differential FORD MUSTANG 2013 5.G Boss 302 Supplement Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 2013, Model line: MUSTANG, Model: FORD MUSTANG 2013 5.GPages: 32, PDF Size: 0.68 MB
Page 6 of 32
UNIQUE FEATURES
Boss302
•Boss302 high performance V8 engine
•Forged pistons and rods
•Runners in the box intake manifold
•CNC machined high-flow ported aluminum cylinder heads
•Steel-backed high RPM clutch
•Unique steering tuning
•Unique chassis tuning with manually-adjustable dampers
•Brembo four-piston front brakes with unique high-performance rear
brake pads
•Low expansion brake hoses
•Unique upper grille with removable foglight delete covers
•Unique low-gloss black reflective hood and body side stripes
•Boss302 interior package with unique interior finish panels and
instrument cluster with TFT screen and Mustang Track Apps (Recaro
seats optional)
•Quad exhaust with rear and side exiting pipes
•Unique staggered width 19x9 inch and 19x9.5 inch wheels with
summer only performance tires
•3.73 rear axle ratio with limited slip (optional Torsendifferential)
•High performance radiator and engine oil cooler
•AdvanceTracstability enhancement system with sport mode
specifically calibrated and race track tuned. Refer to theDriving
section in yourOwner’s Manualfor more information.
•
- After delivery, your Ford dealer can reprogram your
engine control module to use the red key as a
. Once
enabled, the
provides optimal racetrack performance via
a unique engine calibration. See http://www.trackey.ford.com for more
information.
Boss302 Unique Features
6
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)
Page 7 of 32
Boss302 with Laguna SecaPackage
•Unique Laguna Secachassis tuning with manually-adjustable dampers
•Unique steering tuning
•Rear seat delete (creating a two-seat configuration) with added brace
for improved body stiffness
•Boss302 interior package with standard Recaroseats
•Unique staggered width 19x9 inch and 19x10 inch wheels with
R-compound summer only performance tires
•3.73 rear axle ratio with standard Torsendifferential
•Unique Sterling Grey body/interior accents
•Unique lower grille featuring larger hex pattern (only on the Laguna
Seca)
•Unique low-gloss metallic grey reflective hood and body side stripes
•Additional Ford Racing parts
•Front splitter (track use only - see Warranty information for more
details) The front splitter included in the Laguna SecaPackage is
intended for race track use only and is not legal for on-street
driving. It may degrade crash performance and void the vehicle
warranty. The front splitter must be installed by the customer.
•Front brake cooling kit
•Transmission cooling scoop
Boss302 Unique Features
7
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)
Page 11 of 32
SUSPENSION
•MacPherson strut with L-arm front suspension
•8.8 inch solid rear axle with limited slip differential (3.73:1 ratio)
Boss302:
•34.6 x 4.4 mm tubular front stabilizer bar
•25.0 mm solid rear stabilizer bar
•Tokico twin tube adjustable shocks and struts
•26.0 N/mm front and 32.4 N/mm rear coil springs
Boss302 with Laguna Secapackage:
•34.6 x 4.4 mm tubular front stabilizer bar
•26.0 mm solid rear stabilizer bar
•Tokico twin tube adjustable shocks and struts
•24.0 N/mm front and 33.5 N/mm rear coil springs
ADJUSTABLE SUSPENSION DAMPERS
Your vehicle has adjustable
suspension dampers. The
adjustment controls are located on
top of the damping rods and can be
adjusted with a small screwdriver.
Remove the cap to access the
control for the front strut.
To access the rear shock, pull the
carpet back in the trunk area. Then,
lift the trim panel and pull rearward
to expose the adjustable suspension
damper.
1
2
3
4
5
Chassis
11
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)
Page 20 of 32
Flatbed
The following diagram illustrates the maximum ramp angle allowable to
load your vehicle on a flatbed. Vehicle damage may occur with greater
angles.
A. 36 in. (91 cm) 4x4 loading block
B. 18 in. (45.72 cm) 4x4 loading block
C. 11.5° maximum
Securing the rear of the vehicle
For flatbed towing, secure the rear
of the vehicle by using axle straps
or lasso straps around the rear axle.
One strap is required on each side
of the differential.Note:Using the
standard T-slot attachment can
damage the side exiting exhaust.
C
B
A
Roadside Emergencies
20
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)
Page 22 of 32
MOTORCRAFT PART NUMBERS
Component Boss 302 engine
Engine drivebelt JK6-678
Lightweight battery BXT-96R-500
ENGINE OIL RECOMMENDATION
Use MotorcraftSAE 5W-50 full synthetic or an equivalent SAE 5W-50
full synthetic oil meeting Ford specification WSS-M2C931-B.
Do not use supplemental engine oil additives, cleaners or other engine
treatments. They are unnecessary and could lead to engine damage that
is not covered by Ford warranty.
Change your engine oil and filter according to the appropriate schedule
listed in thescheduled maintenance information.
DRIVETRAIN
Item Description
Rear axle8.8 in. solid rear axle with limited-slip
differential 3.73:1 ratio
Driveshaft2-piece steel
TransmissionMT82 6-speed manual with integral clutch
housing
Gear ratiosGear Ratio
1st 3.66
2nd 2.43
3rd 1.69
4th 1.31
5th 1.00
6th 0.65
Reverse 3.32
Maintenance
22
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)
Page 28 of 32
TRACK PREPARATION
The Boss302 and Boss302 Laguna Secaedition have been rigorously
proven out on race tracks. Below are recommendations for optimizing
your Boss302 for a track day event.
•For optimal performance, premium fuel is recommended.
•Change brake fluid to Super DOT 4 to improve track performance of
braking system (WSS-M6C65-A2), Ford part number (YS4Z-19542-
AA).
•Install Ford Racing front brake cooling kit (M-2004-MB) to improve
brake cooling (standard on Laguna Secaedition).
•Remove rear brake dust shields to improve brake cooling.
•Install Ford Racing transmission cooling scoop (M-5025-MBR) to
improve transmission cooling (standard on Laguna Secaedition).
•During extended track sessions in extreme temperatures or
conditions, your Boss 302 may require additional engine cooling
actions. If the water temperature warning light illuminates, return to
the paddock and let the vehicle return to normal operating
temperature while idling before turning the engine off. Prior to the
next session, remove the round fog light delete covers from the upper
grille. This wi ll allow more cooling air to the radiator and allow the
car to run extended sessions in extreme heat. Visit fordracing.com for
additional parts to further enhance the powertrain cooling on your
Boss 302.
•For extended track use, Ford recommends installing a rear differential
cooler to improve rear axle cooling.
•The Ford Racing front splitter kit (M-16601P-MBA, standard on
Laguna Secaedition) can be installed to improve high-speed vehicle
stability and handling. If the Ford Racing front splitter kit will be
installed on a Boss 302 without the Laguna Secapackage, Ford
recommends installing the Laguna Secaedition rear spoiler in place
of the standard rear spoiler to maintain aerodynamic balance. The
unique lower grille from the Laguna Secaedition should also be
installed to accommodate the splitter support rods. This front splitter
is intended for race track use only and is not legal for on-street
driving. It may degrade crash performance and void the vehicle
warranty. The front splitter must be installed by the customer.
Track Use Preparation
28
2013 05+ Mustang(197)
Supplement, 1st Printing
USA(fus)