KIA SEDONA 2021 Features and Functions Guide

9ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
(Button panel
located left of
Steering Wheel)
(Outlet located on back of Center
Console and the Luggage Zone*)
AC Inverter *
The AC Inverter supplies 115V/100W electrical power to operate
accessories or equipment Press the AC Inverter button C to activate
Instrument Cluster Control
With parking lights/headlights ON, press button B (+) or (-) to adjust the
brightness of the instrument panel illumination

REMINDER: The Instrument Cluster Control does not adjust brightness on the audio head unit
screens Use the display settings in the Setup menu to adjust the brightness on the screen
Electronic Stability Control (ESC)†8
The ESC system is designed to help stabilize the vehicle during certain
cornering maneuvers It is a good idea to keep the ESC turned on for daily
driving whenever possible
Press the ESC OFF button
A to turn Traction Control OFF/ON Press again
to turn ON
To turn OFF both the Traction Control and Stability Control, press and hold
for more than 3 seconds Press again to turn ON
REMINDERS:

•ESC is turned ON by default at vehicle startup If vehicle power is cycled, ESC will turn ON again

•
The ESC Indicator Light in the instrument cluster will illuminate whenever the ESC is
in operation
Refer to section 5 in the Owner’s Manual for more information.
Hill-Start Assist Control (HAC)†8
HAC helps prevent the vehicle from rolling backwards when accelerating
from a stop while on a steep incline HAC automatically activates
whether the ESC is OFF or ON but does NOT activate when the ESC has
malfunctioned


•HAC provides a 2-second delay before the vehicle may start rolling
backwards

•When HAC is active (e g , during initial acceleration from a stop on an incline),
you may notice that the brakes will momentarily remain engaged after you
depress the accelerator – this is normal HAC operation
QUICK TIPS
ABC
REMINDERS:

•HAC does not operate when the gear shift is in the P (Park) or the N (Neutral) position

•HAC does not replace the need to apply brakes while the vehicle is stopped on an incline
Refer to section 5 in the Owner’s Manual for more information. Refer to section 4 in the Owner’s Manual for more information.
Refer to section 4 in the Owner’s Manual for more information.
DRIVER'S PANEL

SEDONA FEATURES & FUNCTIONS GUIDE10


Blind-Spot Collision
Warning w/ RCCW Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
(Button panel located left of Steering Wheel)
Blind-Spot Collision Warning (BCW) *†6
The BCW system uses radar sensors to help alert the driver in certain situations if it
detects an approaching vehicle in the driver’s blind spot area before changing lanes
To enable BCW system, go to the User Settings > Driver Assistance > Blind-Spot
Collision Warning To turn BCW on, press the BCW button
A
The system will become active when the vehicle is traveling faster than 20 mph and
will alert the driver if another vehicle is detected by the radar sensor
Blind-Spot Collision Warning (BCW)
1st-stage alert: When another vehicle is detected within the BCW system boundary
B, or a
vehicle approaches at a high speed, a yellow indicator will illuminate on the outside rearview
mirrors
C
2nd-stage alert: When the 1st-stage alert is on and the driver activates a turn signal, a flashing
yellow indicator will illuminate on the outside rearview mirrors and the system will sound an alert
REMINDERS:
•The BCW system will not show a warning if the vehicle speed is only 6 mph above the surrounding vehicles

•If the BCW is turned ON and the ignition is cycled, the BCW system returns to ON
Refer to section 5 in the Owner’s Manual for more information.
Rear Cross-Traffic Collision Warning (RCCW) *†6
If the RCCW system sensors detect approaching vehicles from the rear left or rear right side
of the vehicle D, the system will sound an audible alert, the yellow-flashing indicators on the
outside rearview mirror will illuminate and a message will appear on the LCD screen when
these conditions are met:

• The gear shift is moved into Reverse

• The vehicle is moving slower than 6 mph
To turn the RCCW system on, go to User Settings > Driver Assistance > Rear Cross-Traffic Collision Warning
REMINDERS:

•When vehicle power is cycled, RCCW will remain in the previous state

•When a vehicle is approaching within the sensing range and traveling between 2 5 and 22 mph, the RCCW system will show a warning
Refer to section 5 in the Owner’s Manual for more information. The BCW and RCCW systems are
supplemental systems. Do not
solely rely on these systems and
always pay attention to drive safely.
Images are for illustrative purposes
only and may not reflect actual
feature or operation.
*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
A
B
C
D
DRIVER'S PANEL

ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER11


Lane Departure
Warning Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
When the LDW sensor does not detect the
lane traveling in, the lane is not illuminated When the LDW sensor detects the

lane traveling in, the lane is illuminated
Lane Departure Warning
Lane Departure Warning Lane Departure Warning
Lane Departure Warning
Lane Departure Warning
Lane Departure Warning
Lane Departure Warning
Lane Departure Warning
When the LDW sensor detects the vehicle veering outside of the lane traveling in,
the lane the vehicle is crossing will blink (shown in both images at left)
Lane Departure Warning
Lane Departure WarningLane Departure Warning
Lane Departure Warning
Lane Departure Warning
Lane Departure Warning Lane Departure Warning
Lane Departure Warning
(Button panel
located left of
Steering Wheel)
Lane Departure Warning (LDW) *†6
Lane Departure Warning system is designed to detect the lane markers
using a front view camera on the windshield and can warn the driver
when the vehicle starts departing from the lane
With the Engine Start /Stop button in the ON position, press the LDW
button
A to turn the system ON The instrument cluster indicator
will initially illuminate white It will remain white when the vehicle is
traveling slower than 40 mph and the system does not detect the lane
markers When the LDW system detects the lane markers, the LDW
icon will illuminate green
If LDW detects that you are moving outside of your lane, the system
may issue a warning on the LCD screen and an alert may sound
The system will operate under the following conditions:
• The vehicle speed exceeds approximately 40 mph

• The LDW system recognizes the lane the vehicle is traveling in

• The vehicle is between the lane markers
REMINDERS:
• LDW will not issue a warning if the turn signal or hazard signal is activated
• If the LDW system is set on or off and the ignition is cycled, the system returns
to its previous state
Refer to section 5 in the Owner’s Manual for more information. Lane Departure Warning (LDW) is
not a substitute for safe and proper
driving. Always drive safely and use
caution. LDW may not always alert
the driver if the vehicle is driven
outside of its lane.
Images are for illustrative purposes
only and may not reflect actual
feature or operation.
A
DRIVER'S PANEL

SEDONA FEATURES & FUNCTIONS GUIDE12*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
Forward Collision-Avoidance Assist (FCA) *†6
FCA is designed to help alert the driver and, under certain conditions, temporarily apply emergency braking when
rapidly approaching a vehicle that is slowing down, braking or stopped Initially, FCA provides Forward Collision
Warning (FCW ) when it detects a potential collision with a vehicle or pedestrian in front, emitting an audible
warning and visual alert on the instrument cluster
If the system detects that the collision risk has increased, FCA automatically applies the brakes to reduce your
speed, potentially helping to reduce the effects of a possible collision
To turn the FCA system on, go to User Settings > Driver Assistance > Forward Collision-Avoidance Assist The alert
settings (Early, Normal, Late) can also be adjusted in the User Settings
FCA / FCW will become active when the:
• Engine Start /Stop button is ON
• Vehicle is traveling faster than approximately 6 mph
• Electronic Stability Control (ESC) is ON
Manual Folding Mirrors *
To fold the mirrors in manually, pull the mirror
towards the window
REMINDERS:
• FCA / FCW will be activated by default when vehicle power is cycled on, even when previously set to off
• FCA / FCW will not operate when the vehicle is traveling faster than approximately 50 mph
• If FCA is operating and the ESC (Electronic Stability Control) is tu rned off, the FCA system is automatically turned off
• When FCA is off, the FCA warning indicator is on in the Instrument Cluster
Refer to section 5 in the Owner’s Manual for more information. Forward Collision-Avoidance Assist
(FCA)* / Forward Collision Warning
(FCW)* are not substitutes for safe
and proper driving. Always drive
safely and use caution. FCA / FCW
may not always alert the driver
when the vehicle is approaching
another vehicle.
Images are for illustrative purposes
only and may not reflect actual
feature or operation.


Forward Collision-
Avoidance Assist Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
If needed, pull the mirror firmly until it folds
QUICK TIP
Refer to section 4 in the Owner’s Manual for more information.
DRIVER'S PANEL

13ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED
(Button located left of
Steering Wheel)
Power Windows, Window Lock & Central Door Lock
A Pull/Press to operate Front Windows Auto Up/Down*
B Press to Unlock /Lock All Doors
C Press to disable Rear Passenger Windows and Rear Sunroof* passenger controls
REMINDER: When C is pressed, window controls for the Rear Passenger Windows are disabled

Refer to section 4 in the Owner’s Manual for more information.
Power Folding Outside Mirrors *
Press the L or R buttons D to select the mirror to adjust
Press button arrows
E left /right or up/down to adjust mirror position
Toggle button
F left /right to unfold/fold the outside rearview mirrors
Toggle button
F to center to automatically fold/unfold mirrors when:

• The Smart Key* Lock /Unlock buttons are pressed

• The door outside handle button is pressed

•

•Auto Door Lock /Unlock* will engage when the gear shift is moved into or out of the P (Park) position

•To turn Auto Door Lock /Unlock* OFF, go to User Settings* in the LCD Instrument Cluster modes
QUICK TIPS

•

•The mirrors will automatically unfold when the Smart Key* is within close proximity to the vehicle

•To automatically fold mirrors when exiting vehicle, press the LOCK button once on the Smart Key*
QUICK TIPS


Press button again to stop Auto Up/Down function QUICK TIP
Power/Heated Outside Mirrors*
Mirror heaters automatically turn ON/OFF at the same time
the Rear Window Defroster is turned ON/OFF The Rear
Window Defroster button* is located on the climate control
system panel
Refer to section 4 in the Owner’s Manual for more information.
Automatic Door Lock/Unlock
When the gear shift is moved into or out of P (Park), all doors
will Lock /Unlock Refer to the User Settings on how to turn
Auto Door Lock /Unlock ON/OFF
Refer to section 4 in the Owner’s Manual for more information.
Fuel Filler Lid Release Button
Press the Fuel Filler Lid Release button
to release the fuel door
Refer to section 4 in the
Owner’s Manual for more
information..
REMINDER:
To lock position of mirrors, toggle switch to the neutral (center) position
Refer to section 4 in the Owner’s Manual for more information.
A
B
F
CE
D
D
(Button/switch panel located on Driver’s Door )
Button configuration may vary depending on vehicle model.
DRIVER'S PANEL

SEDONA FEATURES & FUNCTIONS GUIDE14*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
(Button/switch panel located on Driver's Door )


Engine Start/Stop Button
& Smart Key Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
Reverse Parking Aid Function *
The left or right mirror buttons A need to be depressed
for the Reverse Parking Aid Function to operate
When the gear shift lever is moved into R (Reverse)
and while the vehicle is moving backwards, the outside
rearview mirrors
B will rotate downward to aid in
reverse parking
To turn OFF the function, press the L or R buttons
again.
The outside rearview mirrors will automatically return
to their original positions when:

• The Engine Start /Stop Button is in the OFF position

• The gear shift lever is moved to any position except
R (Reverse)

•
Outside rearview mirror switches are not depressed
REMINDER: When the outside rearview mirror buttons (L or R) A are
not depressed, the Reverse Parking Aid Function will not operate and the
outside rearview mirrors will not rotate downward
Refer to section 4 in the Owner’s Manual for more information.


To use electrical accessories:
ACC position

•When in the OFF position and without depressing the brake
pedal, press the ENGINE START/STOP button once (amber light)
ON position

•When already in the ACC position (orange light) and without
depressing the brake pedal, press the ENGINE START/STOP
button again (reddish orange light)

•
When in the OFF position and without depressing the brake
pedal, press the ENGINE START/STOP button twice (reddish
orange light)
Keeping the vehicle in ACC or the ON position for extended periods
of time without turning the engine on may discharge the vehicle’s
battery
QUICK TIPS
Engine Start/Stop Button *†9
To start the engine:
1 Depress the brake pedal
2
Press the ENGINE START/STOP button
while the gear shift is in P (Park)
To turn the engine OFF: Press the ENGINE
START/STOP button
To use the ENGINE START/STOP button, you must have the
Smart Key fob inside the vehicle
REMINDERS:

•
In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position
by pressing the ENGINE START/STOP button for more than 2 seconds or 3 times successively within 3 seconds

•
If Smart Key fob battery is dead, with the lock button facing the ENGINE START/STOP button, hold the fob up
against the ENGINE START/STOP button and press to start the engine while pressing the brake pedal
Refer to section 5 in the Owner’s Manual for more information.
A
B
DRIVER'S PANEL

15ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
Headlight position
Parking light position
AUTOAuto Light* / HBA*
OFFOFF position
It may be helpful to pull/push the bottom of the
Steering Wheel towards/away from you to adjust the
desired distance prior to adjusting the angle
QUICK TIP
REMINDERS:
•HBA will operate when vehicle speed exceeds 25 mph
•
If the lever is pushed away from you while HBA is operational, HBA will turn off and the high beams will be on continuously
If the lever is pulled toward you while HBA is operational, HBA will turn off

•
If the light switch is switched to the headlight position, HBA will turn off and low beams will be on continuously
Tilt/Telescoping Steering Wheel†2 5
To adjust the Steering Wheel, press the Lock-
Release Lever A down and adjust B to the
desired angle and C distance
When finished, pull the Lock-Release Lever
A
up to lock the Steering Wheel in place
Headlights & High Beams
To o p e r a t e :

• Rotate the switch to change
the Headlight function

• Push the lever to turn High Beams ON

• Pull the lever to flash Headlights /
High Beams
AUTO Light function* — When the light switch is in the AUTO Light position, the tail lights and
headlights will turn ON/OFF automatically depending on the amount of light outside the vehicle
High Beam Assist (HBA)* — The High Beam Assist is designed to automatically adjust the headlight
range by switching between high and low beams based on light detected from oncoming vehicles and
road conditions
To enable HBA, toggle the light switch to the AUTO Light position and turn on the high beams by
pushing the lever away from you The High Beam Assist indicator
will illuminate

Refer to section 4 in the Owner’s Manual for more information.
Refer to section 4 in the Owner’s Manual for more information.A
B
C
STEERING WHEEL CONTROLS

SEDONA FEATURES & FUNCTIONS GUIDE16*IF EQUIPPED
M I S T:
Single wipe
OFF: Wiper off
I N T: Intermittent wipe
LO: Slow wipe
HI: Fast wipe
PUSH
FRONT
PULL
FRONT
PUSH
PULL
PUSH
FRONT
PULL
FRONT
PUSH
PULL
HI: Fast wipe
LO: Slow wipe
OFF: Wiper off
This illustration is for demonstration purposes only. Actual feature on vehicle
may vary. Refer to section 4 in the Owner’s Manual for more information.
These illustrations are for demonstration purposes only.
Actual feature on vehicle may vary.
Refer to section 4 in the Owner’s Manual for more
information.
A
B
Windshield Wipers & Washers
To o p e r a t e :

• Move lever Up/Down to change wiper modes

• Press button
B Up/Down to adjust Intermittent Wipe Speed

• Pull lever to spray and wipe
Rear Wiper & Washer
To operate:

• Rotate Rear Wiper switch to change Wiper modes

• Push to spray and wipe
LO and HI sets the wiper speed There is no
intermittent wipe function on the Rear Wipers
QUICK TIP
• Pressing button B up increases Intermittent wipe frequency and wipe
speed Pressing the button down decreases the frequency of wipes
• Set the wiper to the OFF position when the wiper is not in use
QUICK TIPS
Turn Signals & Fog Lights*
To o p e r a t e :

• Turn Signals - Move lever Up/Down for Right /Left Turn Signal

• Fog Lights - Press switch
A up/down to turn Fog Lights
ON/OFF

REMINDER: Headlights must be ON for Fog Light operation
The One-Touch Lane Change Signal is activated by briefly
pressing the Turn Signal Lever slightly for less than 1 second
and then releasing The lane change signal will blink 3 times
To change how many times (3/5/7) the Lane Change Signal
blinks, go to the User Settings Mode in the LCD Instrument
Cluster modes
Refer to section 4 in the Owner’s Manual for more information.
STEERING WHEEL CONTROLS

17ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
(Type B shown)
Cruise Control†2 3
A CRUISE Control ON/OFF butt on: Press to turn the Cruise Control ON/OFF
(CRUISE indicator will illuminate on the Instrument Cluster when ON)
B Resume Cruising Speed button: Press up to resume or increase the
cruising speed
Set Cruising Speed button: Press down to set or decrease the cruising speed
C Cruise Control CANCEL button: To cancel the Cruise Control setting, do one of the following:

• Press the brake pedal

• Press the CANCEL but ton


•Cruise Control is designed to function above 20 mph

•The Cruise Control system will not activate until the brake pedal has been depressed
at least once after ignition ON or engine start
QUICK TIPS
REMINDER: Cruise Control is a part of Smart Cruise Control with Stop and Go* and can be set as the operating mode To switch
from Smart Cruise Control (SCC) to Cruise Control, press and hold the CRUISE button A (the SCC system must not be activated
to change modes) Repeat to switch back to SCC mode

Your vehicle’s steering wheel buttons may differ from those in the illustrations.
Refer to section 5 in the Owner’s Manual for more information.
A
B
C
STEERING WHEEL CONTROLS

SEDONA FEATURES & FUNCTIONS GUIDE18*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
Smart Cruise Control (SCC) with Stop & Go System *†6,23
The Smart Cruise Control (SCC) with Stop & Go System is designed to maintain a predetermined
distance from vehicles detected ahead by automatically adjusting the driving speed as needed
When traffic is detected, the vehicle will slow down to maintain a set distance behind
traffic without depressing the accelerator or brake pedal
With the SCC on and activated and the vehicle-to-vehicle distance set, when the system detects
a vehicle slowing or stopping, it can bring the vehicle to a complete stop When the vehicle ahead
starts to move forward, the SCC system re-engages If the vehicle ahead stops for more than 3
seconds, the accelerator pedal or the RES+ button must be pressed to start moving the vehicle
To set/adjust the SCC speed:

• Press the CRUISE button
A to turn the system ON The CRUISE indicator will illuminate on the
instrument cluster Accelerate/decelerate to the desired speed

• Press the RES+/SET- button
B down to set the speed The SET indicator light will illuminate
The set speed and vehicle-to-vehicle distance will illuminate on the LCD screen Press the
RES+/SET- button
B up/down to increase/decrease the set speed
To adjust the vehicle-to-vehicle distance setting
C, press the SCC button D on the steering
wheel Images on the LCD screen E will change when scrolling through the settings
To cancel SCC operation: Press the CANCEL button
F or press the brake pedal The CRUISE
indicator on the instrument cluster will turn OFF
To turn the system OFF, press the CRUISE button
A The CRUISE indicator on the instrument
cluster will turn OFF
( Type B; buttons located on
right side of Steering Wheel)
Images are for illustrative purposes
only and may not reflect actual feature
or operation. Actual images or buttons
on vehicle may vary.
Refer to section 5 in the Owner’s
Manual for more information.
REMINDER: Distances are
approximate, based on 56 mph
vehicle speed The SCC vehicle-
to-vehicle distance increments are
based on vehicle speed
A
B
F
E
D


Smart Cruise Control (SCC)
with Stop & Go Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
STEERING WHEEL CONTROLS
17 2 f t 13 0 f t
82ft 10 6 f t
C