weight Lancia Delta 2011 Owner handbook (in English)

252TECHNICAL SPECIFICATIONS
IDENTIFICATION DATA
The vehicle identification details are, fig. 1:
1 V.I.N. plate (located in the right side of the front
cross member);
2 Bodyshell marking (located on the passenger com-
partment floor, next to the passenger side front seat);
3 Bodywork paint identification plate (located in the left
side of the front crossmember);
4 Engine marking (located on the left rear section, gear-
box side).V.I.N. PLATE fig. 2
This plate is fitted to the engine compartment front cross-
member and contains the following data:
B Type-approval number.
C Vehicle type identification code.
D Chassis number.
E Maximum authorised weight of vehicle fully laden.
F Maximum authorised weight of vehicle fully laden
plus trailer.
G Maximum authorised weight on first axle (front).
H Maximum permitted weight on second (rear) axle.
I Engine type.
L Bodywork version code.
M Spares number.
N Correct value of smoke coefficient (for diesel engines).
fig. 1L0E0116mfig. 2L0E0117m

1410
570
1090
950
1980
1300
600
80
601320
570
1090
950
1890
1300/600()
600
80
60
TECHNICAL SPECIFICATIONS267
6
WEIGHTS
Weights (kg) 1.4 Turbo Jet
1.4 Turbo Multi Air 1.6 Multijet
Unladen weight (with all fluids, fuel tank
filled to 90% and without optional equipment):
Payload (*) including the driver:
Maximum allowed loads (**)
– front axle:
– rear axle:
– total:
Towable loads
– trailer with brakes:
– trailer without brakes:
Maximum load on roof:
Maximum load on the ball joint (braked trailer):
(*) If special equipment is fitted (sun roof, tow hook, etc.) the unladen weight increases and consequently the payload will
decrease, still complying with the maximum allowed loads.
(**) Loads not be exceeded. The driver is responsible for arranging goods in the luggage compartment and/or on the load carry-
ing platform within the maximum permitted loads.
() 1.4 Turbo Multi Air version

1430
570
1150
950
2000
1300
500
80
601430
570
1150
950
2000
1300
500
80
60
268TECHNICAL SPECIFICATIONS
Weights (kg) 1.9 Twin Turbo Multijet 2.0 Multijet
Unladen weight (with all fluids, fuel tank
filled to 90% and without optional equipment):
Payload (*) including the driver:
Maximum allowed loads (**)
– front axle:
– rear axle:
– total:
Towable loads
– trailer with brakes:
– trailer without brakes:
Maximum load on roof:
Maximum load on the ball joint (braked trailer):
(*) If special equipment is fitted (sun roof, tow hook, etc.) the unladen weight increases and consequently the payload will
decrease, still complying with the maximum allowed loads.
(**) Loads not be exceeded. The driver is responsible for arranging goods in the luggage compartment and/or on the load carry-
ing platform within the maximum permitted loads.

TECHNICAL SPECIFICATIONS273
6
FUEL CONSUMPTION
The fuel consumption figures given in the table below are
determined on the basis of the type-approval tests laid
down by specific European Directives.
The procedures below are followed for measuring con-
sumption:
❍urban cycle: cold starting followed by driving that
simulates urban use of the car;
❍extra-urban cycle: frequent accelerations in all gears,
simulating extra-urban use of the vehicle: speed varies
between 0 and 120 km/h;
❍combined consumption: calculated with a weighting
of about 37% of urban cycle consumption and about
63% of extra-urban consumption.IMPORTANT The type of route, traffic situations,
weather conditions, driving style, general conditions of
the car, trim level/equipment/accessories, load, climate
control system, roof rack, other situations that affect air
drag may lead to different fuel consumption levels than
those measured.
FUEL CONSUMPTION ACCORDING TO THE CURRENT EUROPEAN DIRECTIVE (litres/100 km)
1.4 Turbo Jet
120 HP1.4 Turbo Jet
150 HP1.4 Turbo
Multi Air1.6 Multijet1.9 Twin Turbo
Multijet2.0 Multijet
Urban8.18.97.35.97.36.9
Extra-urban5.25.54.84.14.74.3
6.36.85.74.85.75.3Combined

PRESCRIPTIONS FOR HANDLING THE VEHICLE
AT THE END OF ITS LIFE
Lancia has been committed for many years to safeguarding the environment through the constant improvement of its
production processes and manufacturing products that are increasingly compatible with the ecosystem. To assure
customers of the best possible service in terms of respecting environmental laws and in response to European Direc-
tive 2000/53/EC governing vehicles at the end of their life, Lancia is offering their customers the opportunity of
handing over their vehicle* at the end of its life without incurring any additional costs.
The European Directive sets out that when the vehicle is handed over the last keeper or owner should not incur any
expenses as a result of its market value. In particular, in almost all European Union countries, until 1
stJanuary 2007,
vehicles registered after 1stJuly 2002 will be collected free of charge, whilst from 2007 collection will be free of charge
irrespective of the year of registration as long as the vehicle contains its basic components (in particular, the engine and
bodywork) and has no additional waste.
To hand your vehicle over at the end of its life without extra cost, go to one of our Lancia dealerships or authorized
collection and scrapping centres. These centres have been carefully chosen to offer high quality service for the collec-
tion, treatment and recycling of vehicles at their end of life, respecting the surrounding environment.
You can find further information on these collection and scrapping centres either from a Lancia Dealership or by call-
ing the freephone number 00800 526242 00 or on the Lancia website.
*Vehicle for transporting passengers with a maximum of nine seats with a total permitted weight of 3.5 t

LIST OF CONTENTS283
7
Warning lights on panel ..... 9
Weights ...............................267
Wheel (changing) ................193
Wheel rims
– reading rim markings .....262
Wheels ................................260
When parked ......................175
Window cleaning washer ...... 65
Windows (cleaning) ............249
Windscreen wipers
– blades .............................245
– control ............................ 65
– nozzles ...........................246