vacuum FORD MUSTANG 2003 Manual Online

12. Disconnect the throttle position (TP) sensor and the idle air control (IAC) valve electrical
connectors.
13. Disconnect the vacuum hose.
14. Disconnect the A/C pressure switch electrical connector.
15. Disconnect the fuel tube spring lock coupling. For additional information, refer to Section 310 -
00 . Klj . 3 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

20. Disconnect the 16-
pin and the 42-pin connectors.
21. Disconnect the vacuum hoses.
22. Separate the wiring harness from the dash panel.
23. Disconnect the heater hoses.
24. Disconnect the radiator upper hose, radiator lower hose and the supercharger degas hose. Klj . 5 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

4. Remove the bolts and the rear seal retainer plate.
5. Mount the engine on a workstand.
6. Remove the special tools.
7. Remove the drain plug and drain the engine coolant.
8. Disconnect the electrical connectors from the fuel pulse damper, exhaust gas recirculation
(EGR) vacuum regulator solenoid, supercharger bypass vacuum solenoid, and the differential Klj . 3 ba
232003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

pressure feedback EGR system.
9. Disconnect the vacuum hoses from the differential pressure feedback EGR system.
10. Disconnect the vacuum hoses from the supercharger bypass vacuum solenoid and the actuator.
11. Disconnect the vacuum hoses from the fuel pulse damper and the EGR vacuum regulator solenoid.
12. Disconnect the vacuum hose from the EGR valve. Klj . 4 ba
232003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

13. Disconnect the vacuum hoses at the back of the supercharger and remove the vacuum
harness.
14. Remove the vacuum accessory bracket mounting nut.
15. Remove the mounting bolts and the vacuum accessory bracket. 16. Remove the positive crankcase ventilation (PCV) valve. Klj . 5 ba
232003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

86. Tighten the EGR tube to the exhaust manifold.
87. Connect the barometric pressure (BARO) sensor electrical connector.
88. Install and connect the positive crankcase ventilation (PCV) hose.
89. Install the PCV valve.
90. Install the vacuum accessory bracket and the mounting bolts. Klj . 30 ba
352003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

91. Install the vacuum accessory bracket mounting nut.
92. Position the vacuum harness and connect the vacuum hoses to the back of the supercharger.
93. Connect the vacuum hose to the EGR valve.
94. Connect the vacuum hoses to the fuel pulse damper and the EGR vacuum regulator solenoid. Klj . 31 ba
352003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

95. Connect the vacuum hoses to the supercharger bypass vacuum solenoid and the actuator.
96. Connect the vacuum hoses to the differential pressure feedback EGR system.
97. Connect the electrical connectors to the fuel pulse damper, EGR vacuum regulator solenoid,
supercharger bypass vacuum solenoid, and the differential pressure feedback EGR system. 98. Install the drain plug. Klj . 32 ba
352003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

43. Connect the radiator upper hose, the radiator lower hose and the supercharger degas hose.
44. Connect the heater hoses.
45. Install the wiring harness to the dash panel.
46. Connect the vacuum hoses. Klj . 12 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...

51. Connect the accelerator controls.
zConnect the accelerator cable.
z If equipped, connect the speed control cable.
52. Connect the fuel tube spring lock coupling. For additional information, refer to Section 310 - 00 .
53. Connect the A/C pressure switch electrical connector.
54. Connect the vacuum hose. Klj . 14 ba
172003 Mustang Workshop Manual
17. 11. 2011file:///C:/Ford/2000 - 2004/tsocache/SHEF_4464/S3B~us~en~ ...