HAC-114 INFINITI QX56 2011 Factory Service Manual
[x] Cancel search | Manufacturer: INFINITI, Model Year: 2011, Model line: QX56, Model: INFINITI QX56 2011Pages: 5598, PDF Size: 94.53 MB
Page 3220 of 5598
![INFINITI QX56 2011 Factory Service Manual
HAC-114
< DTC/CIRCUIT DIAGNOSIS >[AUTOMATIC AIR CONDITIONING]
POWER SUPPLY AND GROUND CIRCUIT
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair harness or connector.
3.CHECK INSTALLATION INFINITI QX56 2011 Factory Service Manual
HAC-114
< DTC/CIRCUIT DIAGNOSIS >[AUTOMATIC AIR CONDITIONING]
POWER SUPPLY AND GROUND CIRCUIT
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair harness or connector.
3.CHECK INSTALLATION](/img/42/57033/w960_57033-3219.png)
HAC-114
< DTC/CIRCUIT DIAGNOSIS >[AUTOMATIC AIR CONDITIONING]
POWER SUPPLY AND GROUND CIRCUIT
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair harness or connector.
3.CHECK INSTALLATION OF INTAKE MO
DE DOOR MOTOR CONTROL LINKAGE
Check intake mode door motor control linkage is properly installed. Refer to HAC-152, "
Exploded View".
Is the inspection result normal?
YES >> Replace intake mode door motor. Refer to HAC-153, "INTAKE DOOR MOTOR : Removal and
Installation".
NO >> Repair or replace malfunctioning part.
4.CHECK INTAKE MODE DOOR MOTOR POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect intake mode door motor connector and A/C auto amp. connector.
3. Check continuity between intake mode door mo tor harness connector and A/C auto amp. harness con-
nector.
Is the inspection result normal?
YES >> Replace A/C auto amp.. Refer to HAC-146, "Removal and Installation".
NO >> Repair harness or connector.
REAR AIR MIX DOOR MOTOR
REAR AIR MIX DOOR MOTO R : Diagnosis ProcedureINFOID:0000000006275953
1.CHECK REAR AIR MIX DOOR MOTOR POWER SUPPLY
1. Turn ignition switch ON.
2. Check voltage between rear air mix door motor harness connector and ground.
Is the inspection result normal?
YES >> GO TO 2.
NO >> GO TO 4.
2.CHECK REAR AIR MIX DOOR MOTOR GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect rear air mix door motor connector.
3. Check continuity between rear air mix door motor harness connector and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair harness or connector.
3.CHECK INSTALLATION OF REAR AIR MIX DOOR MOTOR
Check rear air mix door motor is properly installed. Refer to HAC-152, "
Exploded View".
Intake mode door motor A/C auto amp.
Continuity
Connector Terminal Connector Terminal
M254 1 M50 17 Existed
+ −Voltage
(Approx.)
Rear air mix door motor
Connector Terminal B210 1 Ground 12 V
Rear air mix door motor —Continuity
Connector Terminal
B210 2 Ground Existed
Revision: 2010 May2011 QX56
Page 3241 of 5598
![INFINITI QX56 2011 Factory Service Manual
REAR AUTOMATIC AIR CONDITIONING SYSTEMHAC-135
< SYMPTOM DIAGNOSIS > [AUTOMATIC AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
REAR AUTOMATIC AIR CONDITIONING SYSTEM
Diagnosis Chart By SymptomINF INFINITI QX56 2011 Factory Service Manual
REAR AUTOMATIC AIR CONDITIONING SYSTEMHAC-135
< SYMPTOM DIAGNOSIS > [AUTOMATIC AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
REAR AUTOMATIC AIR CONDITIONING SYSTEM
Diagnosis Chart By SymptomINF](/img/42/57033/w960_57033-3240.png)
REAR AUTOMATIC AIR CONDITIONING SYSTEMHAC-135
< SYMPTOM DIAGNOSIS > [AUTOMATIC AIR CONDITIONING]
C
D
E
F
G H
J
K L
M A
B
HAC
N
O P
REAR AUTOMATIC AIR CONDITIONING SYSTEM
Diagnosis Chart By SymptomINFOID:0000000006275981
NOTE:
Perform the self-diagnoses with CONSULT-III before performing the symptom diagnosis. If DTC is detected,
perform the corresponding diagnosis.
The following table is based on the condition that fr ont automatic air conditioning system operates normally.
Symptom Corresponding malfunction part Reference
Rear air conditioning system cannot be controlled. (Front A/C control)
Operation status of rear air conditioning system is not indicated on front display. Multi AV system
AV- 1 9 9 , "
Symptom Table"
Rear air conditioning sys-
tem cannot be controlled.
(Rear A/C control)Operation status of
rear air conditioning
system is not indicated
on rear A/C control
display
Power supply system of rear A/C
control
Rear A/C control HAC-115, "
REAR A/C CONTROL :
Diagnosis Procedure"
Operation status of
rear air conditioning
system is indicated on
rear A/C control dis-
play Communication circuit between rear
A/C control and A/C auto amp.
A/C auto amp. HAC-127, "
Diagnosis Procedure"
Air outlet does not change.
Rear mode door motor does not operate normally. Circuit between rear mode door mo-
tor and A/C auto amp.
Rear mode door motor control link- age
Front mode door motor
A/C auto amp. HAC-116, "REAR MODE DOOR
MOTOR : Diagnosis Procedure"
Discharge air temperature does not change.
Rear air mix door motor does not operate normally. Circuit between rear air mix door
motor and A/C auto amp.
Rear air mix door motor installation condition
Rear air mix door motor
A/C auto amp. HAC-114, "REAR AIR MIX DOOR
MOTOR : Diagnosis Procedure"
Rear blower motor operation is malfunctioning.
Power supply system of rear blower
motor
Circuit between rear blower motor
and A/C auto amp..
Rear blower motor
A/C auto amp. HAC-131, "Diagnosis Procedure"
Insufficient cooling.
No cool air comes out. (Air flow volume is normal.) Power supply system of rear A/C re-
lay
Circuit between rear A/C relay and A/C auto amp..
Circuit between rear A/C relay and rear A/C solenoid valve.
Circuit between rear A/C solenoid
valve and ground.
Rear A/C relay
Rear A/C solenoid valve
A/C auto amp.
Refrigerant cycle
Air leakage from each duct
Temperature setti ng trimmer (rear) HAC-139, "REAR AIR CONDI-
TIONER : Diagnosis Procedure"
Revision: 2010 May2011 QX56