INFINITI FX35 2005 Service Manual
FX35 2005
INFINITI
INFINITI
https://www.carmanualsonline.info/img/42/57020/w960_57020-0.png
INFINITI FX35 2005 Service Manual
Trending: wheelbase, fuel pressure, reset sun roof, fuse, maintenance reset, tire size, wheel alignment
Page 3611 of 4731
LAN-192
[CAN]
CAN SYSTEM (TYPE 4)
Revision: 2005 July 2005 FX
Case 13
Check LDW camera unit circuit. Refer to LAN-207, "LDW Camera Unit Circuit Inspection" .
PKIB4393E
PKIB4267E
Page 3612 of 4731
CAN SYSTEM (TYPE 4) LAN-193
[CAN]
C
D E
F
G H
I
J
L
M A
B
LAN
Revision: 2005 July 2005 FX
Case 14
Check unified meter and A/C amp. circuit. Refer to LAN-208, "Unified Meter and A/C Amp. Circuit Inspection" .
PKIB4394E
PKIB4268E
Page 3613 of 4731
LAN-194
[CAN]
CAN SYSTEM (TYPE 4)
Revision: 2005 July 2005 FX
Case 15
Check ICC sensor circuit. Refer to LAN-208, "ICC Sensor Circuit Inspection" .
PKIB4395E
PKIB4269E
Page 3614 of 4731
CAN SYSTEM (TYPE 4) LAN-195
[CAN]
C
D E
F
G H
I
J
L
M A
B
LAN
Revision: 2005 July 2005 FX
Case 16
Check ABS actuator and electric unit (control unit) circuit. Refer to LAN-209, "ABS Actuator and Electric Unit
(Control Unit) Circuit Inspection" .
PKIB4396E
PKIB4270E
Page 3615 of 4731
LAN-196
[CAN]
CAN SYSTEM (TYPE 4)
Revision: 2005 July 2005 FX
Case 17
Check driver seat control unit circuit. Refer to LAN-209, "Driver Seat Control Unit Circuit Inspection" .
PKIB4397E
PKIB4271E
Page 3616 of 4731
CAN SYSTEM (TYPE 4) LAN-197
[CAN]
C
D E
F
G H
I
J
L
M A
B
LAN
Revision: 2005 July 2005 FX
Case 18
Check IPDM E/R circuit. Refer to LAN-210, "IPDM E/R Circuit Inspection" .
PKIB4398E
PKIB4272E
Page 3617 of 4731
LAN-198
[CAN]
CAN SYSTEM (TYPE 4)
Revision: 2005 July 2005 FX
Case 19
Check CAN communication circuit. Refer to LAN-211, "CAN Communication Circuit Inspection" .
PKIB4399E
Page 3618 of 4731
CAN SYSTEM (TYPE 4) LAN-199
[CAN]
C
D E
F
G H
I
J
L
M A
B
LAN
Revision: 2005 July 2005 FX
Case 20
Check IPDM E/R ignition relay circuit continuously sticks “OFF”. Refer to LAN-218, "IPDM E/R Ignition Relay
Circuit Inspection" .
PKIB4400E
Page 3619 of 4731
LAN-200
[CAN]
CAN SYSTEM (TYPE 4)
Revision: 2005 July 2005 FX
Case 21
Check IPDM E/R ignition relay circuit continuously sticks “ON”. Refer to LAN-218, "IPDM E/R Ignition Relay
Circuit Inspection" .
Inspection Between TCM and Data Link Connector CircuitAKS00CDQ
1. CHECK HARNESS FOR OPEN CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Disconnect ECM connector and harness connector M82.
4. Check continuity between harness connector M82 terminals 14H (L), 15H (R) and data link connector M5 terminals 6 (L), 14
(R).
OK or NG
OK >> Connect all the connectors and diagnose again. Refer to LAN-7, "
TROUBLE DIAGNOSES WORK FLOW" .
NG >> Repair harness.
PKIB4401E
14H (L) - 6 (L) : Continuity should exist.
15H (R) - 14 (R) : Continuity should exist.
SKIA6861E
Page 3620 of 4731
![INFINITI FX35 2005 Service Manual CAN SYSTEM (TYPE 4) LAN-201
[CAN]
C
D E
F
G H
I
J
L
M A
B
LAN
Revision: 2005 July 2005 FX
Inspection Between Data Link Connector and Unified Meter and A/C Amp. Cir-
cuit
AKS00CDR
1. CHEC INFINITI FX35 2005 Service Manual CAN SYSTEM (TYPE 4) LAN-201
[CAN]
C
D E
F
G H
I
J
L
M A
B
LAN
Revision: 2005 July 2005 FX
Inspection Between Data Link Connector and Unified Meter and A/C Amp. Cir-
cuit
AKS00CDR
1. CHEC](/img/42/57020/w960_57020-3619.png)
CAN SYSTEM (TYPE 4) LAN-201
[CAN]
C
D E
F
G H
I
J
L
M A
B
LAN
Revision: 2005 July 2005 FX
Inspection Between Data Link Connector and Unified Meter and A/C Amp. Cir-
cuit
AKS00CDR
1. CHECK HARNESS FOR OPEN CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Disconnect ECM connector and unified meter and A/C amp. connector.
4. Check continuity between data link connector M5 terminals 6 (L), 14 (R) and unified meter and A/C amp. harness connector
M55 terminals 1 (L), 11 (R).
OK or NG
OK >> Connect all the connectors and diagnose again. Refer to LAN-7, "
TROUBLE DIAGNOSES WORK FLOW" .
NG >> Repair harness.
Inspection Between Unified Meter and A/C Amp. and ABS Actuator and Electric
Unit (Control Unit) Circuit
AKS00CDS
1. CHECK CONNECTOR
1. Turn ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check following terminals and connectors for damage, bend and loose connection (connector side and harness side).
–Harness connector M41
–Harness connector E211
OK or NG
OK >> GO TO 2.
NG >> Repair terminal or connector.
2. CHECK HARNESS FOR OPEN CIRCUIT
1. Disconnect unified meter and A/C amp. connector and harness connector M41.
2. Check continuity between unified meter and A/C amp. harness connector M55 terminals 1 (L), 11 (R) and harness connector
M41 terminals 15G (L), 14G (R).
OK or NG
OK >> GO TO 3.
NG >> Repair harness. 6 (L) - 1 (L) : Continuity should exist.
14 (R) - 11 (R) : Continuity should exist.
SKIA6862E
1 (L) - 15G (L) : Continuity should exist.
11 (R) - 14G (R) : Continuity should exist.
SKIA6863E
Trending: night vision, Steering wheel lock, radiator, RF roof, radiator cap, Key switch, engine