ignition FORD RANGER 1997 2.G User Guide

Instrumentation
21
[IS09200(R)01/96]
7-1/2 pica art:0020540-E
Engine oil pressure gauge Ð mechanical cluster with tachometer
%*
[IS09300(R)05/96]
High Beam Light
*
[IS09350(R)01/96]
This light comes on when the headlamps are turned on high
beam or when you flash the lights. If your vehicle is equipped
with daytime running lights and you have your headlamps on,
your high beam light will not illuminate when you flash the
lights.
[IS09400(R)01/96]
6 pica art:0021266-A
High beam indicator light symbol
%*
[IS09500(R)03/96]
ªHeadlamps Onº Alert Chime
[IS09510(R)01/96]
This chime sounds if you open the driver's door while the
headlamps or parking lamps are on, and the key is removed
from the ignition.
%*
[IS09550(R)03/96]
Ignition Key Buzzer or Chime
*
[IS09570(R)05/96]
The buzzer or chime will sound if you open the driver's door
while the key is in the ignition and in the OFF, LOCK, or
ACCESSORY position. Never leave your vehicle unattended
with the key in the ignition.
File:03unisr.ex
Update:Thu Mar 20 09:21:14 1997

22
%*
[IS09600(R)05/96]
Fuel Gauge
*
[IS09700(R)01/96]
The fuel gauge displays approximately how much fuel is in the
fuel tank only when the ignition switch is ON.
*
[IS09850(R)01/96]
For a proper fuel gauge indication after adding fuel, the ignition
switch should be in the OFF position while the vehicle is being
refueled.
*
[IS09860(R)01/96]
The fuel gauge indicator may vary slightly when the vehicle is
in motion.
*
[IS09875(R)01/96]
With ignition switch OFF, the fuel gauge indicator may drift
from the ignition switch ON position.
[IS10200(R)01/96]
6 pica art:0020063-D
Fuel gauge Ð mechanical cluster
[IS10300(R)01/96]
6 pica art:0020752-E
Fuel gauge Ð mechanical cluster with tachometer
%*
[IS11100(R)03/96]
Engine Coolant Temperature Gauge
*
[IS11201(R)01/96]
This gauge tells you the temperature of the engine coolant, not
the coolant level. If the coolant is not at its proper level or
mixture, the gauge indicator will not be accurate.
File:03unisr.ex
Update:Thu Mar 20 09:21:14 1997

28
[AS29217(R)05/96]
Stereo Cassette with CD DJ Compatibility
*
[AS29220(R)03/96]
Using the Controls on Your New Radio
*
[AS29225(R)03/96]
How to turn the radio on and off
*
[AS29230(R)01/95]
Press the ªVOL/PUSHº knob to turn the radio on. Press again
to turn it off.
*
[AS29235(R)03/96]
How to adjust the volume
[AS29240(R)06/95]
Turn the ªVOL/PUSHº knob clockwise to increase the volume
and counterclockwise to decrease the volume. Bars illuminate in
the display to show relative volume level.
*
[AS29245(R)02/96]
NOTE: If the volume level is set above a certain listening
level when the ignition switch is turned off, when the
ignition switch is turned back on, the volume will
come back to a ªnominalº listening level. However, if
the radio power is turned off, the volume will remain
in the position it was set at when radio power was
switched off.
*
[AS29250(R)03/96]
Selecting the AM or FM frequency band
*
[AS29255(R)02/95]
Push the ªAM/FMº button to select the desired frequency band
or to stop/store cassette tape (when in cassette mode). Pushing
the button more than once will alternate between AM, FM1 and
FM2. These functions are used with the station memory buttons
described underHow to tune radio stations.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997

32
*
[AS29435(R)04/96]
Using the Controls of Your Cassette Tape Player
(If equipped)
*
[AS29440(R)09/95]
NOTE: Radio power must be on to use the cassette tape
player.
*
[AS29445(R)08/95]
How to insert a tape
*
[AS29450(R)04/95]
Your cassette tape player is equipped with power loading. Once
you insert a tape and push slightly (with theopen edge to the
right), the loading mechanism draws the tape the rest of the
way in and play will begin after a momentary tape tightening
process. Display indicates ªTAPEº while tape is playing.
*
[AS29455(R)06/95]
NOTE: A cassette tape can be loaded with the ignition on
whether or not the radio power is on. However, with
radio power off, the cassette tape is loaded and stored.
*
[AS29465(R)12/95]
How to locate a desired track on the tape
*
[AS29470(R)08/95]
There are four ways to quickly locate a desired selection on the
tape. You can use the fast forward, rewind, ªSEEKº or ªSCANº
function. Following are brief descriptions of each.
*
[AS29475(R)09/95]
n
Fast forwarding the tape
*
[AS29480(R)01/95]
To fast forward the tape, press the ªFFº button. The radio
will begin playing until fast forward is manually stopped (by
pushing the ªTAPEº button) or the end of the tape is
reached.
*
[AS29485(R)01/95]
At the end of the tape, the direction automatically reverses
and plays the other side of the tape.
*
[AS29490(R)08/95]
n
Rewinding the tape
*
[AS29495(R)01/95]
To rewind the tape, press the ªREWº button. The radio will
begin playing until rewind is manually stopped (by pushing
the ªTAPEº button) or the beginning of the tape is reached.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997

Electronic Sound Systems
33
*
[AS29505(R)08/95]
n
Using the ªSEEKº function with your cassette tape player
*
[AS29510(R)03/96]
While in the tape mode, push the right
aside of the
ªSEEKº button to seek forward to the next selection on the
tape. Push the left
bside to seek the previous tape
selection.
*
[AS29515(R)08/95]
n
Using the ªSCANº function with your cassette tape player
*
[AS29520(R)01/95]
Press the ªSCANº button to begin the forward scan mode on
the tape currently playing, stopping on each tape selection
for approximately an eight-second sampling (display
indicates ªSCº).
*
[AS29525(R)01/95]
To stop the scan mode on the presently sampled tape
selection, press ªSCANº a second time.
*
[AS29530(R)08/95]
n
How to change the side of the tape being played
*
[AS29535(R)01/95]
The alternate side of the tape can be selected by pressing the
ªSIDE 1-2º button.
*
[AS29540(R)08/95]
How to eject the tape
*
[AS29545(R)01/95]
To stop the tape and eject the cassette, press the ªEJº button.
The radio will resume playing if the radio power is on. The
tape cartridge can be ejected with radio power (and/or ignition)
on or off.
[AS29550(R)06/95]
How to switch from tape to AM/FM mode
*
[AS29555(R)01/95]
Press the ªAM/FMº button to stop the tape player and resume
radio play.
*
[AS29560(R)02/96]
Using the DolbyHB noise reduction feature
*
[AS29565(R)09/95]
NOTE: Noise reduction system manufactured under license
from Dolby Labs Licensing Corporation. ªDolbyº and
double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997

Electronic Sound Systems
35
[AS29710(R)09/95]
NOTE: With the ignition off, the clock will display for
approximately 5 seconds once the ªCLKº button is
depressed and released.
*
[AS29715(R)05/96]
How to set the clock
*
[AS29720(R)05/96]1.
Turn the radio on.
[AS29725(R)05/96]2.
Press and hold the ªCLKº button, press the right (
a) side of
the ªSEEKº button to increase hours. Press the left (
b) side
of the button to decrease hours. Press the right (
a) side of
the ªTUNEº button to increase minutes. Press the left (
b)
side of the button to decrease minutes.
*
[AS29730(R)05/96]
NOTE: The clock displays 12-hour time with no AM/PM
indications.
[AS29735(R)09/94]
Ford 6-CD Changer (If equipped)
[AS29745(R)03/95]
The Ford Ranger (Regular Cab) 6-CD Changer is mounted
behind the driver's seat. The Ford Ranger (SuperCab) 6-CD
Changer is mounted on the floor near the center of the rear cab
wall. Both changers are controlled with buttons on the Audio
System.
[AS29750(R)10/94]
Unit Loading Instructions
[AS29755(R)06/95]1.
Open Compact Disc Changer unit by sliding door rearward
(Figure 1).
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997

46
[AS29969(R)05/96]
Electronic Search, Search Cassette Radio,
and Search Single Disc CD Radio
*
[AS29970(R)03/96]
Using the Controls on Your New Radio
*
[AS29972(R)03/96]
How to turn the radio on and off
*
[AS29973(R)03/96]
Press the ªVOL/PUSH ONº knob to turn the radio on. Press
again to turn it off.
*
[AS29975(R)03/96]
How to adjust the volume
[AS29980(R)06/95]
Turn the ªVOL/PUSH ONº knob clockwise to increase the
volume and counterclockwise to decrease the volume. Bars
illuminate in the display to show relative volume level.
*
[AS29985(R)02/96]
NOTE: If the volume level is set above a certain listening
level when the ignition switch is turned off, when the
ignition switch is turned back on, the volume will
come back to a ªnominalº listening level. However, if
the radio power is turned off, the volume will remain
in the position it was set at when radio power was
switched off.
*
[AS29990(R)03/96]
Selecting the AM or FM frequency band
[AS29995(R)10/94]
Push the ªAMº/FMª button to select the desired frequency
band or to stop/store cassette tape (when in cassette mode).
These functions are used with the station memory buttons
described underHow to tune radio stations.
%*
[AS30000(R)03/96]
How to tune radio stations
[AS30005(R)04/95]
There are four ways for you to tune in a particular station. You
can manually locate the station using the ºTUNEª button,
ºSEEKª button, ºSCANª button, or select the station by using
the memory buttons, which you can set to any desired
frequency. These four methods are described below.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997

Electronic Sound Systems
49
*
[AS30130(R)10/95]
NOTE: Illuminated bars in the display show relative levels of
bass and treble, and positions of speaker balance and
fader functions (left to right, front to rear).
*
[AS30135(R)04/96]
Using the Controls of Your Cassette Tape Player
(If equipped)
*
[AS30140(R)09/95]
NOTE: Radio power must be on to use the cassette tape
player or eject a tape.
*
[AS30145(R)08/95]
How to insert a tape
*
[AS30150(R)09/94]
Your cassette tape player is equipped with power loading. Once
you insert a tape and push slightly (with theopen edge to the
right), the loading mechanism draws the tape the rest of the
way in and play will begin after a momentary tape tightening
process.
*
[AS30155(R)09/95]
NOTE: A cassette tape can be loaded and stored with the
ignition and radio power off.
*
[AS30165(R)12/95]
How to locate a desired track on the tape
*
[AS30170(R)09/94]
There are four ways to quickly locate a desired selection on the
tape. You can use the fast forward, rewind, ºSEEKª, or ºSCANª
function. Following are brief descriptions of each.
*
[AS30175(R)09/95]
n
Fast forwarding the tape
*
[AS30180(R)01/95]
To fast forward the tape, press the ºFFª button. The radio
will begin playing until fast forward is manually stopped (by
pushing the ºTAPEª button) or the end of the tape is
reached.
*
[AS30185(R)01/95]
At the end of the tape, the direction automatically reverses
and plays the other side of the tape.
*
[AS30190(R)08/95]
n
Rewinding the tape
*
[AS30195(R)01/95]
To rewind the tape, press the ºREWª button. The radio will
begin playing until rewind is manually stopped (by pushing
the ºTAPEª button) or the beginning of the tape is reached.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997

50
*
[AS30200(R)08/95]
n
Using the ºSEEKª function with your cassette tape player
*
[AS30205(R)03/96]
While in the tape mode, push the right
aside of the
ºSEEKª button to seek forward to the next selection on the
tape. Push the left
bside to seek the previous tape
selection.
*
[AS30210(R)08/95]
n
Using the ºSCANª function with your cassette tape player
*
[AS30215(R)01/95]
Press the ºSCANª button to begin the forward scan mode on
the tape currently playing, stopping on each tape selection
for approximately an eight-second sampling (display
indicates ºSCª).
*
[AS30220(R)01/95]
To stop the scan mode on the presently sampled tape
selection, press ºSCANª a second time.
*
[AS30225(R)08/95]
n
How to change the side of the tape being played
*
[AS30230(R)01/95]
The alternate side of the tape can be selected by pressing the
ºSIDE 1-2ª button.
*
[AS30235(R)08/95]
How to eject the tape
*
[AS30240(R)01/95]
To stop the tape and eject the cassette, press the ºEJª button.
The radio will resume playing if the radio power is on. The
tape cartridge can be ejected with radio power (and/or ignition)
on or off.
[AS30245(R)06/95]
HowtoswitchfromtapetoAM/FMmode
*
[AS30247(R)01/95]
Press the ºAM/FMª button to stop the tape player and resume
radio play.
*
[AS30250(R)02/96]
Using the DolbyHB noise reduction feature
*
[AS30255(R)09/95]
NOTE: Noise reduction system manufactured under license
from Dolby Labs Licensing Corporation. ºDolbyª and
double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997

Electronic Sound Systems
53
[AS30480(R)05/96]
How to stop and restart the CD player
[AS30490(R)05/96]
When a disc is loaded, the unit automatically enters the play
mode. To stop temporarily, press the ºAM/FMª button. The
stop indicator (
X) in the display illuminates and operation
returns to the radio mode. To resume CD play, press the ºCDª
button.
[AS30500(R)05/96]
NOTE: If the ignition key is turned to OFF during play and
then is turned to the ON or ACCESSORY position,
the CD player will resume playing in the mode it was
in when the ignition was turned off.
[AS30510(R)05/96]
Using the ºSEEKª feature
*
[AS30520(R)05/96]
The ºSEEKª feature allows you to quickly find a particular
selection on the disc.
[AS30530(R)05/96]
Press (
b) once to repeat the current playing selection. Press
(
a) to advance to the next selection. If the (
a) button is
pressed during the last selection on the CD, the CD will
advance to the first track on the disc.
[AS30540(R)05/96]
Pressing and holding the (
b)or(
a) button will scroll
backward and forward respectively through the tracks.
[AS30550(R)05/96]
Using the ºSCANª function
[AS30560(R)05/96]
The ºSCANª function allows you to briefly sample all tracks on
a disc.
[AS30570(R)05/96]
Press the ºSCNª button to enter the scan mode. The scan mode
causes the CD to advance to the next track, play for 8 seconds,
and then advance to the next track. This continues until the
ºSCNª button is pressed a second time, the ºCDª button is
pressed, or a different tuning function is selected.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997