JEEP RENEGADE 2017 1.G Owners Manual

Get Started
All you need to control your Uconnect system with your
voice are the buttons on your steering wheel.
1. VisitUconnectPhone.com to check mobile device and
feature compatibility and to find phone pairing in-
structions.
2.
Reduce background noise. Wind and passenger conversa-
tions are examples of noise that may impact recognition.
3. Speak clearly at a normal pace and volume while facing straight ahead. The microphone is positioned on the
rearview mirror and aimed at the driver. 4. Each time you give a Voice Command, you must first
push either the VR or Phone button, wait until afterthe
beep, then say your Voice Command.
5. You can interrupt the help message or system prompts by pushing the VR or Phone button and saying a Voice
Command from current category.
Uconnect 6.5 NAV
Uconnect Voice Command Buttons
1 — Push To Initiate Or To Answer A Phone Call, Send Or Receive
A Text
2 — Push To Begin Radio, Navigation, Or Media Functions
3 — Push To End Call
10
MULTIMEDIA 479

Basic Voice Commands
The basic Voice Commands below can be given at any
point while using your Uconnect system.
Push the VR button
. After the beep, say
•Cancel to stop a current voice session.
• Help to hear a list of suggested Voice Commands.
• Repeat to listen to the system prompts again.
Notice the visual cues that inform you of your voice
recognition system’s status. Cues appear on the touch-
screen.
Radio
Use your voice to quickly get to the AM, FM or SiriusXM
Satellite Radio stations you would like to hear. (Subscrip-
tion or included SiriusXM Satellite Radio trial required.)
Push the VR button
. After the beep, say
• Tune to ninety-five-point-five FM.
• Tune to Satellite Channel Hits 1.
Uconnect 5.0
Uconnect 6.5 NAV
480 MULTIMEDIA

TIP:At any time, if you are not sure of what to say or want
to learn a Voice Command, press the VR button
and say
“Help.” The system will provide you with a list of
commands.
Media
Uconnect offers connections via USB Port, Bluetooth and
Auxiliary Ports (If Equipped). Voice operation is only
available for connected USB and iPod devices. (Remote CD
player optional and not available on all vehicles.)
Push the VR button
. After the beep, say one of the
following commands and follow the prompts to switch
your media source or choose an artist.
• Change source to Bluetooth.
• Change source to iPod.
Uconnect 5.0 Radio
Uconnect 6.5 NAV Radio
10
MULTIMEDIA 481

•Change source to USB.
• Play artist Beethoven; Play album Greatest Hits; Play
song Moonlight Sonata; Play genreClassical.
TIP: For the Uconnect 5.0 and 6.5 NAV systems, press the
Browse button on the touchscreen to see all of the music on
your iPod or USB device. Your Voice Command must
match exactly how the artist, album, song and genre
information is displayed.
Phone
Making and answering hands-free phone calls is easy with
Uconnect. When the Phonebook button is illuminated on
your touchscreen, your system is ready. Check
UconnectPhone.com for mobile phone compatibility and
pairing instructions.
Push the Phone button
. After the beep, say one of the
following commands
• Call John Smith.
• Dial 123-456-7890 and follow the system prompts.Uconnect 5.0 Media
Uconnect 6.5 NAV Media
482 MULTIMEDIA

•Redial (call previous outgoing phone number).
• Call back (call previous incoming phone number).
TIP: When providing a Voice Command, push the Phone
button
and say “Call,”then pronounce the name
exactly as it appears in your phone book. When a
contact has multiple phone numbers, you can say “Call
John Smith work.”
Voice Text Reply
Uconnect will announceincomingtext messages. Push the
Phone button
and say “Listen.” (Must have compat-
ible mobile phone paired to Uconnect system.)
1. Once an incoming text message is read to you, push the Phone button
. After the beep, say: “Reply.”
2. Listen to the Uconnect prompts. After the beep, repeat
one of the pre-defined messages and follow the system
prompts.Uconnect 5.0 Phone
Uconnect 6.5 NAV Phone
10
MULTIMEDIA 483

PRE-DEFINED VOICE TEXT REPLY RESPONSESYes. Stuck in traffic. See you later.
No. Start without
me. I’ll be late.
Okay. Where are you? I will be <5, 10,
15, 20, 25, 30, 45, 60>* minutes late.
Call me.
Are you there
yet?
I’ll call you later. I need
directions. See you in <5,
10, 15, 20, 25, 30, 45, 60>* ofminutes.
I’m on my way.
Can’t talk right
now.
I’m lost. Thanks.
*Use only the numbers listed or the system may not
transpose the message.
TIP: Your mobile phone must have the full implementation
of the Message Access Profile (MAP) to take advantage of
this feature. For details about MAP, visit
UconnectPhone.com. Apple iPhone iOS6 or later supports
reading incoming text messages only.Navigation (6.5 NAV)
The Uconnect navigation feature helps you save time and
become more productive when you know exactly how to
get to where you want to go.
1. To enter a destination, push the VR button
. After the
beep, say:
• For the 6.5 NAV Uconnect System, say: “Navigate to
800 Chrysler Drive Auburn Hills, Michigan.”
2. Then follow the system prompts.
TIP: To start a POI search, push the VR button
. After
the beep, say: “ Find nearestcoffee shop.”
484 MULTIMEDIA

Uconnect Access* (6.5/6.5 NAV)
WARNING!
Some Uconnect Access services, including 9-1-1 and
assist will NOT work without an operable 1X (voice/
data) or 3G (data) network connection.
NOTE: Your vehicle may be transmitting data as autho-
rized by the subscriber.
An included trial and/or subscription is required to take
advantage of the Uconnect Access services in the next section of this guide. To register with Uconnect Access,
push the MORE button below the 6.5-inch touchscreen to
get started. Detailed registration instructions can be found
on the next page.
*Uconnect Access is available only on equipped vehicles
purchased within the continental United States, Alaska and
Hawaii. Services can only be used where coverage is
available; see coverage map for details.
9-1-1 Call
Security Alarm Notification
Remote Door Lock/Unlock
Stolen Vehicle Assistance
Remote Vehicle Start**
Remote Horn and Lights
Yelp Search
Voice Texting
Roadside Assistance Call
3G Wi-Fi Hotspot***
**If vehicle is equipped.
***Extra charges apply.
Uconnect 6.5 NAV Navigation
10
MULTIMEDIA 485

Registration (6.5/6.5 NAV)
1. Push the ASSIST button located in the overhead console.
2. Press the “Uconnect Care” button on the touchscreen.
3. A helpful Uconnect Care Agent will register your ve-hicle and handle all of the details.
Signing up is easy! Simply follow the steps above. Or,
press the “Apps
” button on the touchscreen to
“Register By Web” to complete the process using your
wireless device or computer.
For further information please visit DriveUconnect.com.
Mobile App (6.5 NAV)
You’re only a few steps away from your Uconnect Acces
mobile app.
Mobile App
486 MULTIMEDIA

To use the Uconnect Access Mobile App:
1. Download the Uconnect Access App from the App Storeor Google Play.
2. Open the app and tap Create Account.
3. Enter your email address and click Next.
4. Once your email address is verified, enter a password and full name to create an account.
NOTE: Once you download the App to your compatible
mobile device, you will also be able to start your vehicle
and lock/unlock its doors from virtually anywhere. For
further information please visit DriveUconnect.com.
Voice Texting (6.5 NAV)
1. To send a message, push the Phone button. After the
beep, say the following command: “Send messageto
John Smith.”
2. Listen to the prompt. After the beep, dictate the message you would like to send. Wait for Uconnect to process
your message.
3. The Uconnect system will repeat your message and provide a variety of options to add to, delete, send or
hear the message again. After the beep, tell Uconnect what you’d like to do. For instance, if you’re happy with
your message, after the beep, say:
“Send.”
You must be registered with Uconnect Access and have a
compatible MAP – enabled smartphone to use your voice
to send a personalized text message.
TIP:
• Not compatible with iPhone.
• Messages are limited to 140 characters.
• The Messaging button on the touchscreen must be
illuminated to use the feature.
Yelp (6.5 NAV)
Once registered with Uconnect Access, you can use your
voice to search for the most popular places or things
around you.
1. Push the MORE button on the faceplate.
2. Press the “Apps” button then the “All Apps” button on the touchscreen.
3. Press the “Yelp” button on the touchscreen.
4. Once the YELP home screen appears, push the VR button
, then say: “YELP search.” 10
MULTIMEDIA 487

5. Listen to the system prompts and after the beep, tellUconnect the place or business that you’d like Uconnect
to find.
TIP: Once you perform a search, you can reorganize the
results by selecting either the Best Match, Rating or Dis-
tance tab on the top of the touchscreen display.
SiriusXM Travel Link (6.5 NAV)
Need to find a gas station, view local movie listings, check
a sports score or the 5 - day weather forecast? SiriusXM Travel Link is a suite of services that brings a wealth of
information right to your Uconnect 6.5 NAV system.
Push the VR button
. After the beep, say one of the
following commands:
• Show fuel prices.
• Show 5 - day weather forecast.
• Show extended weather.
TIP: Traffic alerts are not accessible with Voice Command.
Yelp
SiriusXM Travel Link
488 MULTIMEDIA