Time FIAT 500 2018 Owner handbook (in English)

Dear Customer,
We would like to congratulate and thank you for choosing a Fiat.
We have written this handbook to help you get to know all the features of your vehicle and use it in the best possible way.
Here you will find information, advice and important warnings regarding use of your vehicle and how to achieve the best
performance from its technical features.
You are advised to read it right through before taking to the road for the first time, to become familiar with the controls and above all
with those concerning brakes, steering and gearbox; at the same time, you can understand the vehicle behaviour on different road
surfaces.
This document also provides a description of special features and tips, as well as essential information for the safe driving, care and
maintenance of your vehicle over time.
After reading it, you are advised to keep the handbook inside the vehicle, for an easy reference and for making sure it remains on
board the vehicle should it be sold.
In the attached Warranty Booklet you will also find a description of the Services that Fiat offers to its customers, the Warranty
Certificate and the detail of the terms and conditions for maintaining its validity.
We are sure that these will help you to get in touch with and appreciate your new vehicle and the service provided
by the people at Fiat.
Enjoy reading. Happy motoring!
This Owner Handbook describes all vehicle versions.
Options, equipment dedicated to specific markets or versions are not explicitly indicated in the text: as a
consequence, you should only consider the information which is related to the trim level, engine and version that you
have purchased. Any content introduced throughout the production of the model, outside the specific request of
options at the time of purchase, will be identified with the wording
(where provided).
All data contained in this publication are intended to help you use your vehicle in the best possible way. FCA Italy
S.p.A. aims at a constant improvement of the vehicles produced. For this reason it reserves the right to make changes
to the model described for technical and/or commercial reasons.
For further information, contact a Fiat Dealership.

READ THIS CAREFULLY
REFUELLING
Petrol engines: Only refuel with unleaded petrol with octane rating (RON) not less than 95, in compliance with the European
specification EN228. Do not use petrol containing methanol or ethanol E85. Using these mixtures may cause misfiring and driving
issues, as well as damage fundamental components of the supply system.
Diesel engines: refuel only with Diesel fuel motor vehicles conforming to the European specification EN590. The use of other
products or mixtures may damage the engine beyond repair and consequently invalidate the warranty, due to the damage caused.
For further details on the use of the correct fuel see the “Refuelling the vehicle” paragraph in the “Starting and driving” chapter.
STARTING THE ENGINE
Versions with manual gearbox (petrol engines): make sure that the handbrake is engaged, put the gear in neutral, fully
depress the clutch without pressing the accelerator, then turn the ignition key to AVV and release it as soon as the engine has
started.
Versions with manual gearbox (diesel engines): make sure that the handbrake is engaged, put the gear in neutral, fully
depress the clutch pedal without pressing the accelerator, then turn the ignition key to MAR and wait for the
mwarning
lights to switch off. Turn the ignition key to AVV and finally release it as soon as the engine starts.
Versions with automatic transmission: make sure that the handbrake is engaged and that the gear lever is in P (Parking) or N
(Neutral), fully depress the brake pedal, then turn the ignition key to AVV.
PARKING ON FLAMMABLE MATERIAL
The catalytic converter develops high temperatures during operation. Do not park the car on grass, dry leaves, pine needles or
other flammable material: fire hazard.
RESPECTING THE ENVIRONMENT
The vehicle is fitted with a system that carries out a continuous diagnosis of the emission-related components in order to help
protect the environment.
ELECTRICAL ACCESSORIES
If, after buying the vehicle, you decide to add electrical accessories (with the risk of gradually draining the battery), contact a Fiat
Dealership. They can calculate the overall electrical requirement and check that the electric system of the vehicle can support the
required load.
SCHEDULED SERVICING
Correct maintenance of the car is essential for ensuring that it maintains its performance and its safety features, its environmental
friendliness and low running costs for a long time to come.
K



USE OF THE OWNER HANDBOOK
OPERATING INSTRUCTIONS
Each time direction instructions (left/right or forwards/backwards) about the car are given, these must be intended as regarding an occupant
in the driver’s seat. Special cases not complying with this rule will be specified as appropriate in the text.
The figures in the Owner Handbook are provided by way of example only: this might imply that some details of the image do not correspond
to the actual arrangement of your vehicle. In addition, the Handbook has been conceived considering vehicles with steering wheel on the left
side; it is therefore possible that on vehicles with steering wheel on the right side, the position or construction of some controls is not exactly
mirror-like with respect to the figure.
To identify the chapter with the information needed you can consult the index at the end of this Owner Handbook.
Chapters can be rapidly identified with dedicated graphic tabs, at the side of each odd page. A few pages further there is a key for getting to
know the chapter order and the relevant symbols in the tabs. There is in any case a textual indication of the current chapter at the side of
each even page.
IMPORTANT PRECAUTIONS AND WARNINGS
While reading this Owner Handbook you will find a series of IMPORTANT PRECAUTIONSto prevent procedures that could damage your
vehicle.
There are also WARNINGSthat must be carefully followed to prevent incorrect use of the components of the vehicle, which could cause
accidents or injuries.
Therefore all IMPORTANT PRECAUTIONSand WARNINGSmust always be carefully followed.
IMPORTANT PRECAUTIONSand WARNINGSare recalled in the text with the following symbols:
personal safety;
vehicle safety;
environmental protection.
NOTE These symbols, when necessary, are indicated besides the title or at the end of the line and are followed by a number.
This number identifies the relevant warning to which it refers, at the end of the Owner Handbook.

13
INSUFFICIENT ENGINE OIL PRESSURE/DECAYED ENGINE OIL
When the ignition key is turned to MAR, the warning light (for versions/markets, where provided) switches on, but it should
switch off as soon as the engine is started.
NOTE For versions/markets, where provided, the indicator may be amber.
Low engine oil pressure
The warning light or the symbol switches on constantly along with a message on the display (for versions/markets, where
provided) when the system detects that engine oil pressure is low.
Engine oil degraded
The warning light switches on and a message is displayed (for versions/markets, where provided).
The warning light may flash in the following ways, depending on the version:
❑ cycles of 3 minutes with intervals with the warning light off for 5 seconds until the oil is changed.
After the initial warning, each time the engine is started up, the warning light will continue to flash in the same mode, until
the oil is changed. A specific message will appear on the display (for versions/
markets, where provided) in addition to the warning light. The lighting of this warning light should not be considered as a
fault, it simply informs the customer that the oil needs to be changed following normal car use.
Engine oil deterioration is accelerated by:
❑ mainly town use of the car which makes the DPF regeneration process more frequent;
❑ use of the vehicle for short drives, in which the engine does not have time to reach its regular operating temperature;
❑ repeated interruption of the regeneration process, signalled by the DPF warning light coming on.
vv
vv
DOORS/BONNET/LUGGAGE COMPARTMENT OPEN (versions with multifunction display)
The warning light appears on the display, together with a dedicated message, on some versions, when one or more doors,
the tailgate or the bonnet (for versions/markets, where provided) are not properly closed.
An acoustic signal is also emitted with the doors open and the car in motion.
ww
LOW BATTERY CHARGE
The warning light switches on when the ignition key is turned to MAR, but it should switch off as soon as the engine has
started (with the engine idling a brief delay before switching off is acceptable).
If the warning light or the symbol on the display (together with a dedicated message on the display on some versions)
remains on, contact a Fiat Dealership immediately.

KNOWING YOUR CAR
14
R
S
DOORS/BONNET/LUGGAGE COMPARTMENT OPEN (colour display)
The symbols appear on the display, together with a dedicated message, on some versions, when one or more doors, the
tailgate or the bonnet
(for versions/markets, where provided) are not properly closed.
An acoustic signal is also emitted with the doors open and the car in motion.
R
S
“DUALOGIC” GEARBOX FAULT (for versions/markets, where provided)
When the ignition key is turned to MAR, the warning light switches on but should switch off after a few seconds.
The warning light comes on flashing, along with a dedicated message on the display and an acoustic signal, to indicate a
gearbox fault.
SEAT BELTS NOT FASTENED
The warning light switches on constantly with the vehicle stationary and the driver’s side or passenger side seat belt
(when the passenger is present) not fastened.
The warning light will flash and a buzzer will sound if the car is in motion and the front seat belts are not correctly fastened.
For permanent deactivation of the acoustic signal (buzzer) of the S.B.R. (Seat Belt Reminder) system contact
a Fiat Dealership. The system can be reactivated at any time using the Setup Menu.
<<
EBD FAULT (Multifunction display)
The simultaneous switching on of the warning lights with the engine on indicates either a failure of the EBD system or that
the system is not available. In this case, the rear wheels may suddenly lock and the vehicle may swerve when braking
sharply.
On some versions the display shows the dedicated message.
Drive very carefully to a Fiat Dealership to have the system inspected.
x
>x
>

15
EBD FAULT (colour display)
The simultaneous switching on of the warning lights with the engine on indicates either a failure of the EBD system or that
the system is not available. In this case, the rear wheels may suddenly lock and the vehicle may swerve when braking
sharply.
On some versions the display shows the dedicated message.
Drive very carefully to a Fiat Dealership to have the system inspected.
x
>x
>
SPEED LIMIT EXCEEDED (Colour display – for versions/markets, where provided)
The symbol is shown on the display, together with a dedicated message and an acoustic signal, when the vehicle exceeds
the speed limit set in the Setup Menu (e.g. 120 km/h).
120
PASSENGER AIRBAG/SIDE BAGS DEACTIVATED
The warning light indicates the passenger’s airbag protection status. If the warning light is off, passenger’s airbag protection
is active: to deactivate it, use the Setup Menu (in this case the LED lights up). When the engine is started (ignition key
turned to MAR position), the warning light turns on for about 8 seconds, provided that at least 5 seconds have elapsed
from when it was switched off. If not, contact a Fiat Dealership.
If the engine is switched off/on again in less than 5 seconds the warning light may remain off. In this case, to check correct
warning light operation, switch the engine off, wait for at least 5 seconds and switch the engine on again.
The warning light may light up with various intensity levels depending on the vehicle conditions. The intensity may also vary
during the same key cycle.
““
ESCESC
ASR SYSTEM DISCONNECTED (Colour display)
The symbol lights up on the colour display together with a dedicated message when the ASR system is deactivated by
pressing the ASR-OFF button on the dashboard. The LED in the button will light up at the same time.
VV
ABS FAULT
The warning light switches on when the ignition key is turned to MAR, but it should switch off after a few seconds.
The warning light comes on, on some versions along with a message on the display, when the system is inefficient or not
available. In this case the braking system maintains its efficiency unaltered but without the advantage of the ABS system.
Drive carefully and contact a Fiat Dealership as soon as possible.
>>

17
FUEL RESERVE - LIMITED RANGE
The warning light switches on when the ignition key is turned to MAR, but it should switch off after a few seconds.
The warning light or the symbol switches on in the display when about 5 litres of fuel are left in the tank. The triangle on the
right side of the symbol indicates the side of the car with the fuel filler.
IMPORTANT If the warning light flashes or the symbol is constantly on, depending on the versions, there is a fault in the
system. If this is the case, go to a Fiat Dealership to have the system checked.
GLOW PLUG/GLOW PLUG PREHEATING FAULT (diesel versions)
Glow plugs
This warning light switches on when the key is turned to MAR (for versions/markets, where provided). It will switch off as
soon as the glow plugs have reached a preset temperature. The engine can be started as soon as the warning light
switches off.
IMPORTANT At moderate or high ambient temperatures the warning light may stay on for an extremely short time.
Glow plug preheating failure
The warning light will flash, on some versions along with a dedicated message on the display, to indicate a fault in the plug
preheating system.
In these cases, contact a Fiat Dealership as soon as possible to have the fault fixed.
mm
DPF CLEANING (PARTICULATE TRAP) IN PROGRESS (diesel versions with DPF)
The warning light switches on when the ignition key is turned to MAR, but it should switch off after a few seconds.
The warning light or symbol appears on the display fixed, on some versions along with a dedicated message on the display,
to notify the driver that the DPF system needs to eliminate captured pollutants (particulate) through the regeneration
process.
The warning light remains off during the regeneration process; it switches on only if the driving conditions require the driver
to be alerted.
To switch the warning light off definitively, the vehicle must be kept moving until the regeneration process is completed.
On average, the process lasts 15 minutes.
Optimal conditions for completing the process are achieved by travelling at 60 km/h with engine speed above 2000 rpm.
When this warning light switches on, it does not indicate a vehicle failure and thus it should not be taken to a workshop. On
some versions, together with the warning light switching on, the display shows a dedicated message.
tt

KNOWING YOUR CAR
20
FUEL CUT-OFF SYSTEM FAULT (colour display)
The display will show the symbol and a dedicated message if the fuel cut-off system is faulty. Contact a Fiat Dealership.
FUEL CUT-OFF SYSTEM (colour display)
The colour display will show the symbol and a dedicated message if the fuel cut-off system intervenes.
For the fuel cut-off system re-activation procedure, see the “Fuel cut-off system” paragraph, in the
“In an emergency” chapter.
ss
EXTERIOR LIGHT FAULT (colour display)
The display will show a symbol and dedicated message if a fault is detected in one of the following lights: daytime running
lights (DRLs) - side lights - direction indicators -rear fog light - number plate lights.
The fault may be caused by a blown bulb, a blown protection fuse or an interruption of the electrical connection.
It is advisable to contact a Fiat Dealership.
BB
SERVICE (SCHEDULED SERVICING) EXPIRED
When the next scheduled service is approaching, the symbol appears on the display, followed by the number of kilometres
or miles left. This is displayed automatically, with ignition key at MAR-ON, 2000 km (or equivalent value in miles) before
servicing or, where provided, 30 days before servicing. It is also displayed each time the key is turned to MAR-ON or, for
versions/markets, where provided, every 200 km (or equivalent value in miles).
Go to a Fiat Dealership, where the “Scheduled Servicing Plan” operations will be performed and the message will be reset.
BRAKE LIGHT FAULT (colour display)
The colour display will show the symbol together with a dedicated message if there is a fault in the brake lights.
The fault may be caused by a blown bulb, a blown protection fuse or an interruption of the electrical connection.
It is advisable to contact a Fiat Dealership
TT

KNOWING YOUR CAR
24
DISPLAY
MULTIFUNCTION
DISPLAY
The standard screen fig. 4 shows the
following information:
1 Odometer (display of distance travelled
in kilometres/miles)
2 Cruise Control/Speed Limiter
3 Indication of possible ice on the road
4 Digital fuel level gauge
5 Date and time
6 Gear engaged indication
(Dualogic versions)
7 Gear Shift Indicator
8 Outside temperature gauge
9 Headlight alignment position
(only with dipped headlights on)
4DVDF0S0225c
10 SPORT driving mode indication / ECO
driving mode indication
11 Dualdrive electric power steering
enabled
12 Digital engine coolant thermometer
13 Speed Limiter set speed
14 Car service indicator
COLOUR DISPLAY
The standard screen fig. 5 shows the
following information:
1 Odometer (display of distance travelled
in kilometres/miles)
2 Digital engine coolant temperature
gauge
3 Digital rev counter (tachometer)
4 Gear Shift Indicator
5 Date
6 Outside temperature gauge
7 Dualdrive electric steering engagement
8 Car speed indication
9 Headlight alignment position (only with
dipped headlights on)
10 Time
11 eco Index
12 Digital fuel level gauge
13 Gear engaged indication
(Dualogic gearbox versions only)SETUP MENU
5DVDF0S172c
6DVDF0S0226c
The setup menu comprises a series of
functions with a circular arrangement.
The setup menu can be activated by
briefly pressing the
MENU button fig. 6.

25
It is possible to move along the setup
menu list by pressing the
+ or – buttons once. Operating
modes are different according to the
characteristics of the option selected.
The menu comprises the following
functions:
❒ DIMMER
❒ SPEED BUZZER
❒ TRIP B ACTIVATION/DATA
❒ SET TIME
❒ SET DATE
❒ AUTOCLOSE
❒ UNITS
❒ LANGUAGE
❒ BUZZER VOLUME
❒ BUTTON VOLUME
❒ SEAT BELT BUZZER
❒ SERVICE
❒ AIRBAG/PASSENGER BAG
❒ DAY LIGHTS
❒ ITPMS RESET
❒ RADIO REPETITION
(for markets/versions, where
provided)
❒ SEE PHONE (for markets/versions,
where provided)
❒ SEE NAVIGATION
(for markets/versions, where
provided)
❒ EXIT MENUTRIP COMPUTER
The Trip computer is used to display
information on car operation when the
key is turned to MAR.
This function includes two separate
trips, namely “Trip A”
and “Trip B”.
Both functions can be reset (reset
means start of a new journey).
“Trip A” may be used to display values
relating to: range (for versions/markets,
where provided), travel distance,
average fuel consumption (for
versions/markets, where provided),
current consumption (for
versions/markets, where provided),
average speed, travel time.
“Best average consumption": in ECO
mode, displays a screen summarising
the best average consumption (where
provided). The icon indicates the
best performance. This information can
be reset by resetting Trip A.
“Trip B” may be used to display the
following values to be displayed: range,
travel distance B, average fuel
consumption B
(for versions/markets, where provided),
average speed B,
travel time B.
SET TIME (SETTING THE
CLOCK)
The time is set through the
multifunction display.
❒ Press the MENU button; the
following two submenus are shown
on the display: “Time” and
“Format”.
❒ Press the + or – button to move
between the two submenus.
❒ Select the required option and
press the MENU button.
❒ When you select the “Clock”
submenu, pressing the MENU
button briefly makes the “hours”
flash on the display.
❒ Press the button + or – to carry out
the adjustment.
❒ Having set the time, briefly press
the MENU button: the
“minutes” will flash on the display.
Set the minutes
using the same procedure as for
the hours.
❒ Having set the time, press and hold
down the MENU button.
–
–
–
–
–