horn DODGE RAM 2002 Service Service Manual

LEFT TAIL/STOP/TURN SIGNAL LAMP - BLACK 3 WAY
CAV CIRCUIT FUNCTION
1 Z13 18BK GROUND
2 L7 18BK/YL PARK LAMP RELAY OUTPUT
3 L63 18DG/BR LEFT TURN SIGNAL
LEFT TWEETER (PREMIUM)-2WAY
CAV CIRCUIT FUNCTION
1 X83 20YL/RD AMPLIFIED HIGH LEFT FRONT SPEAKER (+)
2 X81 20YL/BK AMPLIFIED HIGH LEFT FRONT SPEAKER (-)
LEFT VISOR/VANITY LAMP - BLACK 2 WAY
CAV CIRCUIT FUNCTION
A M1 20PK FUSED B(+)
B Z4 20BK GROUND
LOW NOTE HORN - BLACK 2 WAY
CAV CIRCUIT FUNCTION
1 X2 18DG/RD HORN RELAY OUTPUT
2 Z1 18BK GROUND
MANIFOLD ABSOLUTE PRESSURE SENSOR (5.9L)-3WAY
CAV CIRCUIT FUNCTION
1 K4 20BK/LB SENSOR GROUND
2 K1 18DG/RD MAP SENSOR SIGNAL
3 K6 20VT/WT 5V SUPPLY
BR/BE8W-80 CONNECTOR PIN-OUTS 8W - 80 - 61

CONNECTOR NAME/
NUMBERCOLOR LOCATION FIG.
Engine Oil Pressure Sensor
(V8)BK Near Distributor 5
Engine Oil Pressure Sensor
(V10)Near Oil Filter 8
Engine Oil Pressure Sensor
(Diesel)Left Side of Engine 15
Fuel Heater (Diesel) Left Side of Engine 13
Fuel Injection Pump (Diesel) Left Side of Engine, Below ECM 13
Fuel Injector No.1 BK At Fuel Injector 7
Fuel Injector No. 2 BK At Fuel Injector 7, 8
Fuel Injector No. 3 BK At Fuel Injector 7, 8
Fuel Injector No. 4 BK At Fuel Injector 7, 8
Fuel Injector No. 5 BK At Fuel Injector 7, 8
Fuel Injector No. 6 BK At Fuel Injector 7, 8
Fuel Injector No. 7 BK At Fuel Injector 7, 8
Fuel Injector No. 8 BK At Fuel Injector 7, 8
Fuel Injector No. 9 BK At Fuel Injector 8
Fuel Injector No. 10 BK At Fuel Injector 8
Fuel Pump Module (Gas) LTGY At Frame Rail 29
Fuel Tank Module (Diesel) LTGY At Frame Rail N/S
Fuel Transfer Pump (Diesel) Left Rear of Engine Bottom of Pump 13
Generator BK Front of Engine 10, 11
Glove Box Lamp At Glove Box 30
Headlamp Switch C1 BK Left Side of Instrument Panel 30, 34
Headlamp Switch C2 Left Side of Instrument Panel 30, 34
Heated Mirror Switch Center of Instrument Panel 33
High Note Horn BK Front Bumper Right Support 22
Idle Air Control Motor BK On Throttle Body 12
Ignition Coil (5.9L) GY Right Front of Engine 7, 12
Ignition Coil 4 Pack (8.0L) BK Right Side of Engine 12
Ignition Coil 6 Pack (8.0L) BK Right Side of Engine 12
Ignition Switch C1 BK Steering Column 32
Ignition Switch C2 GY Steering Column 32
Instrument Cluster C1 Rear of Instrument Cluster 30
Instrument Cluster C2 Rear of Instrument Cluster 30
Intake Air Heater Relay
(Diesel)Left Fender Side Shield 21
Intake Air Temperature
Sensor (Diesel)Left Rear of Engine 13
Intake Air Temperature
Sensor (Gas)BK On Intake Manifold 7, 8
Joint Connector No. 1 In Power Distribution Center N/S
Joint Connector No. 2 In Power Distribution Center N/S
8W - 91 - 4 8W-91 CONNECTOR/GROUND/SPLICE LOCATIONBR/BE
CONNECTOR/GROUND/SPLICE LOCATION (Continued)

CONNECTOR NAME/
NUMBERCOLOR LOCATION FIG.
Low Note Horn BK Front Bumper Right Support 22
Manifold Absolute Pressure
Sensor (V8)BK On Throttle Body 7
Manifold Absolute Pressure
Sensor (V10)BK Top of Intake Manifold 12
Manifold Air Pressure Sensor
(Diesel)BK Rear of Intake Manifold 13
Multi-Function Switch On Steering Column 32
Output Speed Sensor DKBL Left Side of Transmission 16
Overdrive Switch On Shift Lever Arm N/S
Overhead Console BK Front of Headliner 25, 26
Oxygen Sensor 1/1 Left Bank
Up (5.9L HD/8.0L)Left Exhaust Manifold Downpipe N/S
Oxygen Sensor 1/1 Upstream
(A/T Except 8.0L)Catalytic Converter Inlet Side N/S
Oxygen Sensor 1/2
Downstream (A/T Except
8.0L)Catalytic Converter Outlet Side N/S
Oxygen Sensor 1/2 Left Bank
Down (California)Catalytic Converter Outlet Side N/S
Oxygen Sensor 1/2
Pre-catalyst (8.0L)Catalytic Converter Inlet Side N/S
Oxygen Sensor 1/3 Post
Catalyst (8.0L)Catalytic Converter Outlet Side N/S
Oxygen Sensor 2/1 Right
Bank Up (5.9L, 5.9HD, 8.0L,
CAL)Right Exhaust Manifold Downpipe N/S
Oxygen Sensor 2/2 Right
Bank Down (California)Catalytic Converter Outlet Side N/S
Oxygen Sensor 1/1 Left Bank
UpLeft Side of Engine N/S
Oxygen Sensor 1/1 Upstream
(M/T Except 8.0L)Catalytic Converter Outlet Side N/S
Park/Neutral Position Switch BK Left Side of Transmission 16
Passenger Airbag At Glove Box 30, 34
Passenger Airbag On/Off
Switch C1Lower Right Side of Instrument Panel 30, 33
Passenger Airbag On/Off
Switch C2Lower Right Side of Instrument Panel 30, 33
Passenger Cylinder Lock
SwitchLTGY In Door N/S
Passenger Door Ajar Switch NAT In Door N/S
Passenger Door Lock Motor BK In Door N/S
Passenger Door Window/
Lock SwitchIn Door N/S
8W - 91 - 6 8W-91 CONNECTOR/GROUND/SPLICE LOCATIONBR/BE
CONNECTOR/GROUND/SPLICE LOCATION (Continued)

8W-97 POWER DISTRIBUTION
TABLE OF CONTENTS
page page
POWER DISTRIBUTION
DESCRIPTION..........................1
OPERATION............................1
SPECIAL TOOLS
POWER DISTRIBUTION SYSTEMS.........2
CIGAR LIGHTER OUTLET
DESCRIPTION..........................2
OPERATION............................2
DIAGNOSIS AND TESTING - CIGAR LIGHTER
OUTLET.............................2
REMOVAL.............................3
INSTALLATION..........................4
CIRCUIT BREAKER
DESCRIPTION..........................4
DIAGNOSIS AND TESTING - CIRCUIT
BREAKER............................4
GENERATOR CARTRIDGE FUSE
DESCRIPTION..........................4
OPERATION............................4
REMOVAL.............................4
INSTALLATION..........................4
IOD FUSE
DESCRIPTION..........................5
OPERATION............................5
REMOVAL.............................6
INSTALLATION..........................6
JUNCTION BLOCK
DESCRIPTION..........................6
OPERATION............................7
DIAGNOSIS AND TESTING - JUNCTION
BLOCK..............................7
REMOVAL.............................7
INSTALLATION..........................8POWER DISTRIBUTION CENTER
DESCRIPTION..........................8
OPERATION............................8
REMOVAL.............................8
INSTALLATION.........................10
POWER OUTLET
DESCRIPTION.........................10
OPERATION...........................10
DIAGNOSIS AND TESTING - POWER OUTLET . 10
REMOVAL.............................11
INSTALLATION.........................11
HORN RELAY
DESCRIPTION.........................12
DIAGNOSIS AND TESTING - HORN RELAY . . . 12
REMOVAL.............................12
INSTALLATION.........................12
HEADLAMP RELAY
DESCRIPTION.........................13
REMOVAL.............................13
INSTALLATION.........................13
MICRO-RELAY
DESCRIPTION.........................13
OPERATION...........................14
DIAGNOSIS AND TESTING - MICRO-RELAY . . 14
REMOVAL.............................14
INSTALLATION.........................14
RELAY
DESCRIPTION.........................14
OPERATION...........................14
DIAGNOSIS AND TESTING - RELAY.........15
REMOVAL.............................15
INSTALLATION.........................15
POWER DISTRIBUTION
DESCRIPTION
This group covers the various standard and
optional power distribution components used on this
model. The power distribution system for this vehicle
consists of the following components:
²Power Distribution Center (PDC)
²Junction Block (JB).
The power distribution system also incorporates
various types of circuit control and protection fea-
tures, including:
²Automatic resetting circuit breakers
²Blade-type fuses²Cartridge fuses
²Circuit splice blocks
²Flashers
²Relays.
Following are general descriptions of the major
components in the power distribution system. See the
owner's manual in the vehicle glove box for more
information on the features and use of all of the
power distribution system components. Refer toWir-
ing Diagramsfor complete circuit diagrams for the
various power distribution system components.
OPERATION
The power distribution system for this vehicle is
designed to provide safe, reliable, and centralized dis-
BR/BE8W-97 POWER DISTRIBUTION 8W - 97 - 1

(4) Press firmly on the cigar lighter or power out-
let receptacle base until the retaining bosses of the
mount are fully engaged in their receptacles.
(5) Install the cigar lighter knob and element into
the cigar lighter receptacle base, or the protective cap
into the power outlet receptacle base.
(6) Reconnect the battery negative cable.
HORN RELAY
DESCRIPTION
The horn relay is a International Standards Orga-
nization (ISO) micro-relay. The terminal designations
and functions are the same as a conventional ISO
relay. However, the micro-relay terminal orientation
(or footprint) is different, current capacity is lower,
and the relay case dimensions are smaller than those
of the conventional ISO relay.
The horn relay is a electromechanical device that
switches battery current to the horn when the horn
switch or when the high-line or premium Central
Timer Module (CTM) grounds the relay coil. See
Horn Relay in the Diagnosis and Testing section of
this group for more information.
The horn relay is located in the Power Distribution
Center (PDC), in the engine compartment. Refer to
the PDC label for relay identification and location.
If a problem is encountered with a continuously
sounding horn, it can usually be quickly resolved by
removing the horn relay from the PDC until further
diagnosis is completed.
The horn relay cannot be repaired and, if faulty or
damaged, it must be replaced.
DIAGNOSIS AND TESTING - HORN RELAY
The headlamp (or security) relay and the horn
relay are located in the Power Distribution Center
(PDC) in the engine compartment. Each of these
relays can be tested as described in the following pro-
cedure, however the circuits they are used in do vary.
To test the relay circuits, refer to the circuit descrip-
tions and diagrams in Wiring Diagrams.
WARNING: ON VEHICLES EQUIPPED WITH AIR-
BAGS, REFER TO THE RESTRAINTS SECTION OF
THE SERVICE MANUAL BEFORE ATTEMPTING ANY
STEERING WHEEL, STEERING COLUMN, OR
INSTRUMENT PANEL COMPONENT DIAGNOSIS OR
SERVICE. FAILURE TO TAKE THE PROPER PRE-
CAUTIONS COULD RESULT IN ACCIDENTAL AIR-
BAG DEPLOYMENT AND POSSIBLE PERSONAL
INJURY.Remove the relay (Fig. 13) from the PDC as
described in this group to perform the following tests:
(1) A relay in the de-energized position should
have continuity between terminals 87A and 30, and
no continuity between terminals 87 and 30. If OK, go
to Step 2. If not OK, replace the faulty relay.
(2) Resistance between terminals 85 and 86 (elec-
tromagnet) should be 75   5 ohms. If OK, go to Step
3. If not OK, replace the faulty relay.
(3) Connect a battery to terminals 85 and 86.
There should now be continuity between terminals
30 and 87, and no continuity between terminals 87A
and 30. If OK, test the relay circuits. If not OK,
replace the faulty relay.REMOVAL
(1) Disconnect and isolate the battery negative
cable.
(2) Remove the cover from the Power Distribution
Center (PDC) (Fig. 14).
(3) Refer to the label on the PDC for horn relay
identification and location.
(4) Unplug the horn relay from the PDC.
INSTALLATION
(1) Install the horn relay by aligning the relay ter-
minals with the cavities in the PDC and pushing the
relay firmly into place.
(2) Install the PDC cover.
(3) Connect the battery negative cable.
(4) Test the relay operation.
Fig. 13 Relay Terminals
TERMINAL LEGEND
NUMBER IDENTIFICATION
30 COMMON FEED
85 COIL GROUND
86 COIL BATTERY
87 NORMALLY OPEN
87A NORMALLY CLOSED
8W - 97 - 12 8W-97 POWER DISTRIBUTIONBR/BE
POWER OUTLET (Continued)

HEADLAMP RELAY
DESCRIPTION
The headlamp (or security) relay is a International
Standards Organization (ISO) micro-relay. The termi-
nal designations and functions are the same as a con-
ventional ISO relay. However, the micro-relay
terminal orientation (or footprint) is different, cur-
rent capacity is lower, and the relay case dimensions
are smaller than those of the conventional ISO relay.
The headlamp relay is a electromechanical device
that switches battery current to the headlamps when
the high-line or premium Central Timer Module
(CTM) grounds the relay coil. See Headlamp Relay in
the Diagnosis and Testing section of this group for
more information.
The headlamp (or security) relay is located in the
Power Distribution Center (PDC), in the engine com-
partment. Refer to the PDC label for relay identifica-
tion and location.
The headlamp relay cannot be repaired and, if
faulty or damaged, it must be replaced.
REMOVAL
(1) Disconnect and isolate the battery negative
cable.
(2) Remove the cover from the Power Distribution
Center (PDC) (Fig. 15).
(3) Refer to the label on the PDC for headlamp (or
security) relay identification and location.
(4) Unplug the headlamp relay from the PDC.
INSTALLATION
(1) Install the headlamp relay by aligning the
relay terminals with the cavities in the PDC and
pushing the relay firmly into place.(2) Install the PDC cover.
(3) Connect the battery negative cable.
(4) Test the relay operation.
MICRO-RELAY
DESCRIPTION
A micro-relay is a conventional International Stan-
dards Organization (ISO) micro relay (Fig. 16).
Relays conforming to the ISO specifications have
common physical dimensions, current capacities, ter-
minal patterns, and terminal functions. The relay is
Fig. 14 Power Distribution Center
1 - COVER
2 - POWER DISTRIBUTION CENTER
Fig. 15 Power Distribution Center
1 - COVER
2 - POWER DISTRIBUTION CENTER
Fig. 16 ISO MICRO RELAY
30 - COMMON FEED
85 - COIL GROUND
86 - COIL BATTERY
87 - NORMALLY OPEN
87A - NORMALLY CLOSED
BR/BE8W-97 POWER DISTRIBUTION 8W - 97 - 13
HORN RELAY (Continued)

(8) Remove the PRNDL cable on column shift vehi-
cles. Put the shift lever inParkposition. Pull the
cable and twist to remove from the position arm.
Push the tab up on bottom of the cable retainer, then
squeeze sides to remove retainer from the column
(Fig. 5).
(9) Remove the tilt lever (if equipped) from the col-
umn.
(10) Remove the upper and lower lock housing
shroud and remove the lower fixed shroud.
(11) Remove the turn signal multi-function switch
connector with a 7mm socket (Fig. 6).(12) Loosen the upper Support Bracket nuts to
allow some slack. This will aid in removal of the
upper fixed shroud.
(13) Remove the electrical connections from Key-in
light, Ignition Switch, Horn, Overdrive Switch and
Clock Spring (Speed Control) (Fig. 7).
(14) Remove the wiring harness from the column
by prying out the plastic retainer buttons.
(15) Remove the toe plate fasteners.
(16) Remove the column from vehicle.
(17) Remove the Ignition and Multi-Function
Switch, then remove the Clock Spring and tape the
Clock Spring to prevent it from turning, (Refer to 8 -
ELECTRICAL/RESTRAINTS/CLOCKSPRING -
REMOVAL).
INSTALLATION
(1) Install the clock spring and switches, (Refer to
8 - ELECTRICAL/RESTRAINTS/CLOCKSPRING -
INSTALLATION).
NOTE: Turn the Ignition Switch to the on position
and verify the gear shifter moves. If the shifter does
not move ensure the Ignition Switch is installed
properly.
(2) Column shift vehicles, install a new grommet.
Use multi-purpose lubricant, or equivalent, to aid
installation of the grommet.
NOTE: A new grommet should be used when ever
the rod is disconnected from the lever.
Fig. 5 PRNDL Drive
1 - PRNDL LEVER
2 - THUMB SCREW
3 - CABLE RETAINER
4 - PRNDL CABLE
Fig. 6 Multi-function Switch
1 - STEERING COLUMN ASSY.
2 - MULTI-FUNCTION SWITCH CONNECTOR
3 - TURN SIGNAL SWITCH AND LEVER
Fig. 7 Steering Column Wiring
1 - KEY-IN SWITCH & HALO LIGHT
2 - MULTI-FUNCTION SWITCH
3 - TURN SIGNAL SWITCH & LEVER
4 - IGNITION SWITCH
5 - SPEED CONTROL
19 - 8 COLUMNBR/BE
COLUMN (Continued)

HIGH MOUNTED STOP LAMP -
INSTALLATION, CENTER................8L-6
HIGH MOUNTED STOP LAMP -
REMOVAL, CENTER....................8L-6
HIGH MOUNTED STOP LAMP UNIT -
INSTALLATION, CENTER................8L-6
HIGH MOUNTED STOP LAMP UNIT -
REMOVAL, CENTER....................8L-6
HIGH PRESSURE FUEL LINES -
DESCRIPTION.......................14-78
HIGH PRESSURE FUEL LINES -
OPERATION.........................14-78
HIGH PRESSURE RELIEF VALVE -
DESCRIPTION.......................24-46
HIGH PRESSURE RELIEF VALVE -
OPERATION.........................24-47
HIGH PRESSURE SWITCH -
DESCRIPTION, A/C...................24-20
HIGH PRESSURE SWITCH - DIAGNOSIS
AND TESTING, A/C...................24-20
HIGH PRESSURE SWITCH -
INSTALLATION, A/C...................24-20
HIGH PRESSURE SWITCH - OPERATION,
A/C................................24-20
HIGH PRESSURE SWITCH - REMOVAL,
A/C................................24-20
HIGH SPEEDS - DESCRIPTION, TIRE
PRESSURE..........................22-7
HIGH-PRESSURE FUEL LINE LEAKS -
DIAGNOSIS AND TESTING.............14-78
HINGE - INSTALLATION.....23-100,23-72,23-80
HINGE - REMOVAL........23-100,23-72,23-79
HITCH - INSTALLATION, TRAILER.........13-11
HITCH - REMOVAL, TRAILER...........13-11
HOISTING - STANDARD PROCEDURE.......0-9
HOLDDOWN - DESCRIPTION, BATTERY . . . 8F-17
HOLDDOWN - INSTALLATION, BATTERY . . . 8F-18
HOLDDOWN - OPERATION, BATTERY.....8F-17
HOLDDOWN - REMOVAL, BATTERY......8F-17
HOLDER - INSTALLATION, CUP........23-110
HOLDER - REMOVAL, CUP............23-109
HOLE REPAIR - DESCRIPTION,
THREADED........................Intro.-9
HONING - STANDARD PROCEDURE,
CYLINDER BORE..................9-11,9-65
HOOD - INSTALLATION...............23-101
HOOD - REMOVAL...................23-101
HOOK - INSTALLATION, COAT..........23-125
HOOK - INSTALLATION, FRONT TOW.....13-10
HOOK - REMOVAL, COAT.............23-124
HOOK - REMOVAL, FRONT TOW.........13-10
HORN - DESCRIPTION.............8H-1,8H-2
HORN - DIAGNOSIS AND TESTING.......8H-2
HORN - INSTALLATION.................8H-3
HORN - OPERATION...............8H-1,8H-2
HORN - REMOVAL....................8H-2
HORN RELAY - DESCRIPTION.......8W-97-12
HORN RELAY - DESCRIPTION...........8H-3
HORN RELAY - DIAGNOSIS AND
TESTING........................8W-97-12
HORN RELAY - DIAGNOSIS AND
TESTING............................8H-3
HORN RELAY - INSTALLATION.......8W-97-12
HORN RELAY - INSTALLATION...........8H-4
HORN RELAY - OPERATION.............8H-3
HORN RELAY - REMOVAL..........8W-97-12
HORN RELAY - REMOVAL..............8H-4
HORN SWITCH - DESCRIPTION..........8H-4
HORN SWITCH - DIAGNOSIS AND
TESTING............................8H-5
HORN SWITCH - OPERATION............8H-5
HORN SWITCH - REMOVAL.............8H-5
HOSE CLAMPS - DESCRIPTION...........7-4
HOSE CLAMPS - OPERATION.............7-4
HOSE WITH AIR CONDITIONING -
INSTALLATION, WATER PUMP BYPASS....7-76
HOSE WITH AIR CONDITIONING -
REMOVAL, WATER PUMP BYPASS........7-73
HOSE WITHOUT AIR CONDITIONING -
INSTALLATION, WATER PUMP BYPASS....7-77
HOSE WITHOUT AIR CONDITIONING -
REMOVAL, WATER PUMP BYPASS........7-76
HOSES - PRESSURE - DESCRIPTION
.....19-39
HOSES - PRESSURE - OPERATION
.......19-39
HOSES - RETURN - DESCRIPTION
.......19-39
HOSES - RETURN - OPERATION
.........19-39
HOSES/LINES/TUBES PRECAUTIONS -
CAUTION, REFRIGERANT
..............24-43HOSES/TUBES - DESCRIPTION, WASHER . . 8R-8
HOSES/TUBES - OPERATION, WASHER....8R-8
HOUSING - ASSEMBLY, HVAC...........24-36
HOUSING - DIAGNOSIS AND TESTING,
CLUTCH..............................6-9
HOUSING - DISASSEMBLY, HVAC........24-35
HOUSING - INSTALLATION, CLUTCH......6-11
HOUSING - INSTALLATION, GEAR........9-188
HOUSING - INSTALLATION, HVAC........24-36
HOUSING - REMOVAL, CLUTCH..........6-11
HOUSING - REMOVAL, GEAR...........9-187
HOUSING - REMOVAL, HVAC...........24-34
HOUSING BUSHING - INSTALLATION,
EXTENSION..................21-156,21-326
HOUSING BUSHING - REMOVAL,
EXTENSION..................21-156,21-326
HOUSING BUSHING AND SEAL -
INSTALLATION, EXTENSION.....21-460,21-497
HOUSING BUSHING AND SEAL -
REMOVAL, EXTENSION.........21-460,21-497
HOUSING COVER - INSTALLATION, GEAR . 9-190
HOUSING COVER - REMOVAL, GEAR.....9-189
HOUSING FLUID LEAK - DIAGNOSIS AND
TESTING, CONVERTER.........21-101,21-273
HOUSING INLET BAFFLE -
INSTALLATION, HVAC.................24-36
HOUSING INLET BAFFLE - REMOVAL,
HVAC..............................24-35
HOUSING PLUG - INSTALLATION,
STEERING GEAR.......................19-30
HOUSING PLUG - REMOVAL, STEERING
GEAR..............................19-29
HOUSING SEAL - INSTALLATION,
EXTENSION..................21-156,21-327
HOUSING SEAL - NV4500 -
INSTALLATION, ADAPTER..............21-42
HOUSING SEAL - NV4500 -
INSTALLATION, EXTENSION............21-42
HOUSING SEAL - NV4500 - REMOVAL,
ADAPTER...........................21-42
HOUSING SEAL - NV4500 - REMOVAL,
EXTENSION.........................21-42
HOUSING SEAL - NV5600 -
INSTALLATION, ADAPTER..............21-85
HOUSING SEAL - NV5600 -
INSTALLATION, EXTENSION............21-85
HOUSING SEAL - NV5600 - REMOVAL,
ADAPTER...........................21-85
HOUSING SEAL - NV5600 - REMOVAL,
EXTENSION.........................21-85
HOUSING SEAL - REMOVAL,
EXTENSION..................21-156,21-326
HUB / BEARING - INSTALLATION......2-17,2-9
HUB / BEARING - REMOVAL..........2-16,2-9
HVAC HOUSING - ASSEMBLY...........24-36
HVAC HOUSING - DISASSEMBLY........24-35
HVAC HOUSING - INSTALLATION........24-36
HVAC HOUSING - REMOVAL............24-34
HVAC HOUSING INLET BAFFLE -
INSTALLATION.......................24-36
HVAC HOUSING INLET BAFFLE -
REMOVAL..........................24-35
HVAC SYSTEM AIRFLOW - DESCRIPTION . 24-30
HYDRAULIC BOOSTER - DIAGNOSIS
AND TESTING........................5-18
HYDRAULIC LIFTERS - CLEANING
....9-37,9-92
HYDRAULIC LIFTERS - INSTALLATION
. 9-37,9-92
HYDRAULIC LIFTERS - REMOVAL
....9-37,9-92
HYDRAULIC PRESSURE TEST -
DIAGNOSIS AND TESTING
.......21-270,21-98
HYDRAULIC SCHEMATICS, SCHEMATICS
AND DIAGRAMS
..............21-132,21-302
HYDRAULIC TAPPETS - DIAGNOSIS AND
TESTING
........................9-36,9-91
HYDRAULIC/MECHANICAL -
DESCRIPTION
.........................5-4
HYDRAULIC/MECHANICAL - WARNING
.....5-4
HYDROMETER TEST - STANDARD
PROCEDURE
........................8F-11
HYDROSTATIC LOCK - STANDARD
PROCEDURE
................9-11,9-122,9-66
IDENTIFICATION - DESCRIPTION,
FASTENER
.........................Intro.-6
IDENTIFICATION AND INFORMATION -
DESCRIPTION, SECTION
.............8W-01-6
IDENTIFICATION LAMP - INSTALLATION,
OUTBOARD
.........................8L-29IDENTIFICATION LAMP - REMOVAL,
OUTBOARD.........................8L-28
IDENTIFICATION NUMBER -
DESCRIPTION, VEHICLE..............Intro.-1
IDENTIFICATION PLATE - DESCRIPTION,
EQUIPMENT.......................Intro.-3
IDLE AIR CONTROL MOTOR -
DESCRIPTION.......................14-40
IDLE AIR CONTROL MOTOR -
OPERATION.........................14-40
IGNITION - SPECIFICATIONS, TORQUE.....8I-2
IGNITION CIRCUIT SENSE -
DESCRIPTION.......................8E-17
IGNITION CIRCUIT SENSE - OPERATION . . 8E-19
IGNITION COIL RESISTANCE, 5.9L
ENGINES............................8I-3
IGNITION COIL RESISTANCE, 8.0L V-10
ENGINE..............................8I-4
IGNITION SWITCH - DESCRIPTION.......19-11
IGNITION SWITCH - DESCRIPTION,
KEY-IN..............................19-9
IGNITION SWITCH - DIAGNOSIS AND
TESTING...........................19-11
IGNITION SWITCH - INSTALLATION......19-12
IGNITION SWITCH - OPERATION........19-11
IGNITION SWITCH - REMOVAL..........19-12
IGNITION SWITCH AND KEY LOCK
CYLINDER - DIAGNOSIS AND TESTING....19-9
IGNITION TIMING, SPECIFICATIONS.......8I-4
IGNITION-OFF DRAW TEST - STANDARD
PROCEDURE........................8F-13
INDEPENDENT FRONT SUSPENSION,
SPECIAL TOOLS.......................2-9
INDICATOR - DESCRIPTION, ABS........8J-14
INDICATOR - DESCRIPTION, AIRBAG.....8J-15
INDICATOR - DESCRIPTION, BRAKE/
PARK BRAKE........................8J-15
INDICATOR - DESCRIPTION, CHECK
GAUGES............................8J-17
INDICATOR - DESCRIPTION, CRUISE.....8J-18
INDICATOR - DESCRIPTION, GEAR
SELECTOR..........................8J-20
INDICATOR - DESCRIPTION, HIGH BEAM . . 8J-21
INDICATOR - DESCRIPTION, LOW FUEL . . . 8J-22
INDICATOR - DESCRIPTION, OVERDRIVE
OFF ...............................8J-26
INDICATOR - DESCRIPTION, SEATBELT . . . 8J-27
INDICATOR - DESCRIPTION, SERVICE
REMINDER..........................8J-27
INDICATOR - DESCRIPTION, TRANS
OVERTEMP.........................8J-31
INDICATOR - DESCRIPTION, TURN
SIGNAL............................8J-32
INDICATOR - DESCRIPTION, UPSHIFT....8J-32
INDICATOR - DESCRIPTION, VTSS........8Q-3
INDICATOR - DESCRIPTION, WAIT-TO-
START .............................8J-34
INDICATOR - DESCRIPTION, WASHER
FLUID..............................8J-35
INDICATOR - DESCRIPTION, WATER-IN-
FUEL..............................8J-36
INDICATOR - DIAGNOSIS AND TESTING,
BRAKE.............................8J-16
INDICATOR - DIAGNOSIS AND TESTING,
FOUR-WHEEL DRIVE..................8J-29
INDICATOR - DIAGNOSIS AND TESTING,
HIGH BEAM.........................8J-21
INDICATOR - DIAGNOSIS AND TESTING,
TURN SIGNAL
.......................8J-32
INDICATOR - DIAGNOSIS AND TESTING,
VTSS
...............................8Q-4
INDICATOR - DIAGNOSIS AND TESTING,
WASHER FLUID
......................8J-35
INDICATOR - OPERATION, ABS
..........8J-14
INDICATOR - OPERATION, AIRBAG
.......8J-15
INDICATOR - OPERATION, BRAKE/PARK
BRAKE
.............................8J-15
INDICATOR - OPERATION, CHECK
GAUGES
............................8J-17
INDICATOR - OPERATION, CRUISE
.......8J-18
INDICATOR - OPERATION, GEAR
SELECTOR
..........................8J-21
INDICATOR - OPERATION, HIGH BEAM
....8J-21
INDICATOR - OPERATION, LOW FUEL
.....8J-22
INDICATOR - OPERATION, OVERDRIVE
OFF
...............................8J-26
INDICATOR - OPERATION, SEATBELT
.....8J-27
16 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page

REAR AXLE, 248RBI...................3-59
REAR AXLE, 267RBI...................3-91
REAR AXLE, 286 RBI.................3-120
REAR AXLE, 286RBI..................3-120
REAR BEARING - INSTALLATION,
OUTPUT SHAFT...............21-172,21-343
REAR BEARING - REMOVAL, OUTPUT
SHAFT......................21-171,21-343
REAR BUMPER - INSTALLATION..........13-6
REAR BUMPER - REMOVAL.............13-6
REAR CAB SIDE PANEL SPEAKER -
INSTALLATION.......................8A-20
REAR CAB SIDE PANEL SPEAKER -
REMOVAL..........................8A-20
REAR CLOSURE PANEL TRIM -
INSTALLATION......................23-121
REAR CLOSURE PANEL TRIM -
REMOVAL.........................23-120
REAR CLUTCH - ASSEMBLY.....21-205,21-377
REAR CLUTCH - CLEANING.....21-204,21-377
REAR CLUTCH - DESCRIPTION . . . 21-203,21-375
REAR CLUTCH - DISASSEMBLY . . 21-204,21-376
REAR CLUTCH - INSPECTION....21-204,21-377
REAR CLUTCH - OPERATION....21-203,21-375
REAR DOOR SPEAKER - INSTALLATION . . . 8A-21
REAR DOOR SPEAKER - REMOVAL......8A-20
REAR FENDER - INSTALLATION.........23-95
REAR FENDER - REMOVAL.............23-95
REAR FLOOR STOWAGE TRAY -
INSTALLATION......................23-121
REAR FLOOR STOWAGE TRAY -
REMOVAL.........................23-121
REAR MOUNT - INSTALLATION . 9-174,9-42,9-98
REAR MOUNT - REMOVAL.....9-174,9-42,9-98
REAR OIL SEAL RETAINER -
INSTALLATION, CRANKSHAFT.......9-163,9-90
REAR OIL SEAL RETAINER - REMOVAL,
CRANKSHAFT...................9-162,9-90
REAR PARK BRAKE CABLE -
INSTALLATION........................5-30
REAR PARK BRAKE CABLE - REMOVAL....5-29
REAR SEAT - INSTALLATION...........23-144
REAR SEAT - REMOVAL..............23-144
REAR SEAT BELT & RETRACTOR -
INSTALLATION......................8O-26
REAR SEAT BELT & RETRACTOR -
REMOVAL..........................8O-26
REAR SEAT BELT BUCKLE -
INSTALLATION......................8O-27
REAR SEAT BELT BUCKLE - REMOVAL . . . 8O-27
REAR SERVO - ASSEMBLY......21-207,21-379
REAR SERVO - CLEANING......21-207,21-379
REAR SERVO - DESCRIPTION....21-207,21-378
REAR SERVO - DISASSEMBLY . . . 21-207,21-378
REAR SERVO - OPERATION
.....21-207,21-378
REAR SPLASH SHIELD - INSTALLATION
. . 23-96
REAR SPLASH SHIELD - REMOVAL
......23-96
REAR VIEW MIRROR - REMOVAL
.......23-126
REAR WHEEL INSTALLATION -
STANDARD PROCEDURE, DUAL
.........22-11
REAR WHEEL SPEED SENSOR -
DIAGNOSIS AND TESTING
..............5-40
REAR WHEEL SPEED SENSOR -
INSTALLATION
........................5-40
REAR WHEEL SPEED SENSOR -
REMOVAL
...........................5-40
REAR WHEELHOUSE LINER -
INSTALLATION
.......................23-96
REAR WHEELHOUSE LINER - REMOVAL
. . 23-96
REARVIEW MIRROR SUPPORT BRACKET
- INSTALLATION
....................23-126
RECEIVER - INSTALLATION, ASH
.......23-107
RECEIVER - REMOVAL, ASH
...........23-107
RECIRCULATION DOOR - INSTALLATION
. . 24-39
RECIRCULATION DOOR - REMOVAL
......24-38
RECIRCULATION DOOR ACTUATOR -
INSTALLATION
.......................24-28
RECIRCULATION DOOR ACTUATOR -
REMOVAL
..........................24-27
RECLINER - INSTALLATION, SEAT BACK
. 23-138
RECLINER - REMOVAL, SEAT BACK
.....23-138
RECOVERY - STANDARD PROCEDURE,
REFRIGERANT
.......................24-45
RECOVERY CONTAINER - 3.9L/5.2L/5.9L/
5.9L DIESEL - DESCRIPTION,
COOLANT
............................7-40RECOVERY CONTAINER - 3.9L/5.2L/5.9L/
5.9L DIESEL - INSTALLATION,
COOLANT............................7-41
RECOVERY CONTAINER - 3.9L/5.2L/5.9L/
5.9L DIESEL - OPERATION, COOLANT.....7-40
RECOVERY CONTAINER - 3.9L/5.2L/5.9L/
5.9L DIESEL - REMOVAL, COOLANT.......7-40
RECOVERY CONTAINER - 8.0L -
DESCRIPTION, COOLANT...............7-41
RECOVERY CONTAINER - 8.0L -
OPERATION, COOLANT.................7-41
REFACING - STANDARD PROCEDURE,
CYLINDER BLOCK....................9-148
REFERENCES - DESCRIPTION, TORQUE . Intro.-11
REFILL - STANDARD PROCEDURE, FLUID
DRAIN............................21-460
REFILLING COOLING SYSTEM 5.9L
DIESEL ENGINE - STANDARD
PROCEDURE.........................7-16
REFILLING COOLING SYSTEM 5.9L/8.0L
ENGINES - STANDARD PROCEDURE......7-16
REFRIGERANT - DESCRIPTION..........24-56
REFRIGERANT - OPERATION............24-57
REFRIGERANT HOSES/LINES/TUBES
PRECAUTIONS - CAUTION.............24-43
REFRIGERANT LINES - DESCRIPTION....24-40
REFRIGERANT LINES - OPERATION......24-41
REFRIGERANT OIL - DESCRIPTION......24-57
REFRIGERANT OIL - OPERATION........24-57
REFRIGERANT OIL LEVEL - STANDARD
PROCEDURE........................24-57
REFRIGERANT RECOVERY - STANDARD
PROCEDURE........................24-45
REFRIGERANT SYSTEM CHARGE -
STANDARD PROCEDURE...............24-46
REFRIGERANT SYSTEM EVACUATE -
STANDARD PROCEDURE...............24-46
REFRIGERANT SYSTEM LEAKS -
DIAGNOSIS AND TESTING.............24-43
REFRIGERANT SYSTEM SERVICE
EQUIPMENT - STANDARD PROCEDURE . . . 24-45
REFRIGERANT SYSTEM SERVICE PORT -
DESCRIPTION........................24-1
REFRIGERANT SYSTEM SERVICE PORT -
OPERATION..........................24-2
REGULATOR - DESCRIPTION, FUEL
FILTER/PRESSURE.....................14-5
REGULATOR - DESCRIPTION, VOLTAGE . . . 8F-30
REGULATOR - INSTALLATION, FUEL
FILTER/PRESSURE.....................14-7
REGULATOR - INSTALLATION, WINDOW . . 23-76
REGULATOR - OPERATION, FUEL
FILTER/PRESSURE.....................14-5
REGULATOR - OPERATION, VOLTAGE.....8F-30
REGULATOR - REMOVAL, FUEL
FILTER/PRESSURE.....................14-5
REGULATOR - REMOVAL, WINDOW......23-76
RELAY - DESCRIPTION.............8W-97-14
RELAY - DESCRIPTION, A/C
COMPRESSOR CLUTCH...............24-17
RELAY - DESCRIPTION, BLOWER
MOTOR............................24-22
RELAY - DESCRIPTION, FUEL HEATER....14-67
RELAY - DESCRIPTION, FUEL INJECTION
PUMP............................14-103
RELAY - DESCRIPTION, FUEL PUMP.....14-40
RELAY - DESCRIPTION, HEADLAMP . . . 8W-97-13
RELAY - DESCRIPTION, HEADLAMP......8L-17
RELAY - DESCRIPTION, HEATED SEAT....8G-14
RELAY - DESCRIPTION, HORN.......8W-97-12
RELAY - DESCRIPTION, HORN...........8H-3
RELAY - DESCRIPTION, INTAKE AIR
HEATER ...........................14-105
RELAY - DESCRIPTION, RADIO CHOKE....8A-7
RELAY - DESCRIPTION, STARTER
MOTOR............................8F-41
RELAY - DESCRIPTION, WIPER.........8R-15
RELAY - DIAGNOSIS AND TESTING . . . 8W-97-15
RELAY - DIAGNOSIS AND TESTING, A/C
COMPRESSOR CLUTCH
...............24-17
RELAY - DIAGNOSIS AND TESTING,
BLOWER MOTOR
....................24-22
RELAY - DIAGNOSIS AND TESTING,
FUEL HEATER
.......................14-68
RELAY - DIAGNOSIS AND TESTING,
HEADLAMP
.........................8L-17
RELAY - DIAGNOSIS AND TESTING,
HEATED SEAT
.......................8G-15RELAY - DIAGNOSIS AND TESTING,
HORN..........................8W-97-12
RELAY - DIAGNOSIS AND TESTING,
HORN..............................8H-3
RELAY - DIAGNOSIS AND TESTING,
RADIO CHOKE........................8A-8
RELAY - DIAGNOSIS AND TESTING,
STARTER ...........................8F-41
RELAY - DIAGNOSIS AND TESTING,
WIPER.............................8R-16
RELAY - INSTALLATION............8W-97-15
RELAY - INSTALLATION, A/C
COMPRESSOR CLUTCH...............24-18
RELAY - INSTALLATION, BLOWER
MOTOR............................24-23
RELAY - INSTALLATION, FUEL HEATER . . . 14-69
RELAY - INSTALLATION, FUEL PUMP.....14-40
RELAY - INSTALLATION, HEADLAMP . . 8W-97-13
RELAY - INSTALLATION, HEADLAMP.....8L-18
RELAY - INSTALLATION, HEATED SEAT . . . 8G-16
RELAY - INSTALLATION, HORN......8W-97-12
RELAY - INSTALLATION, HORN..........8H-4
RELAY - INSTALLATION, INTAKE AIR
HEATER ...........................14-106
RELAY - INSTALLATION, RADIO CHOKE....8A-9
RELAY - INSTALLATION, STARTER
MOTOR............................8F-42
RELAY - INSTALLATION, WIPER.........8R-17
RELAY - OPERATION...............8W-97-14
RELAY - OPERATION, A/C COMPRESSOR
CLUTCH............................24-17
RELAY - OPERATION, BLOWER MOTOR . . . 24-22
RELAY - OPERATION, FUEL HEATER......14-67
RELAY - OPERATION, FUEL INJECTION
PUMP............................14-103
RELAY - OPERATION, FUEL PUMP.......14-40
RELAY - OPERATION, HEADLAMP........8L-17
RELAY - OPERATION, HEATED SEAT.....8G-15
RELAY - OPERATION, HORN.............8H-3
RELAY - OPERATION, INTAKE AIR
HEATER ...........................14-105
RELAY - OPERATION, RADIO CHOKE......8A-8
RELAY - OPERATION, STARTER MOTOR . . . 8F-41
RELAY - OPERATION, WIPER...........8R-15
RELAY - REMOVAL................8W-97-15
RELAY - REMOVAL, A/C COMPRESSOR
CLUTCH............................24-18
RELAY - REMOVAL, BLOWER MOTOR....24-23
RELAY - REMOVAL, FUEL HEATER.......14-69
RELAY - REMOVAL, FUEL PUMP........14-40
RELAY - REMOVAL, HEADLAMP......8W-97-13
RELAY - REMOVAL, HEADLAMP.........8L-18
RELAY - REMOVAL, HEATED SEAT.......8G-16
RELAY - REMOVAL, HORN..........8W-97-12
RELAY - REMOVAL, HORN..............8H-4
RELAY - REMOVAL, INTAKE AIR HEATER . 14-106
RELAY - REMOVAL, RADIO CHOKE.......8A-8
RELAY - REMOVAL, STARTER MOTOR....8F-42
RELAY - REMOVAL, WIPER............8R-17
RELAYS - DIAGNOSIS AND TESTING,
ASD AND FUEL PUMP..................8I-4
RELEASE - STANDARD PROCEDURE,
FUEL SYSTEM PRESSURE..............14-3
RELEASE BEARING - INSTALLATION,
CLUTCH.............................6-12
RELEASE BEARING - REMOVAL, CLUTCH . . . 6-12
RELEASE CABLE - INSTALLATION........23-82
RELEASE CABLE - INSTALLATION, LATCH . 23-103
RELEASE CABLE - REMOVAL...........23-82
RELEASE CABLE - REMOVAL, LATCH....23-103
RELEASE HANDLE - INSTALLATION.......5-32
RELEASE HANDLE - REMOVAL...........5-31
RELIEF VALVE - CLEANING, OIL
PRESSURE.........................9-180
RELIEF VALVE - DESCRIPTION, HIGH
PRESSURE.........................24-46
RELIEF VALVE - INSPECTION, OIL
PRESSURE.........................9-180
RELIEF VALVE - INSTALLATION, OIL
PRESSURE
.........................9-180
RELIEF VALVE - OPERATION, HIGH
PRESSURE
.........................24-47
RELIEF VALVE - REMOVAL, OIL
PRESSURE
.........................9-180
REMINDER INDICATOR - DESCRIPTION,
SERVICE
...........................8J-27
REMINDER INDICATOR - OPERATION,
SERVICE
...........................8J-28
BR/BEINDEX 25
Description Group-Page Description Group-Page Description Group-Page

SUPPLY RESTRICTIONS - DIAGNOSIS
AND TESTING, FUEL..................14-60
SUPPLY TEST - DIAGNOSIS AND
TESTING, VACUUM....................8P-3
SUPPORT - INSTALLATION, LUMBAR....23-133
SUPPORT - REMOVAL, LUMBAR.......23-132
SUPPORT BRACKET - INSTALLATION,
REARVIEW MIRROR.................23-126
SUPPRESSION COMPONENTS -
DESCRIPTION, RADIO NOISE...........8A-12
SUPPRESSION COMPONENTS -
DIAGNOSIS AND TESTING, RADIO
NOISE.............................8A-12
SUSPENSION - STANDARD PROCEDURE,
ALIGNMENT LINK/COIL..................2-5
SUSPENSION, SPECIAL TOOLS -
INDEPENDENT FRONT...................2-9
SUSPENSION, SPECIAL TOOLS -
LINK/COIL...........................2-16
SUSPENSION-REAR, SPECIAL TOOLS.....2-27
SWITCH - DESCRIPTION...............8P-12
SWITCH - DESCRIPTION, A/C HIGH
PRESSURE.........................24-20
SWITCH - DESCRIPTION, A/C LOW
PRESSURE.........................24-21
SWITCH - DESCRIPTION, BLOWER
MOTOR............................24-24
SWITCH - DESCRIPTION, BRAKE LAMP....8L-4
SWITCH - DESCRIPTION, CLUTCH
PEDAL POSITION.....................6-17
SWITCH - DESCRIPTION, DOOR AJAR....8L-34
SWITCH - DESCRIPTION, DOOR
CYLINDER LOCK......................8N-5
SWITCH - DESCRIPTION, DRIVER
POWER SEAT.......................8N-17
SWITCH - DESCRIPTION, DRIVER SEAT
HEATER.............................8G-7
SWITCH - DESCRIPTION, HEADLAMP....8L-18
SWITCH - DESCRIPTION, HORN..........8H-4
SWITCH - DESCRIPTION, IGNITION......19-11
SWITCH - DESCRIPTION, KEY-IN
IGNITION............................19-9
SWITCH - DESCRIPTION, LUMBAR
CONTROL..........................8N-18
SWITCH - DESCRIPTION, MIRROR........8G-2
SWITCH - DESCRIPTION, MULTI-
FUNCTION..........................8L-23
SWITCH - DESCRIPTION, OVERDRIVE . . . 21-190,
21-344
SWITCH - DESCRIPTION, PASSENGER
AIRBAG ON/OFF.....................8O-23
SWITCH - DESCRIPTION, PASSENGER
POWER SEAT.......................8N-20
SWITCH - DESCRIPTION, PASSENGER
SEAT HEATER .......................8G-16
SWITCH - DESCRIPTION, POWER LOCK . . . 8N-8
SWITCH - DESCRIPTION, POWER
MIRROR...........................8N-13
SWITCH - DESCRIPTION, POWER
WINDOW...........................8N-24
SWITCH - DESCRIPTION, PTO..........14-47
SWITCH - DESCRIPTION, SEAT BELT.....8O-28
SWITCH - DESCRIPTION, WASHER
FLUID LEVEL.........................8R-7
SWITCH - DIAGNOSIS AND TESTING,
A/C HIGH PRESSURE.................24-20
SWITCH - DIAGNOSIS AND TESTING,
A/C LOW PRESSURE..................24-21
SWITCH - DIAGNOSIS AND TESTING,
BLOWER MOTOR....................24-25
SWITCH - DIAGNOSIS AND TESTING,
BRAKE LAMP........................8L-5
SWITCH - DIAGNOSIS AND TESTING,
DOOR AJAR.........................8L-34
SWITCH - DIAGNOSIS AND TESTING,
DOOR CYLINDER LOCK................8N-6
SWITCH - DIAGNOSIS AND TESTING,
DRIVER POWER SEAT................8N-17
SWITCH - DIAGNOSIS AND TESTING,
HEADLAMP
.........................8L-19
SWITCH - DIAGNOSIS AND TESTING,
HEATED MIRROR
.....................8G-3
SWITCH - DIAGNOSIS AND TESTING,
HEATED SEAT
...................8G-17,8G-8
SWITCH - DIAGNOSIS AND TESTING,
HORN
..............................8H-5
SWITCH - DIAGNOSIS AND TESTING,
IGNITION
...........................19-11SWITCH - DIAGNOSIS AND TESTING,
MULTI-FUNCTION....................8L-25
SWITCH - DIAGNOSIS AND TESTING,
PARK/NEUTRAL POSITION......21-195,21-367
SWITCH - DIAGNOSIS AND TESTING,
PASSENGER POWER SEAT.............8N-20
SWITCH - DIAGNOSIS AND TESTING,
POWER LOCK........................8N-9
SWITCH - DIAGNOSIS AND TESTING,
POWER WINDOW....................8N-24
SWITCH - DIAGNOSIS AND TESTING,
SEAT BELT .........................8O-28
SWITCH - INSTALLATION..............8P-14
SWITCH - INSTALLATION, A/C HIGH
PRESSURE.........................24-20
SWITCH - INSTALLATION, A/C LOW
PRESSURE.........................24-21
SWITCH - INSTALLATION, BRAKE LAMP . . . 8L-6
SWITCH - INSTALLATION, DOOR AJAR . . . 8L-35
SWITCH - INSTALLATION, DOOR
CYLINDER LOCK......................8N-6
SWITCH - INSTALLATION, DRIVER
POWER SEAT.......................8N-18
SWITCH - INSTALLATION, DRIVER SEAT
HEATER............................8G-10
SWITCH - INSTALLATION, GLOVE BOX
LAMP..............................8L-36
SWITCH - INSTALLATION, HEADLAMP....8L-20
SWITCH - INSTALLATION, IGNITION......19-12
SWITCH - INSTALLATION, MULTI-
FUNCTION..........................8L-28
SWITCH - INSTALLATION, OVERDRIVE....21-191,
21-345
SWITCH - INSTALLATION, PARK/
NEUTRAL POSITION...........21-195,21-367
SWITCH - INSTALLATION, PASSENGER
AIRBAG ON/OFF.....................8O-25
SWITCH - INSTALLATION, PASSENGER
POWER SEAT.......................8N-21
SWITCH - INSTALLATION, PASSENGER
SEAT HEATER .......................8G-19
SWITCH - INSTALLATION, POWER
MIRROR...........................8N-14
SWITCH - INSTALLATION, POWER
WINDOW...........................8N-26
SWITCH - INSTALLATION, WASHER
FLUID LEVEL.........................8R-8
SWITCH - OPERATION................8P-12
SWITCH - OPERATION, A/C HIGH
PRESSURE.........................24-20
SWITCH - OPERATION, A/C LOW
PRESSURE.........................24-21
SWITCH - OPERATION, BLOWER MOTOR . . 24-24
SWITCH - OPERATION, BRAKE LAMP......8L-4
SWITCH - OPERATION, CLUTCH PEDAL
POSITION...........................6-17
SWITCH - OPERATION, DOOR CYLINDER
LOCK...............................8N-5
SWITCH - OPERATION, DRIVER POWER
SEAT ..............................8N-17
SWITCH - OPERATION, DRIVER SEAT
HEATER.............................8G-8
SWITCH - OPERATION, HEADLAMP......8L-18
SWITCH - OPERATION, HORN...........8H-5
SWITCH - OPERATION, IGNITION........19-11
SWITCH - OPERATION, LUMBAR
CONTROL..........................8N-19
SWITCH - OPERATION, MIRROR.........8G-3
SWITCH - OPERATION, MULTI-FUNCTION
. 8L-24
SWITCH - OPERATION, OVERDRIVE
....21-190,
21-344
SWITCH - OPERATION, PASSENGER
AIRBAG ON/OFF
.....................8O-24
SWITCH - OPERATION, PASSENGER
POWER SEAT
.......................8N-20
SWITCH - OPERATION, PASSENGER
SEAT HEATER
.......................8G-17
SWITCH - OPERATION, POWER LOCK
.....8N-8
SWITCH - OPERATION, POWER MIRROR
. . 8N-13
SWITCH - OPERATION, POWER WINDOW
. 8N-24
SWITCH - OPERATION, PTO
............14-47
SWITCH - OPERATION, SEAT BELT
.......8O-28
SWITCH - OPERATION, WASHER FLUID
LEVEL
..............................8R-7
SWITCH - REMOVAL
..................8P-13
SWITCH - REMOVAL, A/C HIGH
PRESSURE
.........................24-20SWITCH - REMOVAL, A/C LOW
PRESSURE.........................24-21
SWITCH - REMOVAL, BLOWER MOTOR . . . 24-25
SWITCH - REMOVAL, BRAKE LAMP.......8L-5
SWITCH - REMOVAL, DOOR AJAR.......8L-35
SWITCH - REMOVAL, DOOR CYLINDER
LOCK...............................8N-6
SWITCH - REMOVAL, DRIVER POWER
SEAT ..............................8N-18
SWITCH - REMOVAL, DRIVER SEAT
HEATER.............................8G-9
SWITCH - REMOVAL, GLOVE BOX LAMP . . 8L-35
SWITCH - REMOVAL, HEADLAMP........8L-19
SWITCH - REMOVAL, HORN.............8H-5
SWITCH - REMOVAL, IGNITION.........19-12
SWITCH - REMOVAL, LUMBAR
CONTROL..........................8N-19
SWITCH - REMOVAL, MULTI-FUNCTION . . . 8L-27
SWITCH - REMOVAL, OVERDRIVE......21-191,
21-344
SWITCH - REMOVAL, PARK/NEUTRAL
POSITION...................21-195,21-367
SWITCH - REMOVAL, PASSENGER
AIRBAG ON/OFF.....................8O-24
SWITCH - REMOVAL, PASSENGER
POWER SEAT.......................8N-21
SWITCH - REMOVAL, PASSENGER SEAT
HEATER............................8G-18
SWITCH - REMOVAL, POWER MIRROR . . . 8N-13
SWITCH - REMOVAL, POWER WINDOW . . 8N-25
SWITCH - REMOVAL, WASHER FLUID
LEVEL..............................8R-8
SWITCH AND KEY LOCK CYLINDER -
DIAGNOSIS AND TESTING, IGNITION......19-9
SWITCHES - DESCRIPTION, REMOTE.....8A-14
SWITCHES - DIAGNOSIS AND TESTING,
REMOTE...........................8A-15
SWITCHES - INSTALLATION, REMOTE....8A-16
SWITCHES - OPERATION, REMOTE......8A-15
SWITCHES - REMOVAL, REMOTE........8A-16
SYMBOLS - DESCRIPTION,
INTERNATIONAL....................Intro.-5
SYMBOLS - DESCRIPTION,
INTERNATIONAL.......................0-1
SYSTEM - CLEANING, BATTERY..........8F-5
SYSTEM - CLEANING, WIPER &
WASHER............................8R-6
SYSTEM - DESCRIPTION, AIR INJECTION . 25-26
SYSTEM - DESCRIPTION, BATTERY.......8F-1
SYSTEM - DESCRIPTION, CHIME
WARNING...........................8B-1
SYSTEM - DESCRIPTION, DIESEL FUEL
DELIVERY..........................14-55
SYSTEM - DESCRIPTION, DIESEL FUEL
INJECTION..........................14-91
SYSTEM - DESCRIPTION, EVAP.........25-32
SYSTEM - DESCRIPTION, FUEL
DELIVERY...........................14-2
SYSTEM - DESCRIPTION, HEATED
MIRROR............................8G-1
SYSTEM - DESCRIPTION, HEATED SEAT . . . 8G-5
SYSTEM - DESCRIPTION, INSTRUMENT
PANEL............................23-105
SYSTEM - DESCRIPTION, METRIC
......Intro.-9
SYSTEM - DESCRIPTION, POWER SEAT
. . 8N-16
SYSTEM - DESCRIPTION, REMOTE
KEYLESS ENTRY
......................8N-2
SYSTEM - DESCRIPTION, SPEED
CONTROL
...........................8P-1
SYSTEM - DESCRIPTION, TURN SIGNAL
& HAZARD WARNING
..................8L-2
SYSTEM - DIAGNOSIS AND TESTING,
AIR IN FUEL
........................14-60
SYSTEM - DIAGNOSIS AND TESTING,
AIRBAG
.............................8O-4
SYSTEM - DIAGNOSIS AND TESTING,
BASE BRAKE
..........................5-5
SYSTEM - DIAGNOSIS AND TESTING,
BATTERY
............................8F-2
SYSTEM - DIAGNOSIS AND TESTING,
CHARGING
..........................8F-25
SYSTEM - DIAGNOSIS AND TESTING,
CHIME WARNING
.....................8B-2
SYSTEM - DIAGNOSIS AND TESTING,
HEATED MIRROR
.....................8G-2
SYSTEM - DIAGNOSIS AND TESTING,
HEATED SEAT
........................8G-6
30 INDEXBR/BE
Description Group-Page Description Group-Page Description Group-Page