technical specifications FIAT SCUDO 2016 Owner handbook (in English)

24SAFETY
DEVICESCORRECT USE
OF THE VEHICLE
WARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYVEHICLE
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
DASHBOARD
AND
CONTROLS
SEAT ARRANGEMENTSDepending on the various versions it is
possible to vary the seat arrangement us-
ing the relevant preset housings on the
floor.
The following figures show some config-
urations that can be obtained according to
the version requested.
F0P0705m
fig. 27/a - 5 seats (Long cab chassis)
F0P0123m
fig. 27 - 4 seats
F0P0124mF0P0125m
fig. 28 - 5 seats
fig. 29 - 6 seats
F0P0126mF0P0127mF0P0128m
fig. 30 - 7 seats
fig. 31 - 8 seats
fig. 32 - 9 seats
020-082 SCUDO LUM GB 19/11/13 09.53 Pagina 24

25
SAFETY
DEVICESCORRECT USE
OF THE VEHICLE WARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYVEHICLE
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX DASHBOARD
AND CONTROLS
HEAD RESTRAINTSTo raise:❒
raise the head restraint until hearing the
locking click.
To lower:
❒
press buttons A-fig. 33or A-fig. 34
and lower the head restraint.
Remember that the head re-
straints should be adjusted
to support the back of your head and
not your neck. Only in this position
do they exert their protective action
WARNING
IMPORTANT Following a different seat
layout:❒
if you take the head rest off, replace it
ad fix it to a support
❒
check that the safety belts are still ac-
cessible and easy for the passenger to
fasten
❒
a passenger must never travel without
having correctly regulated the head rest
or without having regulated and fas-
tened the safety belt
❒
in the long cab chassis versions the
bench seat of the long cab is not suit-
able for positioning a child restraint sys-
tem.
ATTENTION fig. 32/a
Whilst you are driving, it is forbidden to
carry a passenger:
❒
in third row if the backboard placed in
front (second row) is in the table po-
sition;
❒
in third row if the seat/coach placed in
front (second row) is in a folded posi-
tion;
❒
on the centre seat if the right side seat
is in a folded position.
fig. 32/a
F0P0323m
020-082 SCUDO LUM GB 19/11/13 09.54 Pagina 25

STEERING WHEELThe driver can adjust the steering wheel
position both axially and in height.
To adjust the armrests proceed as follows:❒
release the lever A-fig. 35pushing it
forwards (position 2);
❒adjust the steering wheel as required;❒
lock the lever Apulling it towards the
steering wheel (position 1).
fig. 35
F0P0028m
Any adjustment of the steer-
ing wheel position must be
carried out only with the vehicle sta-
tionary and the engine turned off.
WARNING
It is absolutely forbidden to
carry out whatever after-
market operation involving steering
system or steering column modifica-
tions (e.g.: installation of anti-theft
device) that could badly affect per-
formance and safety, cause the lapse
of warranty and also result in non-
compliance of the vehicle with ho-
mologation requirements.
WARNING
26SAFETY
DEVICESCORRECT USE
OF THE VEHICLE
WARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYVEHICLE
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
DASHBOARD
AND
CONTROLS
fig. 33
F0P0026m
fig. 34
F0P0027m
To optimise head restraint protective ac-
tion, adjust the seat back upright and keep
your head as close as possible to the head
restraint.
020-082 SCUDO LUM GB 19/11/13 09.54 Pagina 26

27
SAFETY
DEVICESCORRECT USE
OF THE VEHICLE WARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYVEHICLE
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX DASHBOARD
AND CONTROLS
REARVIEW MIRRORSDRIVING MIRROR fig. 36
The mirror is fitted with a safety device
that causes it to be released in the event
of a violent crash.
It can be adjusted through lever A-fig. 36:❒
normal position
❒
antiglare position.
fig. 36
F0P0029m
fig. 37
F0P0030m
DOOR MIRRORS
Manual adjustment fig. 37
Use knob A.
fig. 38
F0P0031m
Electrical adjustment fig. 38
The mirrors can only be adjusted electri-
cally when the key is at M.
To adjust the armrests proceed as follows:❒
use switch Ato select the mirror re-
quired (left or right);
❒
to adjust the mirror move the switch B
in the four directions;
Electrical folding fig. 38
It is possible only with the starting key in
the Mposition.
Take switch Ato the central position,
therefore move switch Bbackwards.
020-082 SCUDO LUM GB 19/11/13 09.54 Pagina 27

28SAFETY
DEVICESCORRECT USE
OF THE VEHICLE
WARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYVEHICLE
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
DASHBOARD
AND
CONTROLS
Folding
When required (for example when the
mirror causes difficulty in narrow spaces)
it is possible to fold the mirror moving it
from position 1-fig. 39to position 2.
When driving the mirrors shall
always be in position 1-fig. 39.
The lower part of the exter-
nal rear-view mirror on the
driver’s side, with it being curved, it
slightly alters the perception of dis-
tance.
WARNING
Demisting/defrosting
(for versions/markets, where provided)
Mirrors are fitted with resistors that will
activate when turning the heated rear win-
dow on (by pressing button
(
).
IMPORTANT This function is timed and
it will turn off automatically a few minutes
later.
fig. 39
F0P0032m
020-082 SCUDO LUM GB 19/11/13 09.54 Pagina 28

29
SAFETY
DEVICESCORRECT USE
OF THE VEHICLE WARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYVEHICLE
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX DASHBOARD
AND CONTROLS
HEATING AND VENTILATION1.Fixed upper vent
2.Central swivel vents
3.Fixed side vents
4.Side swivel vents
5. Lower vents for front seats
6.Upper vents for rear seats
(where provided).
fig. 40
F0P0033m
fig. 41
F0P0101m
020-082 SCUDO LUM GB 19/11/13 09.54 Pagina 29

30SAFETY
DEVICESCORRECT USE
OF THE VEHICLE
WARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYVEHICLE
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
DASHBOARD
AND
CONTROLS
CONTROLS fig. 44
Air distribution slider Aμ
to convey air to the centre and side
vents;
∑
to warm the feet and convey cooler
air to the dashboard vents, in inter-
mediate temperature conditions;
∂
to heat with outside harsh tempera-
ture: to convey as much air as possi-
ble to the feet;
∏
to warm the feet and at the same time
demist the windscreen;
-
for quick windscreen demisting.
fig. 44
F0P0036m
fig. 42
F0P0034m
fig. 43
F0P0035m
SIDE AND CENTRAL VENTS
fig. 42-43
Vents can be directed in the four positions
shown by the arrows.
AFixed vent for side windows.
BSide adjustable vents.
CCentre adjustable vents.
Vents Aare fixed.
To use vents Band C, operate the rele-
vant device to turn them as required.
020-082 SCUDO LUM GB 19/11/13 09.54 Pagina 30

31
SAFETY
DEVICESCORRECT USE
OF THE VEHICLE WARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYVEHICLE
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX DASHBOARD
AND CONTROLS
Fan activation /speed adjustment
knob B
0= fan off
1-2-3= fan speed
4 -
p
= max. fan speed
Air temperature slider C
(mixing hot and cold air)
Red section = hot air
Blue section = cold air
Air recirculation on/off button D
Press the button to turn air recirculation
on.
Press the button again to turn air recir-
culation off.FAST HEATING
For fast heating of the passenger com-
partment, proceed as follows:
❒
turn slider Cto red section;
❒
turn air recirculation on (if off);
❒
turn slider Ato
∂
;
❒
turn slider Bto 4
-
p(max. fan
speed).
Then use the controls to keep the re-
quired comfort conditions and press but-
ton Dto turn air recirculation off and to
prevent misting up.
IMPORTANT With cold engine, you have
to wait for a few minutes to let the sys-
tem fluid reach the operating temperature. VENTILATION
To ventilate the passenger’s compartment
properly proceed as follows:
❒
turn slider Cto blue section;
❒
turn air recirculation off (if on);
❒
turn slider Ato
μ;
❒
slider Bturned to the required speed.
WARMING THE PASSENGER
COMPARTMENT
Proceed as follows:
❒
turn slider Cto red section;
❒
turn slider Ato the required position;
❒
slider Bturned to the required speed.
020-082 SCUDO LUM GB 19/11/13 09.54 Pagina 31

32SAFETY
DEVICESCORRECT USE
OF THE VEHICLE
WARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYVEHICLE
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX
DASHBOARD
AND
CONTROLS
FRONT WINDOW FAST
DEMISTING/DEFROSTING
(WINDSCREEN AND SIDE
WINDOWS)
Proceed as follows:❒
turn slider Cto red section;
❒
turn air recirculation off (if on);
❒
turn slider Ato
-;
❒
turn slider Bto 4
-
p(max. fan
speed).
After demisting/defrosting, operate the
controls to restore the required comfort.Window demisting
In the event of considerable outside mois-
ture and/or rain and/or considerable dif-
ferences in temperature inside and outside
the passenger compartment, perform the
following preventive demisting procedure:
❒
turn slider Cto red section;
❒
turn air recirculation off by pressing
button D(if off);
❒
turn slider Ato
-
or to
∏
if the win-
dows do not demist;
❒
turn slider Bto 2
ndspeed.HEATED REAR WINDOW AND
DOOR MIRROR
DEMISTING/DEFROSTING fig. 45
(for versions/markets, where provided)
Press button Ato start this function;
when this function is on the button led is
on.
This function is timed and switches off au-
tomatically after 20 minutes. To cut out
this function press again button A.
IMPORTANT Do not apply stickers on
the inside of the rear window over the
heating filaments to avoid damage that
might cause it to stop working properly.
fig. 45
F0P0037m
020-082 SCUDO LUM GB 19/11/13 09.54 Pagina 32

33
SAFETY
DEVICESCORRECT USE
OF THE VEHICLE WARNING
LIGHTS AND
MESSAGESIN AN
EMERGENCYVEHICLE
MAINTENANCETECHNICAL
SPECIFICATIONSINDEX DASHBOARD
AND CONTROLS
MANUAL CLIMATE
CONTROL SYSTEM (for versions/markets, where provided)
CONTROLS fig. 46
Air distribution slider A μ
to convey air to the centre and side
vents;
∑
to warm the feet and convey cooler
air to the dashboard vents, in inter-
mediate temperature conditions;
∂
to heat with outside harsh tempera-
ture: to convey as much air as possi-
ble to the feet;
∏
to warm the feet and at the same time
demist the windscreen;
-
for quick windscreen demisting.
Fan activation /speed adjustment
knob B
0= fan off
1-2-3= fan speed
4 -
p
= max. fan speed AIR RECIRCULATION fig. 44
Turn this function on by pressing button
Ω
.
This function is particularly useful when
the outside air is heavily polluted (in a traf-
fic jam, tunnel etc.). However, it is better
not to use it for long periods, especially
if there are several people in the vehicle.IMPORTANT The inside air recirculation
system makes it possible to reach the re-
quired “heating” or “cooling” conditions
faster.
Do not use the air recirculation function
on rainy/cold days as it would consider-
ably increase the possibility of the win-
dows misting inside.
020-082 SCUDO LUM GB 19/11/13 09.54 Pagina 33