display FIAT CROMA 2009 2.G Blue And Me Instant Navigation Manual

53
BLUE&ME
™
in conjunction with Instant Nav
– If you want to register your mobile
phone again, the old registration must be
deleted first. All the user data registered
in the system is deleted during this oper-
ation. To delete the old registration, use
the USER DATA, DELETE USERS option.
On your mobile phone, delete the
“Blue&Me” device from the list of Blue-
tooth
®devices following the instructions
in your mobile phone manual (you cannot
automatically download the directory on
all mobile phones).
– If you copy a phone directory that
contains more than 1000 names, the sys-
tem may work slowly and there may be
a deterioration in the voice recognition of
the names in your phone directory.
– If the registration you have made is in-
advertently cancelled, the procedure will
have to be repeated. ADVANCED OPTIONS
?To access the ADVANCED OP-
TIONS menu, using manual interac-
tion, proceed as follows:
Access the Main Menu by pressing
ßand select the SETTINGS OPTION by
pressing OKor
ß.
Select the ADVANCED OPTIONS
menu and then press OKor
ß.
}Or, through voice commands:
Press
‘and say “SETTINGS” and
then “ADVANCED OPTIONS”.
In the ADVANCED OPTIONS, you
can access the SYSTEM CODE and
change the GPRS code.
Note
The SYSTEM CODE is an 8 digit num-
ber which unequivocally identifies the sys-
tem on your vehicle and cannot be
changed.Access to system code
To carry out some of the operations it
may be necessary to know the identifica-
tion code for your system.
?To access this code, through manual
interaction, proceed as follows:
Select the option SYSTEM CODE: and
then press OKor
ß.
The panel display will show the code
for your system.
To exit this display, press OKor
ßor ESC.
}Or, through voice commands:
Press
‘and say “Settings” and then,
at the end of the message from the
system say “Read code”.
The panel display will show the code
for your system.
To exit this menu option, press OK
or
ßor ESC.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 53

54
BLUE&ME
™
in conjunction with Instant Nav
Changing the GPRS connection
code
If the mobile phone service provider re-
quires the setting for the GPRS connec-
tion to be changed, you can do this in the
ADVANCED OPTIONS menu.
?To change the GPRS connection code,
using manual interaction:
Move to the GPRS CODE menu and
press OKor
ß.
GPRS should appear on the display
with a list of digits (1, 2, 3, 4, 5, 6, 7,
8, 9), PREDEF. and DISABLE. To se-
lect a new code for the GPRS con-
nection, press
QorZuntil the de-
sired option appears, then press OK
or
ß. To choose to keep the prede-
fined value, select Predef. To disable
the connection code, select DISABLE
After having reset the GPRS connec-
tion code, the system will display the
message CODE SET.
}To set the GPRS connection code, us-
ing voice commands:
Press
‘and say “Settings” and then
“Connection code”.
The system will reply with the current
GPRS connection code and the cur-
rent value. To change it, say a num-
ber from 1 to 9 or say “Predefined”.
To disable it, say “Disable”. To change
the code, say a number from 1 to 9 or
say “Predefined”. To disable the code,
say “Disable”. (In the previous sen-
tence, the current value is the value
set for the GPRS connection code at
the time it is used).
After having set the new connection
code, the system will reply with “The
connection code is at the new value”
(In the previous sentence the new val-
ue is the value set for the GPRS con-
nection). EXIT FROM MENU SETTINGS
It is possible to exit the settings menu at
the end operation as described below.
?To exit the Settings menu, using man-
ual interaction:
Select the option EXIT and then press
OKor
ß.
}Or, through voice commands:
Press
‘and say “Exit”.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 54

56
BLUE&ME
™
in conjunction with Instant Nav
Mobile phones with management
of individual contacts
If your mobile phone has the capability
of transmitting individual contacts in the
phone directory via Bluetooth
®, during
the registration procedure you will be
asked to transfer the names in the phone
list using your mobile phone.
Mobile phones with management
of SMS text messages (not all
mobile phones support listening to
incoming SMS text messages)
If your mobile phone has the capability
of transmitting SMS messages via Blue-
tooth
®, it is possible to read the incom-
ing SMS text messages via the hands free
system, save them in a dedicated message
list or delete them.COMPATIBLE USB MEMORY
DEVICES USB
Memory devices
The multimedia player is compatible with
most of the USB mass storage devices 1.0,
1.1 or 2.0, which can be configured as hard
disks.
Management of audio files from
iPod™ devices
To improve the connection of your iPod
with the system it is usually necessary to
carry out these few simple operations on
your iPod:
– Configure the iPod for use as an ex-
ternal disc with reference to the instruc-
tion manual for the iPod;
– if the configuration has been made on
an Apple PC, make the configuration in
Windows format:
– Store the sound tracks as Mp3 audio
files compatible with Blue&Me™.
These operations do not adversely
affect listening quality or using tracks
managed by iPod.What I can do
– Listening of tracks in digital quality
– Select tracks (by artist, album, type,
etc.) through voice control or by using the
controls on the steering wheel
– Display information about the track
being played (song title, singer, etc.) on the
instrument panel.
– Recharge your iPod through the USB.
What I cannot do
– Playing of audio tracks from iPod™
devices not configurable as external disks
or iPhone™ (without Media Player
Blue&Me™adapter, see following
Note).
NoteA Lineaccessori Fiat Media Play-
er Blue&Me™ adapter is available for
playing tracks stored on iPod and iPhone
models which cannot be configured as an
external disk.
NoteTo manage audio files from
iPod™ or iPhone™ devices, refer to
“Technologies compatible with the sys-
tem”.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 56

62
BLUE&ME
™
in conjunction with Instant Nav
TABLE OF SMS TEXT MESSAGE READER VOICE COMMANDS
Reading of last
messagge received
Activation of menu
SMS MESSAGE READERReading of last messagge received
Access to received messages list,
the system will show the first
messagge in the list
Deletes all messages present
in the message list, the system will ask for
confirmation to continue with the deletion
Activation of the function
Notification settings
• Read last
• Read last message
• Read message
• Read last SMS
• Read SMS
• Read last SMS
• Read SMS
• Messages received
• Received
• Delete all
• Delete messages
• Delete
• Type of notification
• Notification
• Read last
• Read last message
• Read message
• Read last SMS
• Read SMS
• Read last SMS
• Read SMS
• Message reader
• Messagges
• SMS reader
• SMS
• SMS reader
• SMS
• Read
• Reread
• Read
• Reread
• Call
• Call
• Delete
• Delete
• Delete message
• Delete message
• Reader not activated
• Switch off reader
• Deactivate reader
• Turn off reader
• Deactivate reader
• Forward
• Next
• Next
• Following
• Visual and acoustic
notification
• Visual and acoustic
• Visual plus acoustic
• Acoustic
• Back
• Previous
• Visual notification only
• Visual only
• Visual
Reading of the message
selected from those in the message list
Activation of calling the number for the
message selected
Cancellation of calling the
number for the message
selected
Move to next message
Move to previous message
Deactivation of SMS message reader;
when a new SMS message is received
nothing will be signalled or transmitted
to the system
Signalling, both visual through panel display
and acoustic through a “bip” of the arrival
of a new SMS message
Signalling, visual only through panel display of
the arrival of a new SMS message
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 62

63
BLUE&ME
™
in conjunction with Instant Nav
TABLE OF VOICE COMMANDS FOR SETTING FUNCTIONS
• Settings
• Set
• Configure
Activation of the
SETTINGS MENU
of the hands free system
• User data
Activation of the menu USER DATA
• Delete usersDelection of registration data
for all users
• Add contactsTransfer onto hands free system of the list of names
in the mobile phone connected
NoteFunction only available for mobile phones with
management of individual contacts (**)
• Delete allDeletion of of registration data and all phone
directories /contcts for all
telephones registered, with renewal of hands free
system to original settings
• System codeDisplay of the identification
code for your hands free system
• Connection code
• Connection code Activation of GPRS CODE menu
• Delete directory
• Delete phone list
• Delete numbersDelection of current phone list
• Copy phone list
• Copy phone list
• Copy numbers Transfer of connected mobile phone list directory
onto hands free system.
NoteFunction only available for mobile phones with
management of the directory (*)
• Registrations
• Register
• Register
• Register user
Activation of the procedures for
registering a new mobile phone number
• Activate Privacy
• Deactivate Privacy
(*) If your mobile phone has the capability of automatically transmitting the phone directory via Bluetooth®, the
entire phone list will automatically be copied onto the system during the registration procedure.
(**) If your mobile phone has the capability of transmitting individual contacts in the phone directory via
Bluetooth
®, during the registration procedure you will be asked to transfer the names in the phone list using your
mobile phone.
• Advanced options
Activation/Deactivation of the
PRIVACY FUNCTION
Activation of the
ADVANCED OPTIONS MENU
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 63

65
BLUE&ME
™
in conjunction with Instant Nav
P P
R R
O O
B B
L L
E E
M M

S S
O O
L L
V V
I I
N N
G G
Problem Probable Cause Possible Solution
The display shows: NO DIRECTORY
Or the system says:
“As requested by the user, the directory
has not been copied. To copy the directory
onto the car, move to the SETTINGS
menu and select USER DATA. To
dial a phone number, say “Call number”.”
For mobile phones with management of the
directory
– Use the optionDIRECTORY for the menu
SETTINGS to download the phone list
– Enter the contact details in the phone
directory for your mobile phone and then
download the directory
SETTING FUNCTIONS - MANAGEMENT
OF DATA AND DIRECTORY
For mobile phones with management of
individual contacts
– Use the option ADD CONTACTS in the
menu SETTINGS to transfer the names in
your directory from your mobile phone to
the system
SETTING FUNCTIONS - MANAGE-
MENT OF DATA AND DIRECTORY For mobile phones with directory
management
– When the system has asked
“The directory data will be copied
onto the car. Continue?”, you have
replied “No”
– You have not downloaded the
directory using the SETTINGS menu
– The phone list downloaded has been
deleted
For mobile phones with management of
individual contacts
– When the system has asked
“The directory data will be
copied onto the car. Continue?”, you
have replied “No”
– You have not transferred the names in
your phone list onto the system using
the ADD CONTACTS PROCEDURE
– The phone list downloaded has been
deleted HANDS FREE
General cases
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 65

66
BLUE&ME
™
in conjunction with Instant Nav
Problem Probable Cause Possible Solution
The display shows:
DIRECTORY EMPTY
Or the system says “No names
in the directory. To add contacts
to the directory in the car, move to
the SETTINGS menu and select
“USER DATA”. To dial a phone number,
say “CALL NUMBER.”
For mobile phones with directory
management
– Enter valid contacts (a name at least one
telephone number) into the phone
directory for your mobile phone and
then download the directory
SETTING FUNCTIONS - MANAGE-
MENT OF DATA AND DIRECTORY
For mobile phones with management of
individual contacts
– Download the phone directory again
and make sure that you have
transferred valid contacts onto the
hands free system using your mobile
phone when asked by the system
– Use the option ADD CONTACTS in
the menu SETTINGS to transfer the
names from your mobile phone to the
hands free system
SETTING FUNCTIONS - MANAGE-
MENT OF DATA AND DIRECTORY For mobile phones with directory
management
– You have answered “Yes” to “The
directory data will be copied onto the
car. Continue?” but thephone list
downloaded does not contain valid
names
– You have used the option DIRECTORY
in the menu SETTINGS but the mobile
phone list does not contain valid
contacts
For mobile phones with management of
individual contacts
– When the system has asked
“The directory data will be copied onto
the car. Continue?”, you have answered
“Yes” but you have not TRANSFERRED
VALID CONTACTS DURING THE
UPDATE CONTACTS PROCEDURE
– You have used the option ADD
CONTACTS but you have not trans-
ferred valid contacts to the system
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 66

67
BLUE&ME
™
in conjunction with Instant Nav
Problem Probable Cause Possible Solution
The display shows: NO TELEPHONE
Or the system says
“No telephone connected”
The display shows:
TEL DISCONNECTED
The display shows: REG. FAILED
Or the system says
“Registration not successful.
Try again, please”
– Turn the mobile phone on
– Make sure that your phone has been
registered
– Make sure that the connection via
Bluetooth
®on your mobile phone
to the car’s hands free system has
been activated (Blue&Me™
identification)
– Make sure that the mobile phone you
have registered on the car’s hands free
system is within the system operating
range
– Turn the mobile phone on and off to
restore the connection with system
– Restore the system turning the
ignition key to the STOP position and
then turning it to th MAR position
– Check that the PIN number is correct
and try and enter it again
– Turn the mobile phone off and on and
then repeat the registration procedure
SETTING FUNCTIONS -
MOBILE PHONE REGISTRATION – The mobile phone registered is
switched off
– The mobile phone registered is not
within the system operating range
(it should be within about
10 m of the system)
– The connection via Bluetooth
®
technology between the system and
the mobile has been disabled on your
mobile phone (Blue&Me™
identification)
– If there has been an error in the
Bluetooth
® connection via for your
mobile phone
– During a phone conversation, the
mobile phone has gone outide the hands
free system operating range
– There has been an error during the
registration procedure
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 67

68
BLUE&ME
™
in conjunction with Instant Nav
Problem Probable Cause Possible Solution
The display shows: REG. FAILED
Or the system says
“Registration failed. Start again,
please”
The display shows: PRIVATE NUMBER
The display shows:
ONLY WHEN STATIONARY
Or the system says:
“This function is only activated
with the car stationary”
Repeat the registration procedure. Whilst
entering the PIN, check that the PIN you
are entering into your mobile phone is the
same as the one shown on the panel
multifunction display
SETTING FUNCTIONS - MOBILE
PHONE REGISTRATION
Enter a contact corresponding to the number
of the incoming call in your mobile phone
directory and then download the new
directory/ contact onto the hands free system
In this case there is nothing that can be done
and the message will always appear
Stop the car and try to activate the function
manually or continue driving and carry out the
function using the voice recognition system Three minutes after the system
provides the PIN, required for
registering the mobile phone, the code
is no longer accepted by the system
– The caller is not recognized as being
saved in the phone directory and the
mobile phone registered is not
capable of displaying the identity of the
caller
– The caller has disabled the sending of
their identification to prevent their
name and/or number being displayed
Even just glancing occasionally at the
panel can be dangerous and distract
your attention away from the road.
Some system functions require the
user to pay attention to the panel
display and are only available when the
car is stationary
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 68

71
BLUE&ME
™
in conjunction with Instant Nav
Problem Probable Cause Possible Solution
When registering a mobile phone, that is
already registered, the display will show:
REGISTRATION NOT SUCCESSFUL
Or the system says
“REGISTRATION NOT SUCCESSFUL.
TRY AGAIN, PLEASE”
After having copied the mobile phone
directory onto the hands free system,
the prefixes, suffixes or titles
(Mr., Dr, etc.) present for the name
are not recognized by the voice
recognition system
Before repeating the registration of a
mobile phone already registered, it is
not necessary to delete the informa-
tion relating to the registrations made
in the system
When you call a contact in the mobile
phone list vocally, the voice recognition
system does not support the use of
prefixes, suffixes or titlesRemember that the procedure for
registering you mobile phone only has
to be done once; afterwards the
system will connect automatically to
your phone every time you get into
the car and turn the ignition key to
the MAR position.
If you need to repeat the registration of
a mobile phone that has already been
registered, select the DELETE USERS
option in the system and then repeat
the registration
SETTING FUNCTIONS -
MANAGEMENT OF DATA
AND DIRECTORY
SETTING FUNCTIONS -
MOBILE PHONE REGISTRATION
When you call a contact in your mobile
phone list using voice recognition, say
the name without using prefixes, suffixes
or titles. If you have two contacts with
similar names and/or surnames in your
mobile phone list, alter one of the
contacts to make it unique and copy
the directory again onto the hands free
system
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 71