INFINITI G37 2012 Owners Manual

Black plate (210,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-32 Monitor, climate, audio, phone and voice recognition systems SAA1527
Type A
1. “ AUTO ” automatic climate control ON
button/Temperature control dial (dri-
ver side)
2. “ A/C ” air conditioner ON/OFF button
3. “
” fan speed increase button
4. “
” front defroster button
5. “ MODE ” manual air flow control but-
ton
6. “ DUAL ” zone control ON/OFF button/
Temperature control dial (passenger
side)
7. “ OFF ” button for climate control sys-
tem 8. “
” fan speed decrease button
9. “ ” rear window defroster button
(See “ Rear window and outside mirror
defroster switch ” (P.2-34).)
10. “
” intake air control button
AUTOMATIC CLIMATE CONTROL
(Type A) GUID-151D8DEB-308A-4CDF-88B6-06B2B74B49FD
Automatic operation GUID-8195D784-259C-4F5D-A82B-8C0A6AA48082
Cooling and/or dehumidified heating
(AUTO): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This mode may be used all year round. The
system works automatically to control the inside temperature, air flow distribution
and fan speed after the preferred tempera-
ture is set manually.
1. Push the “ AUTO ” button on. (The
indicator on the button will illuminate
and AUTO will be displayed.)
2. Turn the temperature control dial (dri-
ver side) to set the desired tempera-
ture. .
The temperature can be set within
the following range.
— For U.S.: 60 to 90 8 F (16 to 32 8 C)
— For Canada: 64 to 90 8 F (18 to
32 8 C) .
The temperature of the passenger
compartment will be maintained
automatically. Air flow distribution
and fan speed will also be controlled
automatically.
3. You can individually set driver and front
passenger side temperature using each
temperature control button. When the
“ DUAL ” button is pushed or the pas-
senger side temperature control button
is turned, the DUAL indicator will come
on. To turn off the passenger side
temperature control, push the “ DUAL ”
button.

Black plate (211,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4. To turn off the climate control system,
push the “ OFF ” button.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction.
Heating (A/C OFF): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The air conditioner does not activate in this
mode. When you need to heat only, use
this mode.
1. Push the “ AUTO ” button on.
2. Push the “ A/C ” button. (The A/C
indicator will turn off.)
3. Turn the temperature control dial to set
the desired temperature.
. The temperature of the passenger
compartment will be maintained auto-
matically. Air flow distribution and fan
speed are also controlled automati-
cally.
. Do not set the temperature lower than
the outside air temperature. Otherwise
the system may not work properly.
. Not recommended if windows fog up.
Dehumidified defrosting or defogging: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1. Push the “ ” front defroster button.
(The indicator light on the button will come on.)
2. Turn the temperature control dial to set
the desired temperature.
. To quickly remove ice from the outside
of the windows, push the fan speed
increase button “
” and set it to the
maximum position.
. As soon as possible after the wind-
shield is clean, push the “ AUTO ” button
to return to the auto mode.
. When the “
” front defroster button
is pushed, the air conditioner will
automatically be turned on at outside
temperatures above 23 8 F ( − 5 8 C) to
defog the windshield, and the air
recirculate mode will automatically be
turned off.
Outside air is drawn into the passenger
compartment to improve the defogging
performance.
Manual operation GUID-229B673E-2AED-4344-9C09-630604A66426
Fan speed control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the fan speed increase “ ” or
decrease “
” buttons to manually con-
trol the fan speed.
Push the “ AUTO ” button to return to
automatic control of the fan speed. Air recirculation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the intake air control button “
” to recirculate interior air inside the
vehicle. The indicator light on the “
”
side will come on.
The air recirculation mode cannot be
activated when the air conditioner is in
the front defrosting mode “
” .
Outside air circulation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the intake air control button “
” to draw outside air into the passen-
ger compartment. The indicator light on the
“
” side will come on.
Automatic intake air control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
In the AUTO mode, the intake air will be
controlled automatically. To manually con-
trol the intake air, push the intake air
control button “
” . To return to the
automatic control mode, push the intake
air control button “
” for about 2
seconds. The indicator lights (both air
recirculation and outside air circulation
sides) will flash twice, and then the intake
air will be controlled automatically.
Monitor, climate, audio, phone and voice recognition systems
4-33

Black plate (212,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-34 Monitor, climate, audio, phone and voice recognition systemsAir flow control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Pushing the “ MODE ” manual air flow
control button selects the air outlet to: : Air flows from center and side ventilators.
: Air flows from center and side ventilators and
foot outlets.
: Air flows mainly from foot outlets.
: Air flows from defroster and foot outlets.
To turn the system off GUID-AD1354E7-58D5-4D12-9984-BCCF1701C8CE
Push the OFF button. SAA1526
Type B
1. “ AUTO ” automatic climate control ON
button/Temperature control dial
2. Air flow control button
3. “ ” Fan speed control dial
4. “ OFF ” button
5. “
” front defroster button
6. “ ” rear window defroster button
(See “ Rear window and outside mirror
defroster switch ” (P.2-34).)
7. “
” intake air control button AUTOMATIC CLIMATE CONTROL
(Type B) GUID-A975719E-9D57-4522-8059-48964137AD90
Automatic operation GUID-EC196CB6-C7FA-4D5B-ACB7-73DE088B666C
Cooling and/or dehumidified heating
(AUTO): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This mode may be used all year round. The
system works automatically to control the
inside temperature, air flow distribution
and fan speed after the preferred tempera-
ture is set manually.
1. Push the “ AUTO ” button on. (The
indicator on the button will illuminate
and AUTO will be displayed.)

Black plate (213,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]2. Use the temperature control dial to set
the desired temperature. .
The temperature can be set within
the following range.
— For U.S.: 60 to 90 8 F (16 to 32 8 C)
— For Canada: 64 to 90 8 F (18 to
32 8 C) .
The temperature of the passenger
compartment will be maintained
automatically. Air flow distribution
and fan speed will also be controlled
automatically.
3. To turn off the climate control system,
push the “ OFF ” button.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction.
Heating (A/C OFF): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The air conditioner does not activate in this
mode. When you need to heat only, use
this mode.
1. Push the “ AUTO ” button on.
2. Push the “ A/C ” button. (The A/C
indicator will turn off.)
3. Turn the temperature control dial to set
the desired temperature. . The temperature of the passenger
compartment will be maintained auto-
matically. Air flow distribution and fan
speed are also controlled automati-
cally.
. Do not set the temperature lower than
the outside air temperature. Otherwise
the system may not work properly.
. Not recommended if windows fog up.
Dehumidified defrosting or defogging: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1. Push the “ ” front defroster button.
(The indicator light on the button will
come on.)
2. Turn the temperature control dial to set
the desired temperature.
. To quickly remove ice from the outside
of the windows, turn the “
” fan
speed control dial and set it to the
maximum position.
. As soon as possible after the wind-
shield is clean, push the “ AUTO ” button
to return to the auto mode.
. When the “
” front defroster button
is pushed, the air conditioner will
automatically be turned on at outside
temperatures above 23 8 F ( − 5 8 C) to
defog the windshield, and the air
recirculate mode will automatically be turned off.
Outside air is drawn into the passenger
compartment to improve the defogging
performance.
Manual operation GUID-1366819E-B7B2-452E-BFAE-A3526FCA00F5
Fan speed control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Turn the “ ” fan speed control dial to
manually control the fan speed.
Push the “ AUTO ” button to return to
automatic control of the fan speed.
Air recirculation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the intake air control button “
” to recirculate interior air inside the
vehicle. The indicator light on the “ ”
side will come on.
The air recirculation mode cannot be
activated when the air conditioner is in
the front defrosting mode “
” .
Outside air circulation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the intake air control button “
” to draw outside air into the passen-
ger compartment. The indicator light on the
“
” side will come on.
Automatic intake air control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
In the AUTO mode, the intake air will be
controlled automatically. To manually con-
Monitor, climate, audio, phone and voice recognition systems
4-35

Black plate (214,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-36 Monitor, climate, audio, phone and voice recognition systemstrol the intake air, push the intake air
control button “
” . To return to the
automatic control mode, push the intake
air control button “
” for about 2
seconds. The indicator lights (both air
recirculation and outside air circulation
sides) will flash twice, and then the intake
air will be controlled automatically.
Air flow control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Pushing an air flow control button manu-
ally controls the air flow and selects the air
outlet to the following settings. : Air flows from center and side ventilators.
: Air flows from center and side ventilators and
foot outlets.
: Air flows mainly from foot outlets.
: Air flows from defroster and foot outlets.
To turn the system off GUID-72F0A526-1E4F-46F2-803C-E31F9547AE00
Push the OFF button. SAA2972
Type C
1. “ AUTO ” automatic operation button/
Temperature control dial (driver side)
2. “ A/C ” air conditioner ON/OFF button
3. “ ” fan speed increase button
4. “
” front defroster button
5. “ MODE ” manual air flow control but-
ton
6. “ DUAL ” zone control ON/OFF button/
Temperature control dial (passenger
side)
7. “ OFF ” button for climate control sys-
tem
8. “
” fan speed decrease button 9. “ ” rear window defroster button
(See “ Rear window and outside mirror
defroster switch ” (P.2-34).)
10. “
” auto-recirculation button/
intake air control button

Black plate (215,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]AUTOMATIC CLIMATE CONTROL
(Type C) GUID-4DC8C348-FAB4-42B1-9378-82EE0A7F7A61
Automatic operation (AUTO) GUID-EB1D0668-6562-4CBB-ABF3-5A4B2EF4A7B9
The AUTO mode may be used year-round
as the system automatically controls con-
stant temperature, air flow distribution and
fan speed after the desired temperature is
set manually.
To turn off the heater and air conditioner,
push the “ OFF ” button.
Cooling and dehumidified heating: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1. Push the “ AUTO ” button.
(The AUTO indicator light will illuminate
and “ AUTO ” will appear on the display.)
2. If the A/C indicator light does not
illuminate, push the “ A/C ” button.
(The A/C indicator light will illuminate.)
3. Turn the temperature control dial (dri-
ver ’ s side) to set the desired tempera-
ture. .
The temperature can be set within
the following range.
— For U.S.: 60 to 90 8 F (16 to 32 8 C)
— For Canada: 64 to 90 8 F (18 to
32 8 C) .
When the DUAL indicator light is
turned off:
— Pushing the driver ’ s side “ AUTO ”
button changes both the driver ’ s
and front passenger ’ s side tem-
perature.
— Pushing the passenger ’ s side
“ DUAL ” button changes only the
front passenger ’ s side tempera-
ture. (The DUAL indicator light
will illuminate and “ DUAL ” will
appear on the display.) .
To set separate desired tempera-
tures for the driver and front pas-
senger, push the “ DUAL ” button, the
indicator light illuminates, and then
turn the corresponding temperature
control dial. .
To cancel the separate temperature
setting, push the “ DUAL ” button, the
indicator light turns off, and the
driver ’ s side temperature setting will
be applied to both the driver ’ s and
front passenger ’ s sides.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction. Heating (A/C off): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1. Push the “ AUTO ” button.
(The AUTO indicator light will illuminate
and “ AUTO ” will appear on the display.)
2. If the A/C indicator light illuminates,
push the “ A/C ” button.
(The A/C indicator light will turn off.)
3. Turn the temperature control dial to set
the desired temperature. .
When the DUAL indicator light is
turned off:
— Pushing the driver ’ s side “ AUTO ”
button changes both the driver ’ s
and front passenger ’ s side tem-
perature.
— Pushing the passenger ’ s side
“ DUAL ” button changes only the
front passenger ’ s side tempera-
ture. (The DUAL indicator light
will illuminate and “ DUAL ” will
appear on the display.) .
To set separate desired tempera-
tures for the driver and front pas-
senger, push the “ DUAL ” button, the
indicator light illuminates, and then
turn the corresponding temperature
control dial.
Monitor, climate, audio, phone and voice recognition systems
4-37

Black plate (216,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-38 Monitor, climate, audio, phone and voice recognition systems .
To cancel the separate temperature
setting, push the “ DUAL ” button, the
indicator light turns off, and the
driver ’ s side temperature setting will
be applied to both the driver ’ s and
front passenger ’ s sides..
Do not set the temperature lower
than the outside air temperature.
Doing so may cause the temperature
not to be controlled properly. .
If the windows fog up, use dehumi-
dified heating instead of the A/C off
heating.
Dehumidified defrosting/defogging: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1. Push the “ ” button. (The indicator
light will illuminate.)
2. Turn the temperature control dial to set
the desired temperature. .
To remove frost from the outside
surface of the windshield quickly,
set the temperature control and fan
speed control to their maximum
position. .
After the windshield is cleared, push
the “ AUTO ” button to set to the
automatic mode. .
When the “ ” button is pushed,
the air conditioner will automatically
turn on when the outside air tem- perature is above 23 8 F ( − 5 8 C) to
defog the windshield. The air recir-
culation mode will automatically
turn off. The outside air circulation
mode will be selected to improve the
defogging performance.
Manual operation GUID-B54CEF74-5525-417B-9446-684CEEF2F4C5
The manual mode can be used to control
the heater and air conditioner to your
desired settings.
To turn off the heater and air conditioner,
push the “ OFF ” button.
Fan speed control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the fan speed control button “ ” to
increase the fan speed.
Push the fan speed control button “
” to
decrease the fan speed.
Push the “ AUTO ” button to change the fan
speed to the automatic mode.
Air flow control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the “ MODE ” button to change the air
flow mode. : Air flows from the center and side ventilators.
: Air flows from the center and side ventilators,
and foot outlets.
: Air flows mainly from the foot outlets. : Air flows from the defroster and foot outlets.
Temperature control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Turn the temperature control dial to set the
desired temperature.
. The temperature can be set within the
following range.
— For U.S.: 60 to 90 8 F (16 to 32 8 C)
— For Canada: 64 to 90 8 F (18 to 32 8 C)
Air recirculation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the intake air control button to
recirculate interior air inside the vehicle.
The indicator light on the “
” side will
illuminate.
The air recirculation mode cannot be
activated when the air conditioner is in
the front defrosting mode “
” .
Outside air circulation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the intake air control button to draw
outside air into the passenger compart-
ment.
The indicator light on the “
” side and
“
” side will turn off.
Automatic intake air control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
In the AUTO mode, the intake air will be
controlled automatically. To manually con-
trol the intake air, push the intake air

Black plate (217,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]control button.
To return to the automatic control mode,
push the intake air control button until the
indicator light on the “
” side illumi-
nates. The advanced climate control sys-
tem turns on and the intake air will be
controlled automatically.
To turn system off GUID-767438D1-A2A8-4078-8AA8-A30753E720F2
Push the OFF button.
Advanced climate control system GUID-AD61F339-E220-4617-BF07-B3EC3255539C
The advanced climate control system keeps
the air inside of the vehicle clean, using
the ion control and the automatic air intake
control with outside odor and exhaust gas
detecting sensor. SAA2734
Ion control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This unit generates highly concentrated
Plasmacluster ®
ions into the air blown
from the ventilators and reduces odor
absorbed into the interior trim.
The high-density Plasmacluster ®
ions gen-
erated in the air conditioner ’ s air stream
not only suppress airborne bacteria and
reduce the adherence of odors to the
interior trim, but also have a proven skin
moisture preserving effect.
When the air conditioner is turned on, the
system generates Plasmacluster ®
ions
automatically. The amount of Plasmacluster ®
ions in-
creases according to the amount of air
flow. When the air flow is high, “
” is
displayed on the screen and when the air
flow is low, the indication in the screen
changes to “
” .
Outside odor and exhaust gas detection
sensor: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
This vehicle is equipped with an outside
odor and exhaust gas detection sensor.
When the automatic intake air control is
ON, the sensor detects odors and exhaust
gas, and then the system automatically
changes from the outside air circulation
mode to the recirculation mode.
When the intake air control button is
pushed under the following conditions,
the indicator light on the “
” side will
illuminate and the outside odor and
exhaust gas detection sensor will turn on.
. The air flow control is not in the front
defroster mode (the indicator light on
the “
” front defroster button is
turned off).
. The outside temperature is about 32 8 F
(0 8 C) or more.
. The outside odor and exhaust gas
detection sensor detects industrial
Monitor, climate, audio, phone and voice recognition systems
4-39

Black plate (218,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-40 Monitor, climate, audio, phone and voice recognition systemsodors such as pulp or chemicals and
exhaust gas such as gasoline or diesel.
When the automatic intake air control is
ON, for the first 5 minutes, the recircula-
tion mode is selected to prevent dust, dirt
and pollen from entering the vehicle and
cleans the air inside of the vehicle with
Plasmacluster ®
ion that are emitted from
the ventilator.
After 5 minutes, the sensor detects outside
odors and exhaust gas and automatically
alternates between the recirculation mode
and outside air circulation mode.
OPERATING TIPS GUID-05B14404-70B8-489F-89C7-C5767F0AC7CE
When the engine coolant temperature and
outside air temperature are low, the air
flow from the foot outlets may not operate
for a maximum of 150 seconds. This is not
a malfunction. After the coolant tempera-
ture warms up, air will flow normally from
the foot outlets. SIC2768
The sunload sensor
* A
on the instrument
panel helps maintain a constant tempera-
ture. Do not put anything on or around this
sensor.
IN-CABIN MICROFILTER GUID-25EB7DE1-36F7-4B0F-9FD5-D23071134FE8
Type A and B:
The climate control system is equipped
with an in-cabin microfilter which collects
dirt, pollen, dust, etc. To make sure the air
conditioner heats, defogs, and ventilates
efficiently, replace the filter in accordance
with the maintenance schedule in the
INFINITI Service and Maintenance Guide.
To replace the filter, contact an INFINITI retailer.
The filter should be replaced if air flow is
extremely decreased or when windows fog
up easily when operating heater or air
conditioning system.
Type C:
The climate control system is equipped
with a natural grape seed polyphenol filter
which collects and neutralizes dirt, pollen,
dust, etc. To make sure that the air
conditioner heats, defogs and ventilates
efficiently, replace the filter in accordance
with the maintenance schedule in the
INFINITI Service and Maintenance Guide.
To replace the filter, contact an INFINITI
retailer.
The filter should be replaced if the air flow
decreases significantly or if windows fog
up easily when operating the heater or air
conditioner.

Black plate (219,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SERVICING CLIMATE CONTROL GUID-3BCE759E-E6AD-4BAD-8B4D-0169FF1A7AAD
The climate control system in your INFINITI
is charged with a refrigerant designed with
the environment in mind. This refrigerant
will not harm the earth ’ s ozone layer.
However, special charging equipment and
lubricant are required when servicing your
INFINITI air conditioner. Using improper
refrigerants or lubricants will cause severe
damage to your climate control system.
(See “ Capacities and recommended fuel/
lubricants ” (P.9-2) for climate control sys-
tem refrigerant and lubricant recommenda-
tions.)
Your INFINITI retailer will be able to service
your environmentally friendly climate con-
trol system.
WARNINGThe system contains refrigerant under high
pressure. To avoid personal injury, any air
conditioner service should be done only by
an experienced technician with the proper
equipment. GUID-470B9283-3868-4B33-8DC7-CC4D3168A0D9
AUDIO OPERATION PRECAUTIONS GUID-1D8ABFD5-94C5-44A1-83BC-2623826E5A2E
Radio GUID-D1856869-259B-4D94-837B-9B9BE2A6D876
Push the ignition switch to the ACC or ON
position and push the radio band select
button to turn on the radio. If you listen to
the radio with the engine not running, the
ignition switch should be pushed to the
ACC position.
Radio reception is affected by station
signal strength, distance from radio trans-
mitter, buildings, bridges, mountains and
other external influences. Intermittent
changes in reception quality normally are
caused by these external influences.
Using a cellular phone in or near the
vehicle may influence radio reception
quality.
Radio reception: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Your INFINITI radio system is equipped with
state-of-the-art electronic circuits to en-
hance radio reception. These circuits are
designed to extend reception range, and to
enhance the quality of that reception.
However there are some general character-
istics of both FM and AM radio signals that
can affect radio reception quality in a
moving vehicle, even when the finest equipment is used. These characteristics
are completely normal in a given reception
area, and do not indicate any malfunction
in your INFINITI radio system.
Reception conditions will constantly
change because of vehicle movement.
Buildings, terrain, signal distance and
interference from other vehicles can work
against ideal reception. Described below
are some of the factors that can affect your
radio reception.
Some cellular phones or other devices may
cause interference or a buzzing noise to
come from the audio system speakers.
Storing the device in a different location
may reduce or eliminate the noise.
Monitor, climate, audio, phone and voice recognition systems
4-41AUDIO SYSTEM