be
fitted
  to   the   centre   of   the   dashboard   with   a  
c

artridge   attached.
Therefore
  always   keep   the   air   freshener  
b

utton A   and   one   cartridge.
Replacement
  cartridges   are   available,  
d

epending   on   country,   either   on   the   Internet  
s

ite   or   from   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
Locations
  are   provided   in   the   glove   box   for  
s

toring   cartridges   and   containers.
Air freshener button
For safety, use only cartridges that are provided   for   this   purpose.
Retain
  the   containers   for   storing   used  
c

artridges.
Do
  not   recharge   or   dismantle   the  
c

artridges.
Keep
  them   out   of   reach   of   children   and  
an

imals.
Avoid
  all   contact   with   the   skin   and   with  
t

he   eyes.
In
  the   event   of   ingestion,   consult   a  
d

octor   and   show   them   the   product  
pa

ckaging
 o
r
 lab
el.
Do
  not   install   or   remove   a   cartridge  
w

hile   you   are   driving.
Ease of use and comfort

106
Sliding sun visor
Sliding blinds are provided for your protection against   bright   sunlight.   They   can   be   adjusted  
m

anually.
F
 
S
lide   the   blind   to   the   desired   position   by  
p

ushing   at   A.
Sun visor rails
Glove box
F To   open   the   glove   box,   raise   the   handle.
It   is   illuminated   when   the   lid   is   opened.
If
  the   vehicle   is   fitted   with   air   conditioning,   it  
h

as   a   ventilation   nozzle   distributing   the   same  
a

ir   as   the   vents   in   the   passenger   compartment.
The
 
blinds
 
are
 
extended
 
on
 
the
 
sun
 
visor
 
rails.
Fold
 
the
 
visor
 
downwards,
 
to
 
protect
 
against
 
d

azzle
 
to
 
the
 
face.
If
 
dazzle
 
is
 
coming
 
from
 
the
 
side
 
windows,
 
d

etach
 
the
 
visor
 
from
 
its
 
housing
 
above
 
the
 
c

entre
 

of
 

the
 

windscreen
 

and
 

pivot
 

it
 

to
 

the side.
The
 
visors
 
are
 
fitted
 
with
 
a
 
locking
 
system
 
on
 
t

heir
 
central
 
housing
 
when
 
the
 
blind
 
is
 
reeled
 
i

n.
 
To
 
detach
 
the
 
visor
 
or
 
to
 
reposition
 
it,
 
it
 
must
 
b

e
 
in
 
a
 
vertical
 
position.
Sliding blinds
Do not attach or suspend heavy objects o n   the   slide   rail   of   the   sun   blind.
Ease of use and comfort

107
Removable console
The removable console is a portable storage space secured to the lower centre console.
I t   has   a   sliding   lid,   an   open   storage   space   and   two   cup   holders.
F
 
R
aise   the   locking   control   located   at   the  
f

ront   of   the   console.
F
 
W
ith   one   hand,   lift   the   front   part   of   the  
c

onsole.
F
 
W
ith   the   other   hand,   grasp   the   rear   part   to  
r

elease   the   removable   console.F

C
arry out these operations in reverse
order.
  Ensure   that   the   console   has   locked  
i

nto   place.
When
  not   fixed   to   its   carrier,   the  
r

emovable   console   should   be   stowed  
i

n   the   boot.   It   could   become   a   projectile  
i

n   the   event   of   a   sudden   stop   or   violent  
im

pact.
Releasing the removable
consoleRefitting the removable
console
3
Ease of use and comfort

111
Rear fittings
Aircraft-style rear tables
These tables, fitted to the backs of the front seats,   incorporate   a   cup-holder   recess   A   and   a  
r

etaining   strap   B.
F
 
P
ull   the   table   downwards   to   open.
F

T
o stow the table, raise it until the latch
locks.
For safety reasons, these tables collapse
downwards
  if   excessive   pressure   is   exerted   on  
t

hem. Reading
  lamps   C   may   be   fitted   in   the   front   seat  
b

ackrests,   behind   the   tables.   They   illuminate  
t

he   sur face   of   the   tables   without   disturbing   the  
o

ther
 p
assengers.
They   can   be   used   only   while   the   table   is   down.
F  
P
ress   the   "on/off "   button   to   turn   the   lamp  
o

n   or   off.
Individual reading lamps
Rear table stowed
Rear table opened
Side blinds
Fitted to the windows for the 2nd row seats, they protect
the
 
passenger
 
compartment
 
from   the   sun's   rays.
F Pull the tab A   and   anchor   the   blind   on   the  h
ook   B.
3
Ease of use and comfort

116
Luggage cover roller
In the 5 -seat configuration, it is installed behind t
he   second-row   seats,   with   the   third-row   seats  
f

olded   away.
In
  the   7-seat   configuration,   it   is   stowed   behind  
t

he   third   row   seats.
Installation
F Position  the   left   and   right   hand   ends   of   the  r
oller   in   cut-out   A,
  with   the   mobile   flap   at  
t

he   front.
F
 
P
ull   out   the   blind   until   it   reaches   the   boot  
p

illars.
F
 
I
nsert   the   guides   of   the   blind   into   the   rails  
o

n the pillars B .
Removal
F Disengage   the   roller   guides   from   the   rails  i
n the pillars B .
F
 
G
uide   the   blind   as   it   is   reeled   in.
F
 
U
nlock   the   roller   by   pressing   one   of  
t

he   grips   located   at   the   ends   of   the   reel  
sup

port.
The
 
mobile
 
flap
 
allows
 
passengers
 
in
 
t

he
 
second
 
row
 
to
 
place
 
their
 
seats
 
in
 
t

he
 
"comfort"
 
position.
Ease of use and comfort

117
Stowing behind the 3rd row seats
To fold the 3rd row seats with the roller
stowed
 
at
 
the
  rear,   it   is   necessary   to   raise   the  
c

oncertina
 
boards   in   order   to   allow   access   to  
t

he
 
seat
 
locking   controls   (red   straps).
F
 E
nsure
 
that
 
the
 
3rd row seats are folded.
F
 F
old
 
the
 
first
 
two
 
concertina   boards.
F
 
I

nstall
 
the
 
roller
 
in
  the   space   above   the   arm  
r

est,
 
one
 
side
 
after   the   other,   inclining   it  
s

li g ht l y.
F
 
S

lide
 
the
 
roller
 
as
 
far   as   it   will   go,   up   to   the  
c

ut-outs
 
provided
 
at   the   back   of   the   boot,  
w

ith
 
the
 
two
 
flaps
 
directed   downwards.
F
 
U

nfold
 
the
 
third
 
row   seats.
The
 
folded
 
concertina
  boards   can   be  
p

ositioned
 
horizontally   or   vertically.
3
Ease of use and comfort