vacuum FORD MUSTANG 2003 Repair Manual

FORD MUSTANG 2003 Repair Manual MUSTANG 2003 FORD FORD https://www.carmanualsonline.info/img/11/56942/w960_56942-0.png FORD MUSTANG 2003 Repair Manual

Page 1279 of 4378

FORD MUSTANG 2003 Repair Manual 16. Disconnect the vacuum line to the fuel pressure sensor.  Item  Part Number  Description 
1  — To crankshaft position sensor 
2  — To A/C compressor 
3  — To radio ignition interference capac

Page 1335 of 4378

FORD MUSTANG 2003 Repair Manual 86. Position the throttle body and install the bolts, tighten in the sequence shown. 
87. Connect the vacuum line to the fuel pressure sensor. 
88. Connect the PCV hose. 
89. Connect the PCV hose to t

Page 1336 of 4378

FORD MUSTANG 2003 Repair Manual 90. Connect the EGR tube to the EGR valve. 
91. Install the EGR vacuum regulator solenoid. 
1. Install the vacuum hoses. 
2. Install the electrical connector. 
3. Install the bolts. 
92. Connect the h

Page 1338 of 4378

FORD MUSTANG 2003 Repair Manual 96. Install the RH and LH special tools. 
97. Using the special tool, remove the engine from the stand. 
98. Using the special tool, install the crankshaft rear main seal. 
�zLubricate the oil seal us

Page 1361 of 4378

FORD MUSTANG 2003 Repair Manual 61. Connect the vacuum line to the fuel pressure sensor. 
62. Install the positive crankcase ventilation (PCV) valve and hose as an assembly. 
63. Connect the PCV hose to the base of the throttle body

Page 1362 of 4378

FORD MUSTANG 2003 Repair Manual 65. Install the EGR vacuum regulator solenoid. 
1. Install the vacuum lines. 
2. Install the electrical connector. 
3. Install the bolts. 
66. Connect the hoses from the differential pressure feedback

Page 1363 of 4378

FORD MUSTANG 2003 Repair Manual 69. Install the engine control sensor wiring. 
Item  Part Number  Description 
1  — To crankshaft position sensor 
2  — To A/C compressor 
3  — To radio ignition interference capacitor (2) 
4  â

Page 1376 of 4378

FORD MUSTANG 2003 Repair Manual 40. Connect the heater water hoses. 
41. Connect the climate control vacuum supply lines. 
42. Position the cables and install the bracket. 
43. Connect the throttle cable, speed control actuator cabl

Page 1383 of 4378

FORD MUSTANG 2003 Repair Manual a 
Refer to the procedure.  Oil pan-to-
engine front cover bolts  a  — — —
Oil pump-
to-cylinder block bolt  10  — 89 
Radio ignition interference capacitor bolts  25  18  —
Oil pump screen

Page 1388 of 4378

FORD MUSTANG 2003 Repair Manual Item  Part Number  Description 
1  6F066  Supercharger assembly 
2  N806154  Screws (2 reqd) 
3  9F715  Idle air control valve 
4  — Idle air control valve gasket 
5  9P697  Spacer assembly 
6  9E9