LKAS function changeThe driver can change LKAS to Lane
Departure Warning System (LDWS) or change the LKAS mode between Stand‐
ard LKA and Active LKA from the User
Settings Mode on the LCD display. The system is automatically set to Stand‐
ard LKA.
Lane Departure Warning system
(LDWS)
• The system can be converted to LKA to LDW at the User setting mode.
• Refer to L
When the system is not used turn the
system off by pressing the switch.
When the system is turned on the warning light will illuminate for 3 sec‐
onds on the outside rearview mirror.
Warning type
The system will activate when: 1. The system is on
2. Vehicle speed is above 30 km/h (18.6 mph)
3. Other vehicles are detected in the rear side
T U T U B H F
0 6 .
If a vehicle is detected within the boun‐
dary of the system, a warning light will illuminate on the outside rearview mir‐
ror. If the detected vehicle is not in detec‐
tion range, the warning will be turned off.
O E T U B H F
0 6 .
The second stage alarm will activate
when: 1. The first stage alert is on
2. The turn signal is on to change a lane
When the second stage alert is activa‐ ted, a warning light will be blinking on
the outside rearview mirror and an
alarm will sound.
If you move the turn signal switch to origin position, the second stage alert
will be deactivated. The second stage alarm can be deacti‐
vated. • To activate the alarm: Go to the User Settings Mode
Sound and select "BSD" on the LCD
display.
• To deactivate the alarm: Go to the User Settings Mode
Sound and deselect "BSD" on the LCD
display.
CAUTION
The alarm function helps alert thedriver. Deactivate this function onlywhen it is necessary
Driving your vehicle
7-92