height adjustment Lancia Delta 2008 Owner handbook (in English)

46GETTING TO KNOW YOUR CAR
Height adjustment fig. 16
Operate lever C to raise or lower the rear part of the seat
cushion to improve comfort.
Lumbar adjustment (driver’s seat) fig. 16
for lumbar adjustment, turn knob D.
ELECTRICALLY ADJUSTABLE FRONT SEATS
(where provided) fig. 17
Adjustment is possible when the ignition key is at MAR or
within 1 minute with ignition key at STOP or removed.
When opening one of the front doors, it is possible to ad-
just the seat on the side of the door opened for about 3
minutes or until closing the door.
Seat adjustment controls are the following:
Multifunction control A:
to adjust height;
to move seat backwards or forwards.
Multifunction control B:
back rest angle adjustment;
lumbar adjustment.Seat warming (where provided) fig. 17
With ignition key at MAR, press buttons
Cto switch the
seat warming on/off.
The led on the button will light up when the function is
on.
fig. 17L0E0009m

48GETTING TO KNOW YOUR CAR
HEAD RESTRAINTS
FRONT fig. 19
The height of the head restraints can be adjusted as fol-
lows.
Upward adjustment: raise the head restraint until you
hear it click.
Downward adjustment: press button A and lower the
head restraint.
fig. 19L0E0011m
REAR (where provided) fig. 19
Headrests can be adjusted in height:
To adjust upwards: Press button C and lift the head
restraint until the lock clicks.
To adjust downwards: press button C and lower the
head restraint.
IMPORTANT Rear seat passengers should always set the
head restraints in “fully drawn out” position.
Perform these operations only when the car
is stationary and the engine is not running.
The head restraints must be adjusted so that
they support your head and not your neck. Only then
do they fulfil their protective action. To optimise
head restraint protective action, adjust the backrest
upright and keep your head as close as possible to
the head restraint.