gas type FIAT PANDA 2009 169 / 2.G Adventure Supplement Manual
[x] Cancel search | Manufacturer: FIAT, Model Year: 2009, Model line: PANDA, Model: FIAT PANDA 2009 169 / 2.GPages: 20, PDF Size: 0.33 MB
Page 9 of 20
9
FIAT PANDA ADVENTURE
ASSEMBLY DIAGRAM fig. 11
The following is merely the description of
assembly with the new hook fixing points.
The tow hook structure must be fastened
in the points shown by the symbol Øwith
a total of 4 M8 screws, 2 M12 screws. The
internal plates 1 must be 6 mm thick. The
hook should be fastened to the body
avoiding any type of drilling and trimming
of the rear bumpers that remains visible
when the hook is removed.
IMPORTANT It is compulsory to fasten a
label (plainly visible) of suitable size and
material with the following wording: MAX
LOAD ON BALL 60 kg
After fitting, screw holes shall be sealed to
prevent exhaust gas inlet.
fig. 11F0G0266m
existing screw
existing hole
existing hole
standard tow ball existing hole
existing
screw
existing hole
603_97_569 PANDA ADV Euro5 GB 9-12-2009 8:06 Pagina 9