Timing chain JAGUAR XFR 2010 1.G User Guide

[x] Cancel search | Manufacturer: JAGUAR, Model Year: 2010, Model line: XFR, Model: JAGUAR XFR 2010 1.G
Pages: 3039, PDF Size: 58.49 MB

JAGUAR XFR 2010 1.G User Guide XFR 2010 1.G JAGUAR JAGUAR https://www.carmanualsonline.info/img/21/7642/w960_7642-0.png JAGUAR XFR 2010 1.G User Guide

Search: (fuel fill door release, child restraint, trip computer, fuel pressure, fog light bulb, adding oil)

Load previous 10 pages

Page 1036 of 3039

JAGUAR XFR 2010 1.G User Guide
10.

11. CAUTION: If the variable valve timing (VVT) units are
knocked or dropped then the VVT must be replaced.
Remove the timi

10.

11. CAUTION: If the variable valve timing (VVT) units are
knocked or dropped then the VVT must be replaced.
Remove the timing chain with the VVT units. www.JagDocs.com

Page 1038 of 3039

14.

15. CAUTION: If the VVT is knocked or dropped then the
VVT must be replaced.
Remove the timing chain with the VVT units.

Page 1042 of 3039

JAGUAR XFR 2010 1.G User Guide 7. CAUTIONS:

Do not allow the camshaft to rotate.

If the VVT is knocked or dropped then the VVT must
be replaced.

NOTE: Do not tighten at this stage.

Install the timing chain with t

7. CAUTIONS:

Do not allow the camshaft to rotate.

If the VVT is knocked or dropped then the VVT must
be replaced.

NOTE: Do not tighten at this stage.

Install the timing chain with the variable valve
timing (VVT) units.

8.
Make sure that all the timing chain alignment marks are in the
positions shown.

Page 1044 of 3039

JAGUAR XFR 2010 1.G User Guide
10.

11. Make sure the tensioner piston is fully extended. Then fully
depress and lock the tensioner piston with the grenade

10.

11. Make sure the tensioner piston is fully extended. Then fully
depress and lock the tensioner piston with the grenade pin
before installation, failure to do this may result in damage
to the engine.

CAUTION: Do not release the timing chain tensioner
locking pin at this stage.
Torque: 10 Nm

Page 1045 of 3039

JAGUAR XFR 2010 1.G User Guide 12. CAUTIONS:

Do not allow the camshafts to rotate.

If the VVT is knocked or dropped then the VVT must
be replaced.

NOTE: Do not tighten at this stage.

Install the timing chain with

12. CAUTIONS:

Do not allow the camshafts to rotate.

If the VVT is knocked or dropped then the VVT must
be replaced.

NOTE: Do not tighten at this stage.

Install the timing chain with the VVT units.

13.

Make sure that all the timing chain alignment marks are in the
positions shown.

Page 1047 of 3039

JAGUAR XFR 2010 1.G User Guide
15.

16. Make sure the tensioner piston is fully extended. Then fully
depress and lock the tensioner piston with the grenade

15.

16. Make sure the tensioner piston is fully extended. Then fully
depress and lock the tensioner piston with the grenade pin
before installation, failure to do this may result in damage
to the engine.

CAUTION: Do not release the timing chain tensioner
locking pin at this stage.
Torque: 10 Nm

Page 1056 of 3039

JAGUAR XFR 2010 1.G User Guide
39.

40.
41. CAUTION: If the special tool cannot be installed, the
timing chain installation steps must be repeated.
Install the special tool.

39.

40.
41. CAUTION: If the special tool cannot be installed, the
timing chain installation steps must be repeated.
Install the special tool.

Remove the special tool.

Remove the special tool. www.JagDocs.com

Page: < prev 1-10 11-20

Search: (checking oil, compression ratio, display, technical specifications, refuelling, torque)