key FIAT CROMA 2009 2.G Blue And Me Instant Navigation Manual
[x] Cancel search | Manufacturer: FIAT, Model Year: 2009, Model line: CROMA, Model: FIAT CROMA 2009 2.GPages: 90, PDF Size: 0.78 MB
Page 40 of 90
39
BLUE&ME
™
in conjunction with Instant Nav
The M.M. PLAYER menu allows you to:
– display the tracks saved on your USB
device
– listen to the audio files saved on your
USB device.
Note
Before using the player, in order to make
sure that your USB device is compatible
with the system, read the section on
COMPATIBLE USB MEMORY DEVICES
or the paragraph about iPod.CONNECTION OF USB DEVICE
TO THE SYSTEM
To connect your UBS device to the sys-
tem, proceed as follows:
– Copy the tracks on your USB device
(for further information, see "Technolo-
gies compatible with the system").
– For USB devices without a USB lead,
simply connect the device (directly or with
the help of an extension) to the USB port
in the car (see fig. 1).
– For USB devices with a lead, connect
one end to your USB device and the oth-
er to the USB port in the car (see fig. 1).– Turn the ignition key to MAR. The sys-
tem will automatically start playing your
digital tracks, selecting them from a library
that is created the moment the USB de-
vice is connected.
– If the AUTO PLAY function is set to
“On”, the system will automatically start
playing your digital tracks.
MULTIMEDIA PLAYER - Setting func-
tions.
When the creation of the multimedia li-
brary is over, it is possible to use the sys-
tem to display and select the tracks pre-
sent and to activate playing.
M M
U U
L L
T T
I I
M M
E E
D D
I I
A A
P P
L L
A A
Y Y
E E
R R
F F
U U
N N
C C
T T
I I
O O
N N
S S
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 39
Page 45 of 90
44
BLUE&ME
™
in conjunction with Instant Nav
MULTIMEDIA PLAYER
SETTINGS (Instant Nav only)
To enter the Multimedia Player settings
menu on the Instant Nav you can:
– Select the Audio function on the
Instant Nav Menu, confirm by pressing the
OK knot to enter the Media Player, press
the OK knob again to confirm the selec-
tion and turn to select the desired item.
or
– Select the Media Player source on
Instant Nav pressing the OKor MEDIA
buttons, press the MUSICbutton and
then press the OK button/knob to confirm
the selection and turn it to select the de-
sired item.Automatic play
The Automatic play function allows you
to set the Instant Nav so that the playing
of digital audio on your USB device starts
as soon as the ignition key is turned to the
MAR position. Once this function is
turned on, the first time you use the play-
er, playing will start automatically, do it be-
fore inserting the device in the USB port
on the car and create or update the mul-
timedia library.Note
If you change the setting of the Auto-
matic play after having connected a USB
device, the new setting will only be acti-
vated the first time you connect another
USB device (or the same USB device with
the updated musical tracks library).
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 44
Page 51 of 90
50
BLUE&ME
™
in conjunction with Instant Nav
REGISTERING A MOBILE
PHONE
In order to use your mobile phone with
the car’s hands free function it must be
registered. During the registration proce-
dure the hands free system will search for
a telephone with Bluetooth
®in its re-
ception range. If it finds it, it will establish
the connection using a PIN (Personal Iden-
tification Number). After having registered
your mobile phone in the system it can be
used through the hands free system.
IMPORTANT The PIN code used for
registering a mobile phone is produced
randomly by the system each time a new
phone is registered, therefore it does not
have to be memorized and if it is mislaid
it will not affect the use of the hands free
system.
The procedure for registering your mo-
bile phone only has to be carried out once;
afterwards the system will automatically
connect your phone each time you get in-
to the car and turn the ignition key to the
MAR position.You can register your mobile phone us-
ing the Registration option in the Settings
menu.
?To register through manual interac-
tion, proceed as follows:
Activate the Main Menu by pressing
ßand select the Settings option by
pressing OKor
ß.
Select the option Registration and
then press OKor
ß. The system will
launch the registration procedure.
The system will show the PIN code re-
quired for registering the mobile
phone on the panel display and it will
repeat it vocally. It is important to
know that this PIN is only used once
for registering the mobile phone and
it is not the PIN for the your SIM card.
For the two subsequent stages, con-
sult your mobile phone manual for
how to register and connect with
Bluetooth
®devices.Look, on your mobile phone, for the
option that allows you to display de-
vices with Bluetooth
®in the oper-
ating range (this option may be called
Search, New Device, etc. on your mo-
bile phone). Select “Blue&Me” from
the devices enabled for Bluetooth
®
present (the name identifies the sys-
tem on your car).
When the mobile requests it, enter
the PIN number on the panel display.
If the registration has been success-
ful, the system will say “Connection in
progress” and at the end will show the
number of the mobile phone regis-
tered on the display as confirmation.
It is important to wait for this confir-
mation message, if you press
ßor
ESCbefore this message appears you
risk cancelling the registration process.
If the registration fails, an error mes-
sage will appear; the procedure will
have to be repeated in this case.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 50
Page 52 of 90
51
BLUE&ME
™
in conjunction with Instant Nav
The first time you register a mobile
phone the system will say “Welcome”
straight after connection. The system
will no longer give this welcome dur-
ing subsequent registration proce-
dures or when the same mobile phone
is connected.
The system will ask you if you want to
copy the phone list as soon as the
phone is registered. It is advisable to
copy the directory. To copy the di-
rectory, press OKor
ß. If you don’t
want to copy the directory, ESC. If
you do not copy the directory at this
point, you can copy it later on using
the SETTINGS, USER DATA, DIREC-
TORY MENU.
On some mobile phones the names in
the directory are not copied auto-
matically, but have to be transferred
by the user using the mobile phone
keypad. If the system asks you, carry
out this procedure following the spe-
cific instructions in your mobile phone
and press
ßwhen you have finished.
}Or, through voice commands:
Press
‘and say “Settings” and then,
at the end of the message from the
system say “Register user”.
The system will show the PIN code re-
quired for registering the mobile
phone on the panel display and it will
repeat it vocally.
For the next two stages, consult your
mobile phone manual for how to reg-
ister and connect devices with Blue-
tooth
®.
Search, on your mobile phone, for the
option that allows you to display de-
vices with Bluetooth
®in the operat-
ing range (this option may be called
Search, New Device, etc. on your mo-
bile phone). Select “Blue&Me” from
the devices enabled for Bluetooth
®
(the name that identifies the hands free
system for your car).When the mobile phone asks you, en-
ter the PIN shown in the display us-
ing your mobile phone keypad. If the
registration has been successful, the
system will say “Connection in
progress” and at the end will show the
number of the mobile phone regis-
tered on the display as confirmation.
It is important to wait for this confir-
mation message, if you press
ßor
ESCbefore this message appears you
risk cancelling the registration process.
If the registration fails, an error mes-
sage will appear; the procedure will
have to be repeated in this case.
The first time you register a mobile
phone the system will say “Welcome”
straight after connection. In subse-
quent registration procedures or
when connecting the same mobile
phone, the system will give this wel-
come message.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 51
Page 53 of 90
52
BLUE&ME
™
in conjunction with Instant Nav
The system will ask you if you want to
copy the directory for the phone just
registered. It is advisable to copy the
directory onto the system. To copy
the directory, say “Yes”. If you don’t
want to copy the directory, say “No”.
On some mobile phones the names in
the directory are not copied auto-
matically, but have to be transferred
by the user using the mobile phone
keypad. If the hands free system asks
you, carry out this procedure follow-
ing the specific instructions in your
mobile phone and press
ßwhen you
have finished.Suggestions
To improve the voice recognition of the
names in your phone list and the accura-
cy of the pronounciation of the system, try
and enter the names in your directory and
save them using the following criteria:
– Avoid abbreviations.
– Write foreign names the way they are
pronounced, according to the system lan-
guage rules set on your car. For example,
it is advisable to enter “Jonathan” as “Giò-
natan”, to improve the recognition accu-
racy and produce the correct pronoun-
ciation by the system.
– When you add or alter names in the
directory, put in the appropriate accents
when required by the names so that they
are correctly pronounced and recognized
by the system. For example “Nicolo Reb-
ora” should be entered as “Nicolò Réb-
ora” to produce the correct pronouncia-
tion.
– When you add or alter names in the
directory, consider that some capital let-
ters on their own may look like Roman
numerals (e.g.: V may be read as fifth).
– When you are calling people using
voice recognition, omit abbreviated names
or middle initials. Notes
– Your mobile phone only has to be reg-
istered once.
– Up to five mobile phones can be reg-
istered on the system but can only used
one at a time.
– To connect a mobile phone that has
already been registered to the system the
Bluetooth
®setting on the mobile phone
you wish to connect must always be acti-
vated.
– Before transferring the names from
your mobile phone to the hands free sys-
tem, make sure that the name of each per-
son is unique and distinctively recogniz-
able so that the voice recognition system
works properly (you cannnot automati-
cally download the directory on all mobile
phones).
– The system will only copy valid names,
i.e. those that contain a name and at least
one telephone number.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 52
Page 68 of 90
67
BLUE&ME
™
in conjunction with Instant Nav
Problem Probable Cause Possible Solution
The display shows: NO TELEPHONE
Or the system says
“No telephone connected”
The display shows:
TEL DISCONNECTED
The display shows: REG. FAILED
Or the system says
“Registration not successful.
Try again, please”
– Turn the mobile phone on
– Make sure that your phone has been
registered
– Make sure that the connection via
Bluetooth
®on your mobile phone
to the car’s hands free system has
been activated (Blue&Me™
identification)
– Make sure that the mobile phone you
have registered on the car’s hands free
system is within the system operating
range
– Turn the mobile phone on and off to
restore the connection with system
– Restore the system turning the
ignition key to the STOP position and
then turning it to th MAR position
– Check that the PIN number is correct
and try and enter it again
– Turn the mobile phone off and on and
then repeat the registration procedure
SETTING FUNCTIONS -
MOBILE PHONE REGISTRATION – The mobile phone registered is
switched off
– The mobile phone registered is not
within the system operating range
(it should be within about
10 m of the system)
– The connection via Bluetooth
®
technology between the system and
the mobile has been disabled on your
mobile phone (Blue&Me™
identification)
– If there has been an error in the
Bluetooth
® connection via for your
mobile phone
– During a phone conversation, the
mobile phone has gone outide the hands
free system operating range
– There has been an error during the
registration procedure
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 67
Page 72 of 90
71
BLUE&ME
™
in conjunction with Instant Nav
Problem Probable Cause Possible Solution
When registering a mobile phone, that is
already registered, the display will show:
REGISTRATION NOT SUCCESSFUL
Or the system says
“REGISTRATION NOT SUCCESSFUL.
TRY AGAIN, PLEASE”
After having copied the mobile phone
directory onto the hands free system,
the prefixes, suffixes or titles
(Mr., Dr, etc.) present for the name
are not recognized by the voice
recognition system
Before repeating the registration of a
mobile phone already registered, it is
not necessary to delete the informa-
tion relating to the registrations made
in the system
When you call a contact in the mobile
phone list vocally, the voice recognition
system does not support the use of
prefixes, suffixes or titlesRemember that the procedure for
registering you mobile phone only has
to be done once; afterwards the
system will connect automatically to
your phone every time you get into
the car and turn the ignition key to
the MAR position.
If you need to repeat the registration of
a mobile phone that has already been
registered, select the DELETE USERS
option in the system and then repeat
the registration
SETTING FUNCTIONS -
MANAGEMENT OF DATA
AND DIRECTORY
SETTING FUNCTIONS -
MOBILE PHONE REGISTRATION
When you call a contact in your mobile
phone list using voice recognition, say
the name without using prefixes, suffixes
or titles. If you have two contacts with
similar names and/or surnames in your
mobile phone list, alter one of the
contacts to make it unique and copy
the directory again onto the hands free
system
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 71
Page 76 of 90
75
BLUE&ME
™
in conjunction with Instant Nav
MULTIMEDIA PLAYER
Problem Probable Cause Possible Solution
Indication on the display: NO FILE
Or the system says:
“No multimedia file found”
After having inserted a USB device
and having turned the ignition key
to the MAR position, you cannot hear
the music
After having inserted a USB device
and turned the ignition key to the MAR
position, there are malfunctions with
the system (e.g. failure to play
music tracks or no voice messages)– No USB device is connected to the
car’s USB port.
– No digital audio file is presenton the
USB device
– If there is a break In the power supply,
for example if the car battery is
disconnected, the system loses the
power supply temporarily and the
multimedialibrary must be
recreated
– Your USB device is not supported by
the system.
It may take a few minutes to create
the multimedia library.
You may have used a USB device with
a PASSWORD function activated.– Follow the instructions for connecting your
USB device to the system.
– Enter the digital audio files on your USB
device following the instructions in your
software for the management of multimedia
files.
– Remove the USB device from the USB
port in the car and reinsert it. When it
is inserted again the multimedia library will
be recreated.
– To be compatible with the system ,
a USB device must be classified as devices
with a USB earth memory.
Wait for the library to be created.
If the creation of the library is taking too
long, you can decide to reduce the amount
of digital audio on your USB device.
Disable the USB device for this
function.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 75
Page 77 of 90
76
BLUE&ME
™
in conjunction with Instant Nav
Problem Probable Cause Possible Solution
Indication on the display:
NO LIST or the system says:
“No playlist found”
Indication on the display:
INCORRECT LIST
Indication on the display:
PLAYLIST EMPTY or the
system says:
“PLAYLIST EMPTY.”
Indication on the display:INCORRECT FILE
Indication on the
Instant Nav display:
MEDIAPLAYER if there
is no USB device connected
to the USB port in the car
Create a playlist on your computer using your application
software for the management of multimedia files and add
it to your USB device
– Make sure that the playlist is in .m3u or .wplformat.
– Create the playlist again following the instructions in the
CREATING A PLAYLIST FOR THE SYSTEM chapter un-
der SUGGESTIONS.
– If the problem persists, delete the playlist from your USB
device.
– Delete the playlist from your USB device or insert the
multimedia files in the playlist, using your software for
the management of multimedia files.
– You can reduce the number of songs in the playlist,
using your multimedia file management software.
If the digital audio is spoilt, delete it from your USB device
– Press the OK button or the dedicated FM, AM buttons at
the front of the Instant Navto change the audio source.
– As long as the ignition key is in the MAR position insert
and then remove the USB device from the USB port in
the car.
– To prevent displaying MEDIAPLAYER if there is no USB
device, we suggest you always extract the device with the
ignition key in the MARposition, or you stop playing
(with the voice command STOP) before removing the
USB device from the USB port in the car. You have tried to play a playlist, but
there are no playlists on the USB device
connected
The playlist is spoilt or not valid
– The playlist does not contain
multimedia files
– The .wplfile is too large for the system
memory
– The playlist does not contain
multimedia file references that are
found on your USB device
The digital audio is spoilt or not valid
The USB device has been removed
from the USB port in the car with the
ignition key in the STOP position
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 76
Page 80 of 90
79
BLUE&ME
™
in conjunction with Instant Nav
Problem Probable Cause Possible Solution
iPod not working
Playing of audio files from iPhone™ devices failed – Use an alternative USB key or reset the
l’iPod for Windows
– Enable usage as a disc (this function cannot
be selected with iPod touch and iPhones)
– Modify the format of the tracks with one
compatible with the system
– Use a Lineaccessori Fiat Media Player
Blue&Me™adapter (see iPod paragraph).
– Use the Media Player Blue&Me™adapter,
available from Lineaccessori Fiat – The iPod could have been updated
with software that is not compatible
with Windows Mobile™(as the
system is developed in partnership
with Microsoft and only systems that
support Windows Mobile™are
compatible)
– The iPod™ is not configured as an ex-
ternal disk
– Its use as an external disk has been en-
abled but it contains Mp4 tracks (these
formats are not supported by the sys-
tem)
– iPod cannot by configured as an
external disk (e.g. iPod Touch, etc.)
– The iPhone™ devices are not config-
urable as external disks iPod
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 79