INFINITI QX30 2017 Owner's Manual

Sports Score information
Menu itemAction
[Sports Scores] Select from list Display current event state (scheduled game, during the game, match results)
Select from list XM channels to display informa- tion Select to listen to the radio.
[Select League] [Add League] Add favorite sports genre for the list. When the number of registration is 10, it will be grayed out.
[Delete League] [Multi Select] Delete multiple selected sports scores. [Delete All] Delete all sports scores.
Select from list Delete a selected sports score.
Select from list Display the detail of a score.
Stock Tickers information
Menu item Action
[StockTicker] Display stock names, stock prices, fluctuation contents, variable stock prices, and the receiving date/time.
[Add Stock] Add displaying stock
[Delete Stock] [Delete All] Delete all stocks. [Multi Select] Delete multiple selected stock.
Select from list Delete a selected stock.
4-118Display screen, heater and air conditioner, and audio system

Movie Times information
Menu itemAction
[Movie Listings] [Select City] Select from list Select the city.
[Theater] [Movies] Select from list Display detailed movie information. [Theater Info] Display theater information.
[GO]*Set a destination selected from the list of theaters.
[Near Destina-
tion]* Display the theater near the vehicle’s destination.
[Near Current
Loc.]* Display the theater near the vehicle’s current location.
[Selected City] Change the city.
[Movie] Select from list Display information for the movie theater selected from the list.
[Details] Display movie title, rating and run time.
*: Models with navigation system only.
SXM Info Settings information
Menu item Action
[SXM Info Settings] [Weather Alert] Set weather alert on/off.
Default City Settings information
Menu item Action
[Default City] State list City listSet the current location. This setting is necessary to display weather information and movie information.
[Change Country] Select country.
Display screen, heater and air conditioner, and audio system4-119

SETTINGS MENU
The Infiniti InTouch system can be customised to make it easier for you to use by adjusting various settings.
Push

Setting itemResult
[Navigation]* Display the Navigation setting screen.
Refer to the Navigation Owner’s Manual for details.
[Audio] Display the Audio settings screen.
SeeAudio settings earlier in this section
[Screen] Set the screen display to the preferred settings.
SeeScreen settings earlier in this section
[Volume Adjustment] Set the volume for each item.
SeeVolume settings earlier in this section
[Clock] Set the Clock to your preferred settings.
SeeClock settings earlier in this section
[InTouch Services] Set INFINITI InTouch
TMServices.
Refer to the Navigation Owner’s Manual for details.
[Voice recognition] Set Minimize Voice Feedback to on/off and the audio setting for voice recognition use.
[Camera/Sonar] Set the camera and parking sensor (sonar) to the preferred settings. SeeAround View Monitor setting earlier in this section
[Other] [Language] Set the language to the preferred settings.
SeeLanguage settings earlier in this section
[Keyboard Type] Set the Keyboard Type to [QWERTY] or [ABC].
[Low on Fuel Alert] Set the fuel low notification to on/off.
[Software information] Display the software information.
* : Models with navigation system.
NOTE
•The displayed items vary depending on the vehicle model and equipped options.
•The order of displayed items can be sorted.
Display screen, heater and air conditioner, and audio system4-121

CUSTOMER ASSISTANCE
For assistance or inquiries about Infiniti InTouch, or to order updated map data for the navigation system (if equipped), it is recommended you contact
an INFINITI retailer.
TROUBLESHOOTING GUIDE
4-122Display screen, heater and air conditioner, and audio system

SYSTEM UNIT
Liquid crystal display
SymptomPossible causePossible solution
The screen is too dark. The cabin temperature is too low. Wait until the cabin temperature becomes moderate.
Screen brightness is set to the maximum darkness. Adjust the brightness setting of the screen. Screen settingsearlier in this section
The screen is too bright. Screen brightness is set to the maximum brightness. Adjust the brightness setting of the screen.
Screen settingsearlier in this section
A small black spot or a small bright spot appears on the screen. This is a phenomenon typical to liquid crystal
displays. This is not a malfunction.
A dot or stripe pattern appears on the screen. Electromagnetic waves that are generated from neon billboards, high voltage electric power cables, hamradios or other radio devices equipped to other vehicles may adversely affect the screen. This is not a malfunction.
Image lag appears on the screen. Phenomenon typical of liquid crystal displays. This is not a malfunction.
Image motion displayed on the screen is slow. The cabin temperature is below 32
oF(0oC). Wait until the in-cabin temperature rises to above 32oF(0oC).
When looking at the screen from an angle, the screen lightens or darkens. This is a phenomenon typical to liquid crystal
displays. Adjust the brightness setting of the screen.
Screen settings earlier in this section
The screen turns blue or an error message is displayed on the display. The SD card is not inserted into the slot correctly. If the SD card containing map data is accidentally
removed, after re-inserting the SD card containing
map data into the slot, place the ignition switch in the OFF position and then back in the ON position again.
A system malfunction has occurred. It is recommended you contact an INFINITI retailer
for inspection.
Display screen, heater and air conditioner, and audio system4-123

AUDIO SYSTEM
HD Radio Technology
Sound:
SymptomPossible cause Possible solution
Delay in digital audio on HD Radio broadcasts. The radio acquires an analog station first and blends to a digital signal.This is not a malfunction.
Audio skip, stutter or echo. The radio station has not properly aligned the digital
and analog audio. Verify correct operation on another station. Report
any station with poor performance.
Volume changing up/down. The radio station has not properly aligned digital and
analog audio level. Verify correct operation on another station and check
www.hdradio.com for stations in the area. Report any station with poor performance.
Sound fading in and out. The transition between analog and digital is taking
place (blending). Verify transition performance on several stations in
the area. Report any station with poor performance.
Excessive blending (Transition between analog and digital). The receiver is located near the edge of the digital
coverage area. Refer to www.hdradio.com to verify stations in your
coverage area.
Digital audio not better than analog audio. Audio processing on the digital audio at a station can potentially decrease the digital audio sound quality. Verify correct operation on another station. Report
any station with poor performance.
4-124Display screen, heater and air conditioner, and audio system

Functional:
SymptomPossible cause Possible solution
Keep losing my local stations. The digital coverage is slightly less than the analog
signal coverage. Verify correct operation on another station. This is
expected behavior.
Shadowing (urban/terrain) can cause reduced digital coverage. Verify correct operation on another station.
Some data fields are blank. Text information is sent at the broadcaster’s discre-
tion. Verify correct operation on another station. Report
station issues.
Text information is truncated / appears to be more available. The display is limited to a fixed number of characters
and more data is being sent than can be shown. This is intended behavior. Refer to the Owner’s
Manual for ability to access addition.
AM reception changes at night. AM stations are required by the government (FCC) to
lower their power at night. This is not a malfunction.
Display screen, heater and air conditioner, and audio system4-125

Compact Disc (CD) player
SymptomPossible cause Possible solution
Music cannot be played back. The disc is inserted upside down.Insert a CD with the label side facing up.
Moisture has accumulated inside the unit. Wait until the moisture evaporates. (approximately 1 hour)
The cabin temperature is too high. Wait until the cabin temperature becomes moderate.
The disc is scratched or dirty. Wipe off any dirt from the disc.
Scratched discs cannot be recovered. Replace the disc.
Depending on the condition in which they are stored, discs may become unreadable due to deterioration(for example, keeping the discs in the passenger compartment, etc.). Replace the disc with a deterioration-free disc. Do not
use a deteriorated disc. The label surface of the discmay crack or chip, and the layer of the label surface may eventually peel off.
Compressed audio files cannot be played back. If both music CD files (CD-DA data) and compressed audio files (MP3 data, etc.) are mixed on one disc, thecompressed audio files cannot be played back. Prepare a disc that contains compressed audio files
only.
The files are not named using characters that are compliant with the specifications. Use the character codes and the number of
characters that are compliant with the specifications for folder names and file names. In addition, always use “.MP3”, “.WMA”, “.mp3” or “.wma” file extensions.
It takes a long time before the music starts playing. The disc contains a large amount of data. Some time may be required to check the files. It is recommended that unnecessary folders or any filesother than compressed audio files should not be recorded on a disc.
The sound quality is poor. The disc is dirty.Wipe off any dirt from the disc.
4-126Display screen, heater and air conditioner, and audio system

SymptomPossible cause Possible solution
No sounds are played although the CD play time is displayed. The system is playing the first track of a mix mode
disc. (Mix mode is a format in which data except
music is recorded on the first track and music data is recorded on one other than the first track in a session.) Play music data in other tracks.
Music cuts off or skips. The combination of writing software and hardware
might not match; or the writing speed, writing depth,
writing width, etc. might not match the specifications. Create a disc using different writing speed settings,
etc.
The system skips the selected track and moves to the next track. A non-MP3/WMA file has been given an extension of
“.MP3”, “.WMA”, “.mp3” or “.wma”. Prepare MP3/WMA files.
Some of the file cannot be played due to copyright protection. Prepare playable files.
The tracks do not play back in the desired order. The folder locations on the disc are changed by the writing software while the files are written on thedisc. Check the settings of the writing software and create
a new disc.
Display screen, heater and air conditioner, and audio system4-127