wheel FIAT 500 2018 Owner handbook (in English)

37
WINDOW WASHING
41) 4)
WINDSCREEN WIPERS
fig. 27
The stalk has five different positions
(four speed levels ):
A – windscreen wiper off
B – flick operation
C – continuous slow
D – continuous fast operation
E – temporary fast operation
(toggle position).
WINDSCREEN WIPERS
WITH AUTOMATIC
WIPING
The stalk can be put in four different
positions (fig. 28):
A - windscreen wiper stationary (0)
B - automatic wiping (AUTO)
C - slow continuous operation (LO)
D - fast continuous operation (HI)
E - temporary fast operation (unstable
position).
When passing directly from position B
to position E, the stalk returns to
position A when it is released.
28DVDF0S0229
“Smart washing” function
Pull the stalk towards the steering
wheel (unstable position) to operate the
windscreen washer. Keep the lever
pulled to activate both the windscreen
washer jet and the windscreen wiper
with a single movement; the latter turns
on automatically if you keep the lever
pulled for more than half a second.
The operation of the windscreen wiper
terminates several strokes after the
stalk is released; a final cleaning stroke
several seconds later completes the
wiping operation.
REAR WINDOW WIPER
41) 4)
❒ Turn ring A fig. 29 from the O
position to the (rearscreen wiper
symbol) position, the rearscreen
wiper operates as follows:
❒ in intermittent mode when the
windscreen wiper is not operating;
❒ in synchronous mode (at half the
speed of the windscreen wiper)
when the windscreen wiper is
operating;
❒ in continuous mode with reverse
gear engaged and the control
active.
27
E
A
B
C
D
DVDF0S009c

KNOWING YOUR CAR
38
With the windscreen wiper on and
reverse gear engaged, rear window
wiping will be continuous in the same
way.
“Smart washing” function
❒ Push the lever towards the
dashboard and hold it in position to
activate the rear window washer jet.
RAIN SENSOR
(for versions/markets, where provided)
4)
The sensor will be activated when the
ignition device is turned to MAR, and
will be deactivated in the STOP
position.
29DVDF0S0217c
This is a device located behind the
interior rear view mirror fig. 30, in
contact with the windscreen. It can
measure the amount of rain and,
consequently, control the automatic
windscreen wiping mode depending
on the amount of water on the
windscreen.
IMPORTANT Keep the window clean in
the sensor area.
AUTOMATIC WIPING
(for versions/markets, where provided)
Activation
The user can choose automatic wiping
by moving the right steering wheel
stalk fig. 28 to the AUTO (B) position.
The activation of the automatic wiping
will be notified to the driver by a single
stroke.
30DVDF0S0215c
Sensitivity Adjustment
The rain sensor sensitivity can be
adjusted through the display menu or
on the UconnectTM 5" or 7” system.
Inhibition
If the starter switch is moved to the
STOP position, leaving the right
steering wheel stalk in the AUTO (B)
position, when the vehicle is next
started (starter switch in the MAR
position), no wiping cycle to prevent
damage to the system if the
windscreen is being washed manually
or if there is ice on it.
To re-enable the automatic wiping
mode:
❒ Put the right steering wheel stalk in
a position other than AUTO and
then back to the AUTO position;
❒ exceed the speed of 5 km/h when
the sensor detects rain.
Deactivation
The user can disable automatic wiping
by moving the right steering wheel
stalk to a position other than AUTO.

47
CONTROLS 17)
DUALDRIVE ELECTRIC
POWER STEERING
(for versions/markets, where provided)
❒ With the key in MAR position,
press the Dualdrive button
A-fig. 47 to activate the CITY
function.
The word CITY will come on in the
instrument panel.
❒ With the CITY function the effort on
the steering wheel is lighter, thereby
facilitating parking manoeuvres.
❒ Press the button again to turn the
function off.
47DVDF0S179c
ECO FUNCTION
(for versions/markets, where provided)
❒ With the ignition key at MAR, press
the ECO B button – fig. 47 to
activate the function. The word
ECO on the display will light up or,
according to the version, a
dedicated screen will be displayed.
❒ When the function is activated, the
car is set for city driving,
characterised by less effort on the
steering wheel (Dualdrive system
on) and reduced fuel consumption.
❒ Press the button again to
deactivate the function.
This function is stored and, at the next
starting, the system keeps the setting it
had before the engine was shut down.
SPORT FUNCTION
(for versions/markets, where provided)
❒ With the ignition key at MAR, press
the SPORT C button – fig. 47 to
activate the function. The word
SPORT on the display will light up
or, according to the version, a
dedicated screen will be displayed.❒ When the function is on, a sports
driving setting is activated that
features more responsive
acceleration and increased force
required at the steering wheel to
produce a more sporty drive.
❒ Press the button again to
deactivate the function.
IMPORTANT When the function is
active, during acceleration the steering
may shudder, which is typical of a
sporty setting.
HAZARD WARNING
LIGHTS
Press the button fig. 48 to switch the
lights on/off. When the hazard warning
lights are on, the
andwarning
lights flash.
IMPORTANT The use of hazard
warning lights is governed by the
highway code of the country you are
driving in: comply with legal
requirements.

KNOWING YOUR CAR
48
Emergency braking
In the event of emergency braking the
hazard warning lights switch on
automatically as well as warning lights
andin the instrument panel.
The lights switch off automatically
when emergency braking ceases.
FRONT/REAR FOG
LIGHTS
(for versions/markets, where provided)
With the dipped beam headlights on,
to turn on the front/rear fog lights, use
the button A fig. 49 as follows:
❒ press once: fog lights on, warning
light
5appears on the instrument
panel;
48DVDF0S0180c
❒ press twice: rear fog lights on,
warning light
4appears on the
instrument panel;
❒ press three times: front/rear fog
lights off.
REAR FOG LIGHTS
(for versions/markets, where provided)
With the dipped beam headlights on,
turn on the rear fog lights pressing the
button B fig. 49. The
4warning light
on the instrument panel will come on.
Press the button again to switch the
lights off.
49DVDF0S0181c
ABS SYSTEM 15)
This system, which is an integral part
of the braking system, prevents one or
more wheels from locking and slipping
in any road surface condition,
irrespective of the intensity of the
braking action, ensuring that the car
can be controlled even during
emergency braking thus optimising
stopping distances.
SYSTEM INTERVENTION
The driver can feel that the ABS
system has come into action because
the brake pedal pulsates slightly and
the system gets noisier: this is entirely
normal with the system operating.

49
ESC (Electronic
Stability Control)
system 15)
This is an electronic system that
controls vehicle stability in the event of
tyre grip loss, helping maintain
directional control.
The system is capable of recognising
potentially dangerous situations in
terms of the stability and intervenes
automatically on the brakes in a
differentiated manner for the four
wheels in order to provide a stabilising
torque.
The ESC system also includes the
following subsystems:
❒ HH (Hill Holder): it activates
automatically when starting with car
stationary, on a road with a
gradient higher than 5%.
❒ ASR (AntiSpin Regulation):
The system automatically operates
in the event of slipping, loss of grip
on wet roads (aquaplaning) and
acceleration on slippery, snowy or
icy roads, etc. on one or both drive
wheels.
The ASR comes on automatically
whenever the engine is started. When
driving it is possible to deactivate and
then reactivate the ASR system by
pressing the button A fig. 50: the
system activation is signalled by the
LED on the same button switching on
and, on some versions, by a message
on the display.
❒ HBA (Hydraulic Brake Assist): it
operates automatically and
improves the braking capacity of the
vehicle during emergency braking.
50DVDF0S0151c
SYSTEM INTERVENTION
It is signalled by the blinking of the
warning light
Ion the instrument
panel, to inform the driver that the car
is in critical stability and grip
conditions.
SYSTEM ACTIVATION
The ESC system switches on
automatically when the engine is
started and cannot be switched off.

KNOWING YOUR CAR
50
iTPMS System
(indirect Tyre
Pressure
Monitoring System)
(for versions/markets, where provided)
48)
RESET PROCEDURE
The iTPMS needs an initial “self-
learning” phase (with length depending
on the driving style and road
conditions: optimal conditions being
driving on a straight road at 80 km/h
for at least 20 minutes) which starts
when the Reset procedure is carried
out.
The Reset procedure must be carried
out:
❒ each time tyre pressure is
modified;
❒ when even only one tyre is
changed;
❒ when tyres are rotated/inverted;
❒ when the space-saver wheel is
fitted.
In a few situations such as sporty
driving, particular conditions of the
road surface (e.g. icy, snowy,
unsurfaced roads...) the signalling may
be delayed or partial in detecting the
contemporary deflation of more than
one tyre.
Under special conditions (e.g. vehicle
loaded asymmetrically on one side,
towing a trailer, damaged or worn tyre,
fitting the space-saver wheel, use of
the “Fix&Go” quick tyre repair kit,
fitting snow chains, fitting different
tyres on the axles) the system may
give false indications or be temporarily
deactivated.
If the system is temporarily
deactivated, the warning light
nflashes for about 75 seconds and then
is continuously on; at the same time,
the display shows a dedicated
message.
This indication is displayed also after
the engine has been switched off and
then on again if the correct operating
conditions are not restored. Before carrying out the “Reset”
procedure, inflate the tyres to the
rated pressure values specified in the
inflation pressure table (see “Wheels”
paragraph in the “Technical
specifications” chapter).
If the Reset procedure is not carried
out, in all above cases, the
nwarning light may give false indications
on one or more tyres.
To carry out the Reset procedure, with
the vehicle stopped and the ignition
key at MAR, use the setup menu (see
the description of the “Display”
paragraph). At the end of the Reset
procedure the display will show the
“Reset saved” message, indicating
that the self-learning has been started.
If the iTPMS self-learning is not
correctly executed, the message is not
displayed.
OPERATING
CONDITIONS
The system is active for speeds above
15 km/h.

VERSION WITH LPG
SYSTEM
45) 29)
INTRODUCTION
The LPG version features two fuel
supply systems: one for petrol and one
for LPG.
Like the petrol system, the LPG system
is timed, sequential multipoint type with
special injectors.
PASSIVE SAFETY/ACTIVE
SAFETY
Passive safety
The car has the same passive safety
specifications as other versions. In
particular, the tank mountings (located
in the spare wheel housing) have been
designed to exceed the Fiat safety
standards for impact tests.
Active safety
The car has the same active safety
specifications as other versions.
Although the LPG system has
numerous safety features, it is
advisable to proceed as follows every
time the car is not in use for a long
period or moved in an emergency as a
result of a breakdown or accident:
❒ unscrew the fixing devices
A - fig. 57, then remove the cover B;
57DVDF0S036c
❒ close the LPG cock by rotating the
knurled ring nut C-fig. 58 clockwise;
❒ refit the cover and tighten the
fastening devices again.
58DVDF0S037c
KNOWING YOUR CAR
56

57
LPG TANK
The car has a (pressurised) tank
A-fig 59 for collecting LPG in a liquid
state. It is ring-shaped and located in
the spare wheel compartment with
suitable protection.
LPG tank certification
The LPG tank is certified in
accordance with the regulations in
force.
In Italy, the tank has a life of 10 years
starting from the car registration date.
If the vehicle has been registered in a
country other than Italy, the duration
and the testing/inspection procedures
of the LPG tank can vary depending
on the national provisions in force in
that country.
59DVDF0S039c
In all case, when the time limit for your
country has expired, go to a Fiat Dealer
to have the tank replaced.
The tank identification data are printed
on the tank, under the multivalve unit:
❒ type-approval country identification
and type-approval number;
❒ type of gas for which it is designed
(LPG);
❒ name of tank manufacturer;
❒ tank commissioning pressure
(30 bar);
❒ maximum refilling percentage (80%);
❒ tank dimensions;
❒ rated tank capacity in litres;
❒ tank manufacture date (month/year);
❒ tank serial number.SELECTION OF
PETROL/LPG
SUPPLY TYPE
The selection switch
(petrol/LPG) is located on the central
tunnel fig. 60 and includes:
❒ A petrol/LPG switch.
❒ B LPG quantity indicator; 5 LEDs of
which four green and one orange to
indicate reserve. The orange LED
turns on when only one green LED
is on.
❒ C petrol operating mode indicator:
amber LED next to the switch A.
This function is controlled directly by
the LPG control unit.
❒ D LPG operating mode indicator:
green LED next to the switch A.
This function is controlled directly by
the LPG control unit.
IMPORTANT If the ignition key is
turned to MAR, all the device LEDs will
stay on for approximately 4 seconds
(check function).
The engine is always started to petrol
to start after which, according to the
position of the switch A-fig. 60 the
following may occur:

63
Steering wheel controls(for versions/markets, where provided)
DESCRIPTION
The controls for the main system functions are present on the steering wheel to make control easier. The activation of the
function selected is controlled, in some cases, by how long the button is pressed (short or long press) as described in the
table below.
DVDF0S0186c63

KNOWING YOUR CAR
64
ButtonInteraction (press)
❒switch microphone on/off during telephone call
z ❒activate/deactivate USB source Pause function
❒activate/deactivate radio Mute function
+/– Short press: turn volume up/down in single steps
Long press: turn volume up/down continuously until released
❒Short press (Radio mode): select next/previous station
”» ❒Long press (Radio mode): scan higher/lower frequencies until released
❒Short press (USB mode): select previous/next track
❒Long press (USB mode): fast forward/rewind until released
SRC ❒select available audio sources: Radio, USB or AUX (where provided)
Steering wheel controls overview