wiring diagram INFINITI FX35 2005 Owner's Guide

AUDIO AV-17
C
D E
F
G H
I
J
L
M A
B
AV
Revision: 2005 July 2005 FX
Wiring Diagram – AUDIO – / BOSE System With Navigation SystemAKS00CNK
TKWM2074E

AV-26
AUDIO
Revision: 2005 July 2005 FX
Wiring Diagram – AUDIO – / BOSE System Without Navigation SystemAKS00CNM
TKWM2485E

AV-52
AUDIO ANTENNA
Revision: 2005 July 2005 FX
Wiring Diagram — M/ANT —AKS007WF
TKWM0569E

INTEGRATED DISPLAY SYSTEM AV-63
C
D E
F
G H
I
J
L
M A
B
AV
Revision: 2005 July 2005 FX
Wiring Diagram — INF/D — AKS005U4
TKWM1092E

INTEGRATED DISPLAY SYSTEM AV-69
C
D E
F
G H
I
J
L
M A
B
AV
Revision: 2005 July 2005 FX
Wiring Diagram — COMM —AKS005U5
TKWM2437E

AV-106
NAVIGATION SYSTEM
Revision: 2005 July 2005 FX
Wiring Diagram —NAVI—AKS007IT
TKWM2084E

AV-114
NAVIGATION SYSTEM
Revision: 2005 July 2005 FX
Wiring Diagram — COMM —AKS007IU
TKWM2088E

AV-130
NAVIGATION SYSTEM
Revision: 2005 July 2005 FX
7. On the “SELF DIAGNOSIS” screen, each unit name will be col-
ored according to the diagnosis result, as follows.

If several malfunctions are present in a unit, color of its switch
on the screen will be either red, yellow, or gray, determined by
the malfunction of the highest priority.
8. Select a switch on the “SELF DIAGNOSIS” screen and com- ments for the diagnosis results will be shown.

When the switch is green, the following comment will be
shown. “Self-diagnosis was successful. Further diagnosis and
adjustments are recommended. Follow the “confirmation/
adjustments” menu or refer to the service manual.”.

When the switch is yellow, the following comment will be
shown. “Connection to the following unit is abnormal. See the
service manual for further details”.

When the switch is red, the following comment will be shown.
“DCU is abnormal”.
SELF–DIAGNOSIS RESULT
Quick Reference Table
1. Select an malfunctioning diagnosis No. in the diagnosis result quick reference table.
2. Find estimated malfunctioning system in the diagnosis number table and perform check by referring to AV-
11 4 , "Wiring Diagram — COMM —" .
3. Turn the ignition switch OFF and perform self-diagnosis again.
*: DCU = Display control unit
CAUTION:

When A/C and AV switch has a malfunction, self–diagnosis cannot be started.

When display has a malfunction, self–diagnosis cannot be started.

Check the following when the self-diagnosis mode cannot be used.
–AV communication line between display control unit and A/C and AV switch. Refer to AV- 1 5 4 , "AV
Communication Line Check (Between Display Control Unit and A/C and AV Switch)" .
–A/C and AV switch power supply and ground circuit. Refer to AV- 1 4 5 , "Power Supply and Ground
Circuit Check for A/C and AV Switch" .
–Display power supply and ground circuit. Refer to AV- 1 4 4 , "Power Supply and Ground Circuit
Check for Display" .
Green : No malfunctioning.
Yellow : Cannot be judged by self-diagnosis results.
Red : Unit is malfunctioning.
Gray : Diagnosis has not been done.
SKIA4210E
SKIA4211E
Screen switch Diagnosis
No.
Switch color DCU* Display Audio unit Navigation GPS antenna
Red × 1
Ye l l o w xx 2
×× 3
××× 4

AV-132
NAVIGATION SYSTEM
Revision: 2005 July 2005 FX
7. Select a switch on the “SELF DIAGNOSIS” screen and com-
ments for the diagnosis results will be shown.

When the switch is green, the following comment will be
shown. “Self-diagnosis was successful. Further diagnosis and
adjustments are recommended. Follow the “confirmation
adjustments” menu or refer to the service manual.”.

When the switch is yellow, the following comment will be
shown. “Connection to the following unit is abnormal. See the
service manual for further details”.

When the switch is red, the following comment will be shown.
“Center Control Unit is abnormal”.

When the switch is gray, the following comment will be shown. “Self-diagnosis for DVD-ROM DRIVER
of NAVI was not performed because no DVD-ROM was available.”.
SELF–DIAGNOSIS RESULT
Quick Reference Table
1. Select an malfunctioning diagnosis number. in the diagnosis result quick reference table.
2. Find estimated malfunctioning system in the diagnosis number table and perform check by referring to AV-
11 4 , "Wiring Diagram — COMM —" .
3. Turn the ignition switch OFF and perform self-diagnosis again.
*: Navigation = NAVI control unit
CAUTION:

When A/C and AV switch has a malfunction, self–diagnosis cannot be started.

When display has a malfunction, self–diagnosis cannot be started.

Check the following when the self-diagnosis mode cannot be used.
–NAVI control unit power supply and ground circuit. Refer to AV- 1 4 2 , "Power Supply and Ground
Circuit Check for NAVI Control Unit" .
–AV communication line between display control unit and NAVI control unit. Refer to AV- 1 4 9 , "AV
Communication Line Check (Between Display Control Unit and NAVI Control Unit)" .
–AV communication line between display control unit and A/C and AV switch. Refer to AV- 1 5 4 , "AV
Communication Line Check (Between Display Control Unit and A/C and AV Switch)" .
–A/C and AV switch power supply and ground circuit. Refer to AV- 1 4 5 , "Power Supply and Ground
Circuit Check for A/C and AV Switch" .
–Display power supply and ground circuit. Refer to AV- 1 4 4 , "Power Supply and Ground Circuit
Check for Display" .
Self-diagnosis Codes
SKIA4211E
Screen switch
Diagnosis No.
Switch color Navigation* GPS antenna
Red × 1
Gray × 2
Ye l l o w ×
3
× 4
×× 5
Diagnosis
No. Possible cause Reference
page
1 NAVI control unit malfunction AV- 1 8 0
2 No map DVD-ROM is inserted in the NAVI control unit.AV- 1 5 5

AV-184
INFINITI MOBILE ENTERTAINMENT SYSTEM
Revision: 2005 July 2005 FX
Wiring Diagram – MES –AKS007WI
TKWM0595E