keyless FORD MUSTANG 2015 6.G Quick Reference Guide

3 Information Display
Provides information about
various systems on your vehicle.
Use the left-hand, 5-way controls
located on the steering wheel
to choose and confirm settings
and messages. Refer to the
Information Displays chapter
of your
Owner’s Manual for
more information.
4
Service Engine
Soon Light
Lights briefly when you switch
the ignition on. If it remains on
or is blinking after you start the
engine, the On-Board Diagnostics
(OBD-II) system has detected a
malfunction. Drive in a moderate
fashion (avoid heavy acceleration
and deceleration) and contact
an authorized dealer as soon
as possible.
5 Push-button Start
Allows you to start your vehicle
by pressing the ENGINE START
STOP button while fully pressing
down on the brake pedal. If your
vehicle has been idling for an
extended period of time, it will automatically shut down. Before
the engine shuts down, a message
appears in the information
display, allowing the driver to
override the shutdown feature.
Press the button again to switch
the engine off.
Note: Your intelligent access
transmitter must be inside the
vehicle for the ignition to start.
Keyless warning alert sounds the
horn twice when you exit the
vehicle with the intelligent access
transmitter and the keyless
vehicle is in RUN, indicating the
vehicle is still on.
6
Steering Wheel
Media Controls
Press VOL+ or VOL– to increase or
decrease volume levels.
Press
or to access the previous
or next radio station, CD track or
preset satellite radio channel.
Press M repeatedly to access all
possible media sources.
Press
to access SYNC® voice
recognition*.
Press
to access SYNC phone
features or to answer a call.
Press
to end a call.
1
2
3
4
5
6
1 Lighting Control
Switches off the headlamps.

Switches on the parking, instrument panel,
license plate and tail lamps.
Switches on the headlamps.
Autolamps* automatically switch the exterior
lamps on or off based on available daylight.

Switch the fog lamps* on or off by pressing
the control.
2 Cruise Control
Lets you maintain a set speed without keeping your foot
on the accelerator pedal. You can use cruise control when
your vehicle speed is greater than 20 mph (30 km/h).
To use, accelerate to the desired speed. Press and release
SET+, then take your foot off of the accelerator pedal.
Adaptive cruise control* automatically adjusts your
speed to maintain a set distance between your vehicle and
the vehicle in front of you in the same lane. You can set
the gap distance between your vehicle and the vehicle in
front of you by pressing the SET+ and SET– buttons on
the steering wheel.
Note: Driving aids do not replace the need to watch where
the vehicle is moving and brake where necessary. Refer to
the
Cruise Control chapter of your Owner’s Manual for
safety information, more details and limitations.
INSTRUMENT PANEL
4
5*if equipped*if equipped