seats Lancia Delta 2014 Owner handbook (in English)
[x] Cancel search | Manufacturer: LANCIA, Model Year: 2014, Model line: Delta, Model: Lancia Delta 2014Pages: 291, PDF Size: 5.24 MB
Page 54 of 291
52KNOWING YOUR CAR
SEATS
FRONT SEATS fig. 20
Long itudinal adjustment
Lift the lever A and pus h the seat forwards or backwards :
in the driving po sition your arms s hould res t on the rim
of the s teering wheel.
Backrest an gle adjustment
Turn knob B.
All adjustments on the front and rear seats
must be made with the car stationary.
After releasing the adjustment levers always
check that the seat is locked into place by try-
ing to move it back and forth. If the seat is not
locked into place, it may unexpectedly slide and
cause the driver to lose control of the car.
fig. 20L0E0008m
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 52
Page 55 of 291
KNOWING YOUR CAR53
1
Height adjustment
Operate lever C to rai se or lower the rear part of the seat
cus hion to improve comfort.
Lumbar adjustment (driver’s seat)
The pos ition of the back again st the s eat backres t is ad-
jus ted by turning knob D.
FRONT SEATS WITH ELEC TRIC ADJUS TMENT
fig . 21 (for vers ions/markets where provided
The adjus tment is possible with the ignition key to MAR
or for up to 1 minute with the ignition ke y turned to OFF
or extracted.
When the front doors are opened the seat on the side of
the door that has been opened can be moved for about 3
minutes or until the door i s clos ed.
The controls for seat adjustment are:
Multifunction control A:
❍ seat height adjus tment;
❍ lengthwis e seat movement.
Multifunction control B:
❍ backres t angle adju stment;
❍ backres t lumbar adju stment. S
eat heating (for versions/markets , wher
e provided)
With the key turned to MAR, press buttons
Cto switch
the function on/off.
When the function is enabled, the LED on the button turns
on.
fig. 21L0E0009m
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 53
Page 56 of 291
54KNOWING YOUR CAR
REAR SEATS
Backrest angle adjustment
Lift lever A - fig. 22 (one on each side) for backres t an-
gle adjus tment, for the left or right part of the backre st re-
s pectively (to facilitate thi s operation, s lightly move the
s eat forwards using lever B).
Rear seat movement
(for vers ions/markets , where provided)
The rear s eats can be moved backwards and forwards (by
80 mm). To move the seats backwards or forwards oper-
ate the levers B (one on each side).
fig. 22L0E0010m
“Fixed” type rear seats
(for vers ions/markets , where provided)
In some vers ions, rear s eats are “fixed” ty pe and the back-
re st angle adjus tment is possible if the luggage compart-
ment is extended. Us e lever A-fig. 23 (one each side) for
backres t angle adjus tment.
When repositioning the rear backrest dur-
ing its movement, check that it has been at-
tached correctly, grasping the backrest at the
top and shaking it.
fig. 23L0E0231m
Before tilting the backrests, make sure that the
seat belts are fully stretched, without any
twisting.
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 54
Page 83 of 291
KNOWING YOUR CAR81
1
INTERIOR FITTINGS
SUN VIS ORS fig. 44
They are located at the s ides of the interior rear view
mirror.
They can be adju sted forwards and sideways.
A mirror is provided on the back of the sun vis ors.
This is illuminated by roof light A. The driver and pas -
s enger-s ide sun vis ors als o feature a document holder.
IMPORTANT On both sides of the passenger side sun vi-
s or there is a label remembering that it i s compuls ory to
deactivate the airbag s if a rearward facing child re straint
system i s fitted. Always comply with the instructions
on the label (s ee the “Front Airbag s” paragraph in chap-
ter “S afety”).
fig. 44L0E0032m
FRONT ARMRES T WITH STORAGE
C OMPARTMENTS
This is located between the front seats . A s torage com-
partment and cooled drinks compartment are located in-
s ide the armres t (for versions/markets , where provided)
( see following paragraphs ). The armrest can be moved
backwards and forward s b y operating the cover A - fig. 45.
S torag e compartment
Lift up cover A - fig. 45: you can thu s access the s torage
compartment B.
fig. 45L0E0033m
001-154 Delta GB 2ed 27/01/14 10.46 Pagina 81
Page 102 of 291
100KNOWING YOUR CAR
To extend the luggage compartment further, the rear seats
can be pus hed forwards by operating handle B - fig. 64 (for
vers ions /markets where provided).
IMPORTANT In order to achieve a uniforml y flat load
platform, the head re straints s hould be placed in the ful-
l y extended pos ition before the s eats are folded back. REPOS
ITIONING THE REAR S EAT
To facilitate the backres t repositioning manoeuvre, it is
helpful to bring the s eat cushion completel y forward be-
fore folding back the s eats.
Move the s eat belts to the side, making s ure that they are
correctly extended and not twi sted.
Press levers A - fig. 64, lift up the backre sts and pus h them
backwards until you hear a click from both attachment
mechanis ms. Us e handle B - fig. 64 (for vers ions/markets
wher
e provided) to move the seats back until y ou hear a
click.
Make sure the backrest is properly secured
at both sides to prevent it from moving for-
ward in the event of sharp braking, which
may cause injuries to passengers.
001-154 Delta GB 2ed 27/01/14 10.47 Pagina 100
Page 107 of 291
KNOWING YOUR CAR105
1HEADLIGHTS
LIGHT BEAM ALIGNMENT
The correct aiming of the headlights i s important for the
comfort and s afety of not only the driver but all other road
u sers . This is als o covered by a specific rule of the high-
way code.
The headlights must be correctly aimed to guarantee the
bes t vis ibility conditions for all drivers while travelling
with headlights on.
Contact a Lancia Dealer ship to have the headlight s prop-
erly adjus ted.
Check beam alignment every time the load or its distrib-
ution changes .
ANGLE COMPENS ATION fig .69
The car is fitted with an electric headlight alignment sys-
tem. This system i s operational with the ignition key
turned to MAR and the dipped beam headlight s on.
When the car is loaded, it slopes backward s. This mean s
the headlight beam ri se s.
In this case, it is necessary to adjust the beams using but-
tons A and B.
The dis play pr
ovides a visual indication of the pos itions
during adju stment. C
orrect positions dependin g on the load
Pos ition 0 - one or two people in the front seats .
Pos ition 1 - five passengers .
Pos ition 2 - five people + load in the boot.
Pos ition 3 - driver + maximum permitted load stowed in
the luggage compartment.
FRONT FOG LIGHT S ALIGNMENT
(for vers ions/markets where provided)
Contact a Lancia Dealer ship to have the headlight s prop-
erly adjus ted.
fig. 69L0E0054m
001-154 Delta GB 2ed 27/01/14 10.47 Pagina 105
Page 159 of 291
SAFETY
157
2
IMPORTANT After putting the seats back to their trav-
elling position, restore the seat belt position to make them
ready for use.
IMPORTANT If the rear seat is being moved and this caus-
es the middle seat belt to lock temporarily, normal con-
ditions can be restored simply by moving the seat towards
the back of the car.
fig. 2
L0E0062m
SBR SYSTEM The car is provided with the SBR (Seat Belt Reminder)
system, which warns the driver and the front passenger
if the seat belt is not fastened, as follows:
❍warning light
<
turns on constantly and continuous
activation of the acoustic signal for the first 6 seconds;
❍warning light
For long-term deactivation of the SBR system, contact a
Lancia Dealership.
The SBR system can be reactivated at any time through
the display Setup Menu (see chapter “1”).
155-182 Delta GB 1ed 26/08/13 11.29 Pagina 157
Page 161 of 291
SAFETY
159
2
GENERAL INSTRUCTIONS FOR USING
THE SEAT BELTS
The driver is responsible for complying with, and ensur-
ing that all the other occupants of the car also comply with,
the local laws in force in relation to the use of the seat belts.
Always fasten the seat belts before setting off.
Seat belts are also to be worn by pregnant women: the risk
of injury in the case of impact is greatly reduced for them
and the unborn child if they are wearing a seat belt.
Pregnant women must position the lower part of the belt
very low down so that it passes over the pelvis and under
the abdomen (see fig. 3). The best way to protect the un-
born child is to protect the mother. When a safety belt is
worn properly, it is more likely that the unborn child will
not be hurt in a crash. For pregnant women, as for any-
one, the key to making safety belts effective
is wearing
them properly.
For maximum protection, keep the backrest
upright, lean back into it and make sure the
seat belt fits closely across your chest and
pelvis. Always fasten the seat belts on both the front
and the rear seats! Travelling without wearing seat
belts will increase the risk of serious injury and even
death in the event of an accident.
fig. 3
L0E0404m
The belt must not be twisted. The upper part must pass
over the shoulder and cross the chest diagonally. The low-
er part must fit over the pelvis (as shown in fig. 4) rather
than the abdomen of the passenger.
Never use devices (clips, clamps, etc.) to hold the seat belt
away from your body.
Removing or otherwise tampering with seat
belt and pretensioner components is strictly
prohibited. Any operations on these compo-
nents must be performed by qualified and autho-
rised technicians. Always go to a Lancia Dealer-
ship.
155-182 Delta GB 1ed 26/08/13 11.29 Pagina 159
Page 166 of 291
164
SAFETY
Children from 9 to 18 kg may be carried in forward fac-
ing child restraint systems fig. 7. GROUP 1
The diagram is indicative and for fitting
purposes only. Refer to the instructions
which must be supplied with the child re-
straint system.
Child restraint systems with Isofix attach-
ments are available, which allow them to be
secured to the seat safely without using the
car seat belts. For this type of seats see paragraph
“ISOFIX child restraint system setup” in this
chapter.
fig. 7
L0E0408m
155-182 Delta GB 1ed 26/08/13 11.29 Pagina 164
Page 169 of 291
SAFETY
167
2
PASSENGER SEAT COMPLIANCE WITH REGULATIONS ON UNIVERSAL CHILD RESTRAINT SYSTEM USEThe car complies with the new European Directive 2000/3/EC which governs the arrangement possibilities for child
restraint systems on the various seats of the car as shown in the following table:Key:
U = suitable for restraint systems in the “Universal” category, according to European Regulation ECE-R44 for the specified
“Groups”.
(*) The rear seat backrest must be in the vertical position.
X = Seat not suitable for children in this weight category.
Front Rear Rear
Group Weight range passenger side passenger central passengerGroups 0, 0+ up to 13 kg U U (*)XGroup 1 9–18 kg U U (*)XGroup 2 15–25 kg U U (*)XGroup 3 22–36 kg U U (*)XVe r sions without rear fixed seat
155-182 Delta GB 1ed 26/08/13 11.29 Pagina 167