air bleeding ISUZU TROOPER 1995 User Guide

7C-16 CLUTCH
(2) Remove the rubber cap from the bleeder
screw and wipe clean the bleeder screw.
Connect a vinyl tube to the bleeder screw
and insertthe other end
of the vinyl tube into
a transparent container.
(3) Pump the clutch pedal repeatedly and hold it
depressed (Fig. 7C-40).
Fig. 7C-40
(4) Loosen the bleeder screw to release clutch
fluid with air bubbles into the container, then
tighten the bleeder screw immediately.
(5) Release the clutch pedal carefully. Repeat
the above operation until air bubbles
disappear from the clutch fluid being
pumped out into the container. During the
bleeding operation, keep the
clutch fluid
reservoir filled to the specified level.
Reinstall the rubber cap.
Bleeding
the slave cylinder (Fig. 7C·41)
(6) Repeat steps (2) through (5) for bleeding the
slave cylinder.
Vinyl tube
Fig. 7C-41
•